Italy

Officine Ambrogio Melesi e C.

Largo De Vecchi n° 11, 23813, Cortenova, Italy

ACCREDIA 01377ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 19
ACCREDIA certificate: 1
Site in our directory: 1

ACCREDIA accredited scope

What this lab is accredited for

Our reading of the ACCREDIA scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 19 standard numbers and the 17 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM15

ASTM A262Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

ASTM A370Standard Test Methods and Definitions for Mechanical Testing of Steel Products

Limits written next to it

ASTM A370-24a - solo/only Intaglio a

Written next to it on line 1 of ACCREDIA certificate 01377.

ASTM A923Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels

ASTM E3Standard Guide for Preparation of Metallographic Specimens

ASTM E10Standard Test Method for Brinell Hardness of Metallic MaterialsExclusion

Limits written next to it

ASTM E10-23 - escluso/except

Exclusion. Written next to it on line 1 of ACCREDIA certificate 01377.

ASTM E18Standard Test Methods for Rockwell Hardness of Metallic MaterialsExclusion

Limits written next to it

ASTM E18-25 - escluso/except

Exclusion. Written next to it on line 1 of ACCREDIA certificate 01377.

ASTM E23Standard Test Methods for Notched Bar Impact Testing of Metallic MaterialsSome methods

Limits written next to it

ASTM E23-25 - solo/only Intaglio a "V" Pendolo di Charpy

Some methods. Written next to it on line 1 of ACCREDIA certificate 01377.

ASTM E92Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials

ASTM E112Standard Test Methods for Determining Average Grain SizeSome clauses

Limits written next to it

ASTM E112-25 - solo/only paragrafo

Some clauses. Written next to it on line 1 of ACCREDIA certificate 01377.

ASTM E340Standard Practice for Macroetching Metals and Alloys

ASTM E407Standard Practice for Microetching Metals and Alloys

ASTM E562Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count

ASTM E1245

ASTM G28

ASTM G48Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution

ISO4

ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method

ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method

ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method

ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method

Read from the scope as published by ACCREDIA. Register refreshed 2026-11-06.

Scope as published by ACCREDIA

2 lines

ACCREDIA

ISO/IEC 17025

Active

01377

View scope

Accredited scope, certificate 01377

Line	Method	Matrix	Range
1	ASTM A262-15(2021); ASTM A923-25; ASTM G48-25; ASTM G28-24; ASTM E1245-03(2023); ASTM E112-25; UNI EN ISO 6506-1:2015; ASTM E10-23; UNI EN ISO 6508-1:2024; ASTM E18-25; ASTM E92-23; UNI EN ISO 6507-1:2023; ASTM E340-23; ASTM E3-11(2025); ASTM E407-23; ASTM E562-19e1; UNI EN ISO 148-1:2016; ASTM E23-25; ASTM A370-24a	Metal	0 to 450 J
2	Extracted from the scope document; tables may not line up. View scope for the original. Officine Ambrogio Melesi e C. srl Largo De Vecchi n° 11 23813 Cortenova LC Legenda/Note Allegato al certificato di accreditamento n. 01377 rev. 3 del 23/01/2025 UNI CEI EN ISO/IEC 17025:2018 Revisione: 22 Sede A Data: 11/12/2025 pag. 2 di 2 Il simbolo (1), se presente, indica: "Materiale/Prodotto/Matrice" non previsto dal metodo ma assimilabile/The symbol (1), if present, means: Material/Product/Matrix not provided for by the method but acceptable Per la definizione della “categoria" di prova indicata nel titolo, si veda il Regolamento Generale ACCREDIA RG-02/For the definition of the test “category” indicated in the title, see ACCREDIA General Regulation RG-02. Il QRcode consente di accedere direttamente al sito www.accredia.it per verificare la validità dell'elenco prove e del certificato di accreditamento rilasciato al laboratorio/The QRcode allows to directly access to the website www.accredia.it to verify the validity of the test list and of the accreditation certificate issued to the laboratory. L’eventuale simbolo “X” riportato nella colonna “O&I” indica che il laboratorio è accreditato anche per fornire opinioni e interpretazioni basate sui risultati delle specifiche prove contrassegnate/Any "X" symbol in the "O&I" column indicates that the laboratory is also accredited to provide opinions and interpretations based on the results of the specific marked tests. L'eventuale simbolo () indica che è attiva una sospensione dell’accreditamento per la specifica attività riportata a fianco/Any symbol () indicates that a suspension of accreditation is active for the specific activity shown next to it.

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Largo De Vecchi n° 11, Cortenova, 23813, IT

46.00169, 9.38639

Open in Maps

← All accredited testing labs in Italy

Labs with overlapping accredited scope in Italy

Accreditation data refreshed from the ACCREDIA register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ACCREDIA entry linked above.