Italy

Ianni & Partners

Via dell'Acacia, 38, 28021, Borgomanero, Italy

ACCREDIA|01357ISO/IEC 17025Register refreshed 2026-09-25

Certificates

Scope items

Standards

Locations

Free. We check which accredited labs can do it, starting with this one, and reply within two working days with who can do it, how fast, and roughly what it costs.

Only the laboratory you pick gets your contact details. We ask the others without them.

Contact this laboratory

Visit website Open ACCREDIA register entry

Work at Ianni & Partners?

Claim this profile to keep it accurate.

Register record

ACCREDIARefreshed 2026-09-25: 01357Active

Accredited standards

Our reading of the ACCREDIA scope: each standard once, with its official name where we have checked it. Click a standard to see the scope line it comes from, word for word.

ISO

ISO 580Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating

As written on the certificate · Line 1 (ACCREDIA 01357)

EN ISO 3126:2005; ISO 3126:2005; UNI EN ISO 3126:2005; ISO 13956:2010; ISO FDIS 13956:2025; EN 12814-1:1999/AC:2003; UNI EN 12814-1:2001; EN 12814-4:2018/AC:2018 cap 7; UNI EN 12814-4:2018/EC1:2019 cap 7; EN 12814-4:2018/AC:2018 cap 6; UNI EN 12814-4:2018/EC1:2019 cap 6; EN 12814-4:2018/AC:2018 cap 5; UNI EN 12814-4:2018/EC1:2019 cap 5; EN 12814-2:2021; UNI EN 12814-2:2021; EN ISO 1183-1:2025 Met A; ISO 1183-1:2025 Met A; UNI EN ISO 1183-1:2025 Met A; EN ISO 1133-1:2022; ISO 1133-1:2022; UNI EN ISO 1133-1:2022; EN ISO 11357-1:2023 + EN ISO 11357-6:2025; ISO 11357-1:2023 + ISO 11357-6:2025; UNI EN ISO 11357-1:2023 + UNI EN ISO 11357-6:2025; EN ISO 580:2005; ISO 580:2005; UNI EN ISO 580:2005; ISO 12091:1995; EN ISO 13968:2008; ISO 13968:2008; UNI EN ISO 13968:2009; UNI EN ISO 6259-1:2015; UNI EN ISO 6259-2:2020; UNI EN ISO 6259-3:2015; EN ISO 3127:2017; ISO 3127:1994; UNI EN ISO 3127:2018; EN ISO 9969:2016; ISO 9969:2016; UNI EN ISO 9969:2016; UNI EN ISO 2505:2023

ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method

As written on the certificate · Line 1 (ACCREDIA 01357)

ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method

As written on the certificate · Line 1 (ACCREDIA 01357)

ISO 2505Thermoplastics pipes - Longitudinal reversion - Test method and parameters

As written on the certificate · Line 1 (ACCREDIA 01357)

ISO 3126Plastics piping systems - Plastics components - Determination of dimensions

As written on the certificate · Line 1 (ACCREDIA 01357)

ISO 3127Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method

As written on the certificate · Line 1 (ACCREDIA 01357)

ISO 9969Thermoplastics pipes - Determination of ring stiffness

As written on the certificate · Line 1 (ACCREDIA 01357)

ISO 11357-1Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles

As written on the certificate · Line 1 (ACCREDIA 01357)

ISO 11357-6Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

As written on the certificate · Line 1 (ACCREDIA 01357)

ISO 12091Structured-wall thermoplastics pipes - Oven test

As written on the certificate · Line 1 (ACCREDIA 01357)

ISO 13953Polyethylene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint

As written on the certificate · Line 2 (ACCREDIA 01357)

ISO 13954:1997/Amd1:2020; ISO 13955:1997/Amd1:2020; ISO 13953:2001/Amd1:2020; EN ISO 1167-1:2006; EN ISO 1167-2:2006; EN ISO 1167-3:2007; EN ISO 1167-4:2007; ISO 1167-1:2006; ISO 1167-2:2006; ISO 1167-3:2007; ISO 1167-4:2007; UNI EN ISO 1167-1:2006; UNI EN ISO 1167-2:2006; UNI EN ISO 1167-3:2008; UNI EN ISO 1167-4:2008

ISO 13954Plastics pipes and fittings - Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm

As written on the certificate · Line 2 (ACCREDIA 01357)

ISO 13955Plastics pipes and fittings - Crushing decohesion test for polyethylene (PE) electrofusion assemblies

As written on the certificate · Line 2 (ACCREDIA 01357)

ISO 13956Plastics pipes and fittings - Decohesion test of polyethylene (PE) saddle fusion joints - Evaluation of ductility of fusion joint interface by tear test

As written on the certificate · Line 1 (ACCREDIA 01357)

ISO 13968Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility

As written on the certificate · Line 1 (ACCREDIA 01357)

ISO 1167 series

ISO 1167-1Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method

As written on the certificate · Line 2 (ACCREDIA 01357)

ISO 1167-2Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces

As written on the certificate · Line 2 (ACCREDIA 01357)

ISO 1167-3Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components

As written on the certificate · Line 2 (ACCREDIA 01357)

ISO 1167-4Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies

As written on the certificate · Line 2 (ACCREDIA 01357)

EN 12814 series

EN 12814-1Name not checked yet

As written on the certificate · Line 1 (ACCREDIA 01357)

EN 12814-2Name not checked yet

As written on the certificate · Line 1 (ACCREDIA 01357)

EN 12814-4Name not checked yet

As written on the certificate · Line 1 (ACCREDIA 01357)

ISO 6259 series

ISO 6259-1Thermoplastics pipes - Determination of tensile properties - Part 1: General test method

As written on the certificate · Line 1 (ACCREDIA 01357)

ISO 6259-2Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)

As written on the certificate · Line 1 (ACCREDIA 01357)

ISO 6259-3Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes

As written on the certificate · Line 1 (ACCREDIA 01357)

Scope as published by ACCREDIA

2 lines

ACCREDIA

ISO/IEC 17025

Active

01357

View scope

Accredited scope, certificate 01357

Line	Discipline	Method	Matrix	Range
1	materials	EN ISO 3126:2005; ISO 3126:2005; UNI EN ISO 3126:2005; ISO 13956:2010; ISO FDIS 13956:2025; EN 12814-1:1999/AC:2003; UNI EN 12814-1:2001; EN 12814-4:2018/AC:2018 cap 7; UNI EN 12814-4:2018/EC1:2019 cap 7; EN 12814-4:2018/AC:2018 cap 6; UNI EN 12814-4:2018/EC1:2019 cap 6; EN 12814-4:2018/AC:2018 cap 5; UNI EN 12814-4:2018/EC1:2019 cap 5; EN 12814-2:2021; UNI EN 12814-2:2021; EN ISO 1183-1:2025 Met A; ISO 1183-1:2025 Met A; UNI EN ISO 1183-1:2025 Met A; EN ISO 1133-1:2022; ISO 1133-1:2022; UNI EN ISO 1133-1:2022; EN ISO 11357-1:2023 + EN ISO 11357-6:2025; ISO 11357-1:2023 + ISO 11357-6:2025; UNI EN ISO 11357-1:2023 + UNI EN ISO 11357-6:2025; EN ISO 580:2005; ISO 580:2005; UNI EN ISO 580:2005; ISO 12091:1995; EN ISO 13968:2008; ISO 13968:2008; UNI EN ISO 13968:2009; UNI EN ISO 6259-1:2015; UNI EN ISO 6259-2:2020; UNI EN ISO 6259-3:2015; EN ISO 3127:2017; ISO 3127:1994; UNI EN ISO 3127:2018; EN ISO 9969:2016; ISO 9969:2016; UNI EN ISO 9969:2016; UNI EN ISO 2505:2023	Componenti di materiale plastico/Plastics components; Giunti a fusione a sella in polietilene (PE)/Polyethylene (PE) saddle fusion joints; Giunti saldati di prodotti semifiniti di materiale termoplastico/Welded joints of thermoplastics semi-finished products; Materie plastiche non alveolari /Non-cellular plastics; Materie plastiche/Plastics; Raccordi di materiale termoplastico/Thermoplastics fittings; Tubi a parete strutturata di materiale termoplastico/Structured-wall thermoplastics pipes; Tubi di materiale termoplastico/Thermoplastics pipes	-
2	materials	ISO 13954:1997/Amd1:2020; ISO 13955:1997/Amd1:2020; ISO 13953:2001/Amd1:2020; EN ISO 1167-1:2006; EN ISO 1167-2:2006; EN ISO 1167-3:2007; EN ISO 1167-4:2007; ISO 1167-1:2006; ISO 1167-2:2006; ISO 1167-3:2007; ISO 1167-4:2007; UNI EN ISO 1167-1:2006; UNI EN ISO 1167-2:2006; UNI EN ISO 1167-3:2008; UNI EN ISO 1167-4:2008	Tubi e raccordi in polietilene (PE)/Polyethylene (PE) pipes and fittings; Tubi, raccordi e assiemi in materiale termoplastico per il trasporto di fluidi/Thermoplastics pipes, fittings and assemblies for the conveyance of fluids	-

Ranges are reproduced from the accredited scope document as published. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Via dell'Acacia, 38, Borgomanero, 28021, IT

45.69990, 8.46235

Open in Maps

← All accredited testing labs in Italy

Accreditation data refreshed from the ACCREDIA register on 2026-09-25.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ACCREDIA entry linked above.