Materialforschungs- und -prüfanstalt an der Bauhaus-Universität Weimar
Coudraystraße 9, 99423, Weimar, Germany
- Accredited standards
- 231
- DAKKS certificates
- 4
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 231 standard numbers and the 82 official names we hold. When no standard matches, it searches the method text of every scope line.
EN43
EN 413-2
EN 445
EN 450-1
EN 451-2
EN 459-2
EN 538
EN 539-1
EN 539-2
EN 932-1Tests for general properties of aggregates - Part 1: Methods for sampling
EN 932-2Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples
EN 934-6
EN 1008
Show all 43
EN 1024
EN 1744-1Tests for chemical properties of aggregates - Part 1: Chemical analysis
EN 1925
EN 1926
EN 1934
EN 1936
EN 12371
EN 12372
EN 12664
EN 12667
EN 13055-1
EN 13055-2
EN 13137Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments
EN 13161
EN 13179-1
EN 13279-2
EN 13282-1
EN 13282-2
EN 13286-47
EN 13346Characterization of sludges - Determination of trace elements and phosphorus - Aqua regia extraction methods
EN 13529
EN 13639
EN 13755
EN 14196
EN 14582
EN 14629
EN 15037-3
EN 15934Sludge, treated biowaste, soil and waste - Calculation of dry matter fraction after determination of dry residue or water content
EN 15936Soil, waste, treated biowaste and sludge - Determination of total organic carbon (TOC) by dry combustion
EN 16416
EN 27888Water quality - Determination of electrical conductivity
ISO34
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 527-3Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 1295
ISO 2409Paints and varnishes - Cross-cut test
ISO 3451-1Plastics - Determination of ash - Part 1: General methods
ISO 3451-5Plastics - Determination of ash - Part 5: Poly(vinyl chloride)
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 6988Metallic and other non organic coatings - Sulfur dioxide test with general condensation of moisture
ISO 9022-20Optics and photonics - Environmental test methods - Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide
ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
Show all 34
ISO 9862Geosynthetics - Sampling and preparation of test specimens
ISO 9863-1Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers
ISO 9864Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products
ISO 10062Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
ISO 10304-1Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
ISO 10319Geosynthetics - Wide-width tensile test
ISO 10321Geosynthetics - Tensile test for joints/seams by wide-width strip method
ISO 10523Water quality - Determination of pH
ISO 11274Soil quality - Determination of the water-retention characteristic - Laboratory methods
ISO 11885Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
ISO 11997-1Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid
ISO 12236Geosynthetics - Static puncture test (CBR test)
ISO 12570Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature
ISO 12571Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties
ISO 12572Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method
ISO 12956Geotextiles and geotextile-related products - Determination of the characteristic opening size
ISO 12958-1Geotextiles and geotextile-related products - Determination of water flow capacity in their plane - Part 1: Index test
ISO 12958-2Geotextiles and geotextile-related products - Determination of water flow capacity in their plane - Part 2: Performance test
ISO 13426-2Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites
ISO 17294-2Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes
ISO 25619-1Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties
ISO 25619-2Geosynthetics - Determination of compression behaviour - Part 2: Determination of short-term compression behaviour
DIN31
DIN 1048
DIN 1048-5
DIN 1053-3
DIN 4160
DIN 18121-2
DIN 18122-2
DIN 18125-2
DIN 18126
DIN 18127
DIN 18128
DIN 18129
DIN 18130-1
Show all 31
DIN 18132
DIN 18134
DIN 18137-3
DIN 18141-1
DIN 18196
DIN 19573
DIN 19682-1
DIN 19682-2
DIN 19747Investigation of solids - Pre-treatment, preparation and processing of samples for chemical, biological and physical investigations
DIN 38404-4
DIN 38406-13
DIN 38406-14
DIN 38409-1
DIN 50018
DIN 50100
DIN 52099
DIN 52115-2
DIN 55635
DIN 66137-2
IEC 60068 series20
IEC 60068-2-1Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60068-2-2Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-6Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
IEC 60068-2-11Environmental testing - Part 2-11: Tests - Test Ka: Salt mist
IEC 60068-2-13
IEC 60068-2-14Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60068-2-27Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 60068-2-30Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC 60068-2-39
IEC 60068-2-40
IEC 60068-2-41
IEC 60068-2-42
Show all 20
IEC 60068-2-43
IEC 60068-2-47
IEC 60068-2-49
IEC 60068-2-52Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
IEC 60068-2-53
IEC 60068-2-60
IEC 60068-2-64Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
IEC 60068-2-78Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
EN 1015 series11
EN 1015-2
EN 1015-3
EN 1015-4
EN 1015-6
EN 1015-7
EN 1015-9
EN 1015-10
EN 1015-11
EN 1015-12
EN 1015-18
EN 1015-19
EN 772 series11
EN 772-1
EN 772-3
EN 772-4
EN 772-5
EN 772-9
EN 772-11
EN 772-13
EN 772-16
EN 772-20
EN 772-21
EN 772-22
EN 480 series9
EN 480-1
EN 480-2
EN 480-5
EN 480-6
EN 480-8
EN 480-10
EN 480-11
EN 480-12
EN 480-14
ISO 17892 series9
ISO 17892-1Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content
ISO 17892-2Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density
ISO 17892-3Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density
ISO 17892-4Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO 17892-5Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test
ISO 17892-7Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test
ISO 17892-10Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests
ISO 17892-11Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests
ISO 17892-12Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits
ISO 4628 series9
ISO 4628-1Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system
ISO 4628-2Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
ISO 4628-3Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
ISO 4628-4Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
ISO 4628-5Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking
ISO 4628-6Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method
ISO 4628-7Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method
ISO 4628-8Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect
ISO 4628-10Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion
EN 196 series8
EN 196-1
EN 196-2Methods of testing cement - Part 2: Chemical analysis of cement
EN 196-3
EN 196-5
EN 196-6
EN 196-7
EN 196-8
EN 196-10
EN 1097 series6
EN 1097-2Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
EN 1097-3
EN 1097-4
EN 1097-5Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven
EN 1097-6Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 1097-7
EN 12390 series5
EN 12390-3Testing hardened concrete - Part 3: Compressive strength of test specimens
EN 12390-5
EN 12390-6
EN 12390-7Testing hardened concrete - Part 7: Density of hardened concrete
EN 12390-8
EN 12566 series5
EN 12566-1
EN 12566-3
EN 12566-4
EN 12566-6
EN 12566-7
EN 1367 series5
EN 1367-1
EN 1367-5
EN 1367-6
EN 1367-7
EN 1367-8
EN 933 series5
EN 933-1Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
EN 933-4Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index
EN 933-6
EN 933-9
EN 933-10
ASTM4
ASTM D5887
ASTM D5890
ASTM D5891
ASTM D6496
EN 12350 series4
EN 12350-4
EN 12350-5
EN 12350-6
EN 12350-7Testing fresh concrete - Part 7: Air content - Pressure methods
EN 12457 series4
EN 12457-1
EN 12457-2Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
EN 12457-3
EN 12457-4Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
EN 12504 series3
EN 12504-1Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
EN 12504-2
EN 12504-4
EN 12814 series3
EN 12814-1
EN 12814-2
EN 12814-4
Other standards2
IEC 61300-2-28
VDA 621
DIN EN 196 -6; DIN EN 196 -7; DIN EN 196 -8; DIN EN 413 -2; DIN EN 445; DIN EN 450 -1; DIN EN 451 -2; DIN EN 459 -2; DIN EN 480 -1; DIN EN 480 -2; DIN EN 480 -5
DIN EN ISO 3451 -1; DIN EN ISO 3451 -5; DIN EN ISO 10304 -1; DIN EN ISO 10523; DIN EN ISO 11885; DIN EN ISO 17294 -2; DIN EN 196 -2; DIN EN 196 -5; DIN EN 196 -10; DIN EN 450 -1
DIN E N 451 -1; DIN EN 459 -2; DIN EN 480 -6; DIN EN 480 -10; DIN EN 480 -12; DIN EN 772 -5; DIN EN 1008; DIN EN 1744 -1
DIN EN ISO 12571; DIN EN ISO 12572; DIN EN 1015 -19; DIN EN 1934; DIN EN 12664; DIN EN 12667; DIN EN 1 2939; DIN EN 538; DIN EN 539 -1; DIN EN 539 -2
DIN EN 12372; DIN EN 13161; DIN EN 13755; DIN EN 932 -1; DIN EN 932 -2; DIN EN 933 -1; DIN EN 933 -4; DIN EN 933 -6; DIN EN 933 -9; DIN EN 933 -10; DIN EN 1097 -2
DIN EN 480 -8; DIN EN 480 -11; DIN EN 480 -14; DIN EN 934 -6; DIN EN 1015 -4; DIN EN 12504 -4; DIN EN 13282 -1; DIN EN 13282 -2; DIN CEN/TR 16632; DIN SPEC 18087; BAW, Merkb latt; DAfStb, Heft 422; DIN 1048
DIN EN 772 -1; DIN EN 772 -3; DIN EN 772 -9; DIN EN 772 -11; DIN EN 772 -13; DIN EN 772 -16; DIN EN 772 -20; DIN EN 772 -21; DIN EN 772 -22; DIN EN 1024; DIN EN 15037 -3; DIN 1053 -3; DIN 4160
DIN EN 15934; DIN EN 27888; DIN 38409 -1; DIN EN ISO 10304 -1; DIN EN ISO 11885; DIN EN ISO 17294 -2; DIN EN 196 -2; DIN EN 772 -5; DIN EN 1744 -1; DIN EN 13137; DIN EN 14582
DIN EN 1744 -1 2013-03; DIN EN 13055 -1 2002-08; DIN EN 13055 -2 2004-09; DIN EN 13055 2016-11; DIN EN 13179 -1 2017-04; DIN 52099 2013-10; DIN 52115 -2 2014-02; Alkali-Richtlinie 2013-10; DIN EN 12390 -3 2019-10
DIN EN 12390 -6; DIN EN 12390 -7; DIN EN 12390 -8; DIN 1048 -5; DIN 66137 -2; QM17V905; DIN EN 772 -4; DIN EN 1925; DIN EN 1926; DIN EN 1936; DIN EN 12371
DIN EN 12457; DIN EN 13137; DIN EN 13279 -2; DIN EN 13346; DIN EN 13639; DIN EN 14629; DIN EN 15934; DIN EN 15936; DIN EN 27888; DIN 19747; DIN 38404 -4
DIN EN 13286 -47; DIN 18121 -2; DIN 18126; DIN 18130 -1; DIN 18137 -3; DIN 18141 -1; DGGT -E1; DGGT -E2; DGGT -E12; TP BF -StB Teil B 8.3
DIN EN 12457-1; DIN EN 12457-2; DIN EN 12457-3; DIN EN 12457-4; DIN EN 13346; DIN 19747; DIN EN ISO 10523
DIN EN 12457 -4; DIN EN 13346; DIN 19747; DIN EN ISO 10523; DIN EN 15934; DIN EN 27888; DIN EN ISO 10304 -1; DIN EN ISO 11885; DIN EN ISO 17294 -2
DIN EN 12390 -7; DIN EN 12504 -1; DIN EN 13529; DIN 19573; DAfStb -Richtlinie BUmwS; QM47V105; DIN EN ISO 12570
DIN EN ISO 12958 -1; DIN EN ISO 12958 -2; DIN EN ISO 12958; DIN EN ISO 13426 -2; DIN EN ISO 25619 -1; DIN EN ISO 25619 -1; DIN EN ISO 25619 -2; DIN EN 14196; DIN EN 16416; ASTM D 5887/D 5887M; ASTM D 5890; ASTM D 5891 / D 5891M; ASTM D 6496 / D 6496M; GDA E 3 -8
DIN EN 15936; DIN 38406 -13; DIN 38406 -14; DIN EN 12457 -1; DIN EN 12457 -2; DIN EN 12457 -3
DIN EN 15936
DVS 2203 -5; DIN EN 12814 -1; DVS 2226 -2; DIN EN 12814 -2; DVS 2226 -3; DIN EN 12814 -4; DIN EN ISO 527 -1; DIN EN ISO 527 -3; DIN EN ISO 1133 -1
DIN EN ISO 1183 -1; DIN EN ISO 9863 -1; DIN EN ISO 9864; DIN EN ISO 12236; BAM Methode B14; DIN EN ISO 9862; DIN EN ISO 10319; DIN EN ISO 10321; DIN EN ISO 12956; DIN EN ISO 1295 7-1
DIN EN 60068 -2-78; VDE 0468-2-78; DIN 50018; DIN 55635; SAE J 2334; VDA 621 -415; VW PV 1210; DIN EN ISO 2409; DIN EN ISO 4628 -1; DIN EN ISO 4628 -2; DIN EN ISO 4628 -3
DIN EN ISO 6892 -1; DIN 50100; EAD 330008 -03 -0601; QM 48V 001
DIN I EC 60068 -2-46; DIN IEC 60068 -2-49; DIN EN 60068 -2-60; VDE 0468-2-60; DIN EN 61300 -2-28; VDI 3958 Blatt 10; DIN EN ISO 6988; DIN EN ISO 9227; DIN EN ISO 11997 -1; DIN ISO 9022 -20; DIN EN 60068 -2-11; DIN EN IEC 60068 -2-11; DIN EN IEC 60068 -2-52; VDE 0468-2-52
DIN EN ISO 10062; DIN EN 60068 -2-42; DIN EN 60068 -2-43
DIN 18134; DIN 18196; DIN 19682-1; DIN 19682-2; DIN EN ISO 17892 -5; DIN EN ISO 17892 -7; DIN EN ISO 17892 -10; DIN ISO 11274; DIN 18122 -2; GDA E 3-12
DIN EN ISO 17892 -1; DIN EN ISO 17892 -2; DIN EN ISO 17892-3; DIN EN ISO 17892 -4; DIN EN ISO 17892 -11; DIN EN ISO 17892 -12; DIN 18121-2; DIN 18125-2; DIN 18127; DIN 18128; DIN 18129; DIN 18132
DIN 38406 -13; DIN 38406 -14; DIN 38409 - 1; DIN -Fachbericht CEN/TR 196-4
DIN EN ISO 4628 -4; DIN EN ISO 4628 -5; DIN EN ISO 4628 -6; DIN EN ISO 4628 -7; DIN EN ISO 4628 -8; DIN EN ISO 4628 -10; DIN EN 60068 -2-1; VDE 0468-2-1; DIN EN 60068 -2-2; VDE 0468-2-2
DIN EN 60068-2-6; DIN EN 60068-2-27; DIN EN 60068-2-53; DIN EN 60068-2-40; DIN EN 60068-2-41; DIN EN 60068-2-64; DIN EN 60068-2-1; DIN EN 60068-2-2; DIN EN 60068-2-14; DIN EN 60068-2-30; DIN EN 60068-2-13; DIN EN 60068-2-39
DIN EN 60068 -2-6; VDE 0468-2-6; DIN EN 60068 -2-13; DIN EN 60068 -2-14; VDE 0468-2-14; DIN EN 60068 -2-27; VDE 0468-2-27; DIN EN 60068 -2-30; DIN EN 60068 -2-39; VDE 0468-2-39; DIN EN 60068 -2-40; DIN EN 60068 -2-41; DIN EN 60068 -2-47; DIN EN 60068 -2-53; VDE 0468-2-53; DIN EN 60068 -2-64; VDE 0468-2-64
Recommendation, Rilem TC 117-FDC 1996-11; Recommendation, Rilem TC 176-IDC 2004-12; ZTV, BMV ZTV-W LB 219 2017; DIN EN 1015 -2 2007-05; DIN EN 1015 -3 2007-05; DIN EN 1015 -6 2007-05; DIN EN 1015 -7 1998-12; DIN EN 1015 -9 2007-05
DIN EN 1015 -10; DIN EN 1015 -11; DIN EN 1015 -12; DIN EN 1015 -18; DIN EN 12350 -4; DIN EN 12350 -5; DIN EN 12350 -6; DIN EN 12350 -7; DIN EN 12504 -1; DIN EN 12504 -2; DIN EN 12390 -3; DIN EN 12390 -5
DIN EN 196 -1; DIN EN 196 -3
DIN EN 1097 -3; DIN EN 1097 -4; DIN EN 1097 -5; DIN EN 1097 -6; DIN EN 1097 -7; DIN EN 1367 -1; DIN EN 1367 -5; DIN EN 1367 -6; DIN EN 1367 -7; DIN EN 1367 -8
EN 12566-1:2000+A1:2003; EN 12566-3:2005+A2:2013; EN 12566-4:2007; EN 12566-6:2013; EN 12566-7:2013
Read from the scope as published by DAKKS. Register refreshed 2026-11-06.
Scope as published by DAKKS
41 lines
ISO/IEC 17025
ActiveD-PL-11143-01-00
ISO/IEC 17025
ActiveD-PL-11143-01-01
ISO/IEC 17025
ActiveD-PL-11143-01-02
ISO/IEC 17025
ActiveD-PL-11143-01-03
Location
Labs with overlapping accredited scope in Germany
- Eurofins Umwelt OstBobritzsch-Hilbersdorf · ~145 kmDAKKSShares 7 accredited methods and materialsEN ISO 9001ISO 10304-1Concrete
- Umwelt- und Agrarlabor GmbH FehrbellinFehrbellin · ~225 kmDAKKSShares 6 accredited methods and materialsEN 13137EN ISO 9001ISO 10304-1
- SGS INSTITUT FRESENIUSTaunusstein · ~236 kmDAKKSShares 6 accredited methods and materialsDIN 19682-2EN ISO 9001Plastics
- Kiwa GmbHRostock · ~348 kmDAKKSShares 6 accredited methods and materialsDIN 19682-2EN 13137EN ISO 9001
- Analytik und Umweltberatung Dr. FischerBad Berka · ~9 kmDAKKSShares 5 accredited methods and materialsDIN 19682-2EN ISO 9001Soil
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.