Italy

Eurocontrol

Zona Industriale Porto Salvo, 89900, Vibo Valentia, Italy

ACCREDIA 01185ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 10
ACCREDIA certificate: 1
Site in our directory: 1

ACCREDIA accredited scope

What this lab is accredited for

Our reading of the ACCREDIA scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 10 standard numbers and the 10 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO 3452-1Non-destructive testing - Penetrant testing - Part 1: General principles

ISO 3452-5Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C

ISO 3452-6Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 degrees C

ISO 10863Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD)

ISO 13588Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology

ISO 16809Non-destructive testing - Ultrasonic thickness determination

ISO 17636-1Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film

ISO 17637Non-destructive testing of welds - Visual testing of fusion-welded joints

ISO 17638Non-destructive testing of welds - Magnetic particle testing

ISO 17640Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment

Read from the scope as published by ACCREDIA. Register refreshed 2026-11-06.

Scope as published by ACCREDIA

2 lines

ACCREDIA

ISO/IEC 17025

Active

01185

View scope

Accredited scope, certificate 01185

Line	Method	Matrix	Range
1	UNI CEI EN ISO/IEC 17025:2018; UNI EN ISO 17638:2016; UNI EN ISO 17640:2019; UNI EN ISO 10863:2020; UNI EN ISO 13588:2019; UNI EN ISO 17637:2017; UNI EN ISO 17636-1:2022; UNI EN ISO 3452-1:2021; UNI EN ISO 3452-5:2009; UNI EN ISO 3452-6:2009; UNI EN ISO 16809:2019	Metal	-
2	UNI CEI EN ISO/IEC 17025:2018; UNI EN ISO 17638:2016; UNI EN ISO 17640:2019; UNI EN ISO 17640:2019 + UNI EN ISO 10863:2020 + UNI EN ISO 13588:2019; UNI EN ISO 17637:2017; UNI EN ISO 17636-1:2022; UNI EN ISO 3452-1:2021; UNI EN ISO 3452-5:2009; UNI EN ISO 3452-6:2009; UNI EN ISO 16809:2019	Metal	-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Zona Industriale Porto Salvo, Vibo Valentia, 89900, IT

38.70791, 16.08506

Open in Maps

← All accredited testing labs in Italy

Labs with overlapping accredited scope in Italy

Accreditation data refreshed from the ACCREDIA register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ACCREDIA entry linked above.