Registers refreshed 2026-11-08.See refresh dates
Poland

Instytut Techniki Górniczej KOMAG

ul. Pszczyńska 37, 44-101, Gliwice, Poland

PCA AB 039PCA AB 665PCA AB 910ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
244
PCA certificates
3
Site in our directory
1
PCA accredited scope

What this lab is accredited for

Our reading of the PCA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 244 standard numbers and the 80 official names we hold. When no standard matches, it searches the method text of every scope line.

EN70
EN 161
EN 420
EN 454
EN 513
EN 607
EN 645
EN 647
EN 716-1
EN 716-2
EN 717-3
EN 747-1
EN 747-2
Show all 70
EN 1149-1
EN 1149-2
EN 1177
EN 1265
EN 1273
EN 1388-1
EN 1388-2
EN 1400
EN 1400-3
EN 1466
EN 1541
EN 1811
EN 1888-1
EN 1888-2
EN 1889-2
EN 1930
EN 12221-1
EN 12221-2
EN 12227
EN 12457-4Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
EN 12586
EN 12790-1
EN 12790-2
EN 12868
EN 12880Characterization of sludges - Determination of dry residue and water content
EN 13130-1
EN 13209-1
EN 13209-2
EN 13210-1
EN 13210-2
EN 13463-1
EN 13688
EN 13954
EN 14036
EN 14253Mechanical vibration - Measurement and evaluation of occupational exposure to whole-body vibration with reference to health - Practical guidance

Certificate says EN 14253+A1:2011. Probably the same standard; not checked against the EN document.

EN 14344
EN 14372
EN 14619
EN 14682
EN 14988
EN 15493
EN 15566
EN 16128
EN 16232
EN 16630Permanently installed outdoor fitness equipment - Safety requirements and test methods
EN 16779-1
EN 16780
EN 16781
EN 16805
EN 16890
EN 17022
EN 17072
EN 17128
EN 17191
EN 17616
EN 50020
EN 50102
EN 50125-3
ISO60
ISO 340Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
ISO 1402Rubber and plastics hoses and hose assemblies - Hydrostatic testing
ISO 2178Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
ISO 2360Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method
ISO 2409Paints and varnishes - Cross-cut test
ISO 2811-1Paints and varnishes - Determination of density - Part 1: Pycnometer method
ISO 3071Textiles - Determination of pH of aqueous extract
ISO 3251Paints, varnishes and plastics - Determination of non-volatile-matter content
ISO 3450Earth-moving machinery - Wheeled or high-speed rubber-tracked machines - Performance requirements and test procedures for brake systems
ISO 3744Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane
ISO 3746Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
ISO 4045Leather - Chemical tests - Determination of pH and difference figure
Show all 60
ISO 4614Plastics - Melamine-formaldehyde mouldings - Determination of extractable formaldehyde
ISO 4628-2Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
ISO 4671Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
ISO 4892-1Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance and requirements
ISO 4892-2Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
ISO 5349-1Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements
ISO 5349-2Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace
ISO 6014Earth-moving machinery - Determination of ground speed
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 7731Ergonomics - Danger signals for public and work areas - Auditory danger signals
ISO 8031Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
ISO 8098Cycles - Safety requirements for bicycles for young children
ISO 8124-1Safety of toys - Part 1: Safety aspects related to mechanical and physical properties
ISO 8297Acoustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method
ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
ISO 9612Acoustics - Determination of occupational noise exposure - Methodology
ISO 9614-1Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points
ISO 9614-2Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning
ISO 10289Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests
ISO 10847Acoustics - In-situ determination of insertion loss of outdoor noise barriers of all types
ISO 11201Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
ISO 11202Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
ISO 11465Sludge and solid environmental matrices - Determination of dry residue or water content and calculation of the dry matter fraction on a mass basis
ISO 11890-2Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method
ISO 13688Protective clothing - General requirements
ISO 14184-1Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde (water extraction method)
ISO 14184-2Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method)
ISO 14362-1Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres
ISO 14362-3Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene
ISO 14695Industrial fans - Method of measurement of fan vibration
ISO 15320Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract
ISO 15630-1Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, rods and wire
ISO 15630-2Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric and lattice girders
ISO 15744Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2)
ISO 16474-1Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance
ISO 16474-2Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
ISO 16809Non-destructive testing - Ultrasonic thickness determination
ISO 17075-1Leather - Chemical determination of chromium(VI) content in leather - Part 1: Colorimetric method
ISO 18527-3Eye and face protection for sports use - Part 3: Requirements and test methods for eyewear intended to be used for surface swimming
ISO 20344Personal protective equipment - Test methods for footwear
ISO 20345Personal protective equipment - Safety footwear
ISO 21920-3Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators
ISO 23553-1Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves
ISO 28927-10Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers
ISO 80079-36Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements
ISO/IEC 80079-38Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines
IEC20
IEC 60034-5
IEC 60204-1Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60529Degrees of protection provided by enclosures (IP Code)
IEC 60598-1Luminaires - Part 1: General requirements and tests
IEC 60745-1
IEC 60745-2-3
IEC 60794-1-21
IEC 60945Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
IEC 61241-4
IEC 61280-4-2
IEC 61340-2-3
IEC 61340-5-1
Show all 20
IEC 61373Railway applications - Rolling stock equipment - Shock and vibration tests
IEC 61439-1
IEC 61851-22
IEC 62115
IEC 62208
IEC 62262
IEC 62271-202
IEC 62271-203
EN 71 series10
EN 71-1
EN 71-2
EN 71-3
EN 71-7
EN 71-8
EN 71-9
EN 71-10
EN 71-11
EN 71-12
EN 71-19
EN 1176 series7
EN 1176-1
EN 1176-2
EN 1176-3
EN 1176-5
EN 1176-6
EN 1176-10
EN 1176-11
EN 1186 series7
EN 1186-1
EN 1186-3Materials and articles in contact with foodstuffs - Plastics - Part 3: Test methods for overall migration in evaporable simulants
EN 1186-5
EN 1186-7
EN 1186-9
EN 1186-14
EN 1186-15
IEC 60079 series7
IEC 60079-0
IEC 60079-1
IEC 60079-2
IEC 60079-7
IEC 60079-11
IEC 60079-15
IEC 60079-18
IEC 62321 series7
IEC 62321-1
IEC 62321-3-1
IEC 62321-4
IEC 62321-5
IEC 62321-6
IEC 62321-7-1
IEC 62321-7-2
IEC 60068 series5
IEC 60068-2-6Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
IEC 60068-2-18
IEC 60068-2-27Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock

Certificate says EN 60068-2-27. Probably the same standard; not checked against the EN document.

IEC 60068-2-64Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance

Certificate says EN 60068-2-64. Probably the same standard; not checked against the EN document.

IEC 60068-2-75
ISO 105 series5
ISO 105-B02Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
ISO 105-B04Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
ISO 105-B06Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
ISO 105-E01Textiles - Tests for colour fastness - Part E01: Colour fastness to water
ISO 105-E04Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration
IEC 60695 series4
IEC 60695-2-10
IEC 60695-2-11
IEC 60695-10-2Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
IEC 60695-11-5
DIN3
DIN 18035-6
DIN 18035-7
DIN 20637
EN 1130 series3
EN 1130
EN 1130-1
EN 1130-2
EN 14350 series3
EN 14350
EN 14350-1
EN 14350-2
EN 1804 series3
EN 1804-1
EN 1804-2
EN 1804-3
EN 1860 series3
EN 1860-1
EN 1860-3
EN 1860-4
Other standards27
ASTM F963
ASTM F1967
PN-B-02156
PN-B-13210
PN-E-04040-03
PN-E-05203
PN-G-02600
PN-G-15000-9
PN-G-15011
PN-G-15024
PN-G-15026
PN-G-15050
Show all 27
PN-G-15533
PN-G-15536
PN-G-32010
PN-G-44001
PN-G-46701
PN-G-46732
PN-G-47050
PN-G-50003
PN-G-50007
PN-G-59010
PN-N-01307:1994Hałas - Dopuszczalne wartości hałasu w środowisku pracy - Wymagania dotyczące wykonywania pomiarów
PN-N-01341
PN-N-01352
PN-N-01357
PN-N-01358

Read from the PCA scope documents we downloaded on 2026-02-11 and 2026-03-13. Register refreshed 2026-11-06.

Scope as published by PCA

35 lines
PCA

ISO/IEC 17025

Active

AB 039

The scope document we hold says it is valid until 2028-05-08.

View on PCA
PCA

ISO/IEC 17025

Active

AB 665

The scope document we hold says it is valid until 2028-05-08.

View on PCA
PCA

ISO/IEC 17025

Active

AB 910

The scope document we hold says it is valid until 2028-05-08.

View on PCA

Location

ul. Pszczyńska 37, Gliwice, 44-101, PL

50.30113, 18.66235

Open in Maps
← All accredited testing labs in Poland

Labs with overlapping accredited scope in Poland

Accreditation data refreshed from the PCA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the PCA entry linked above.