Registers refreshed 2026-11-08.See refresh dates
United States

WireTech

6440 East Canning Street, 90040, Los Angeles, CA, United States

Visit website
A2LA 911.01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
6
A2LA certificate
1
Site in our directory
1
A2LA accredited scope

What this lab is accredited for

Our reading of the A2LA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 6 standard numbers and the 4 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM A370Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM E3Standard Guide for Preparation of Metallographic Specimens
ASTM E18Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM E415Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
ASTM E1077
ASTM F2282

Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.

Scope as published by A2LA

3 lines
A2LA

ISO/IEC 17025

Active

911.01

The scope document we hold says it is valid until 2027-08-31.

View scope

Accredited scope, certificate 911.01

LineMethodMatrixRange
1ASTM E18; ASTM E1077; ASTM F2282; ASTM E3; ASTM E415; ASTM A370; ISO/IEC 17025:2017steel wire-
2--
Show page text

Extracted from the scope document; tables may not line up. View scope for the original.

(A2LA Cert No. 0911.01) 08/11/2025 Page 2 of 2 I. Dimensional Testing (performed at on-site inspection stations) 2: Parameter Range Technique/Method Calipers 3 Up to 4 in Caliper 4” Micrometer 3 Up to 1 in 1” Micrometer 1 When the date, edition, version, etc. is not identified in the scope of accreditation, laboratories may use the version that immediately precedes the current version for a period of one year from the date of publication of the standard measurement method , per part C., Section 1 of A2LA R101 - General Requirements- Accreditation of ISO-IEC 17025 Laboratories. 2 This laboratory does not offer commercial dimensional testing service. 3 This test is not equivalent to that of a calibration.
to 4 in
3

Extracted from the scope document; tables may not line up. View scope for the original.

For the tests to which this accreditation applies, please refer to the laboratory’s Scope of Accreditation. Accredited Laboratory A2LA has accredited WIRETECH, INC. Los Angeles, CA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 11th day of August 2025. _______________________ Mr. Trace McInturff, Vice President, Accreditation Services For the Accreditation Council Certificate Number 0911.01 Valid to August 31, 2027

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

6440 East Canning Street, Los Angeles, CA, 90040, US

34.05369, -118.24277

Open in Maps
← All accredited testing labs in California
← All accredited testing labs in United States

Labs with overlapping accredited scope in United States

Accreditation data refreshed from the A2LA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.