Germany

KIMW Prüf- und Analyse

Karolinenstraße 8, 58507, Lüdenscheid, Germany

DAKKS|D-PL-19634-01-00ISO/IEC 17025Register refreshed 2026-09-25

Certificates

Scope items

Standards

Locations

Free. We check which accredited labs can do it, starting with this one, and reply within two working days with who can do it, how fast, and roughly what it costs.

Only the laboratory you pick gets your contact details. We ask the others without them.

Contact this laboratory

Visit website Open DAKKS register entry

Work at KIMW Prüf- und Analyse?

Claim this profile to keep it accurate.

Register record

DAKKSRefreshed 2026-09-25: D-PL-19634-01-00Active

Accredited standards

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it. Click a standard to see the scope line it comes from, word for word.

ISO

ISO 37Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties

As written on the certificate · Line 5 (DAKKS D-PL-19634-01-00)

DIN EN ISO 527 -1 2019-12; DIN EN ISO 527 -2 2012-06; ISO 37 2017-11; DIN 53504 2017-03

ISO 48-2Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2: Hardness between 10 IRHD and 100 IRHD

As written on the certificate · Line 6 (DAKKS D-PL-19634-01-00)

DIN EN ISO 178; DIN EN ISO 179 -1; DIN 53435; DIN EN ISO 868; DIN 53505; DIN ISO 7619 -1; DIN ISO 48; DIN ISO 48 -2; DIN ISO 48 -4

ISO 48-4Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)

As written on the certificate · Line 6 (DAKKS D-PL-19634-01-00)

DIN EN ISO 178; DIN EN ISO 179 -1; DIN 53435; DIN EN ISO 868; DIN 53505; DIN ISO 7619 -1; DIN ISO 48; DIN ISO 48 -2; DIN ISO 48 -4

ISO 60Plastics - Determination of apparent density of material that can be poured from a specified funnel

As written on the certificate · Line 23 (DAKKS D-PL-19634-01-00)

DIN EN IEC 60695 -2-12; DIN EN IEC 60695 -2-13; DIN EN ISO 4628 -1; DIN EN ISO 4628 -2; DIN EN ISO 4628 -4; DIN EN ISO 1183 -1; DIN EN ISO 60; DIN 53497

ISO 62Plastics - Determination of water absorption

As written on the certificate · Line 24 (DAKKS D-PL-19634-01-00)

DIN EN ISO 6270 -2; DIN EN ISO 62; DIN 53477; DIN SPEC 91446; KIMW 005

ISO 75-1Plastics - Determination of temperature of deflection under load - Part 1: General test method

As written on the certificate · Line 7 (DAKKS D-PL-19634-01-00)

ASTM D 2240; DIN EN ISO 2039 -1; DIN EN ISO 75 -1; DIN EN ISO 75 -2; DIN EN ISO 306

ISO 75-2Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite

As written on the certificate · Line 7 (DAKKS D-PL-19634-01-00)

ASTM D 2240; DIN EN ISO 2039 -1; DIN EN ISO 75 -1; DIN EN ISO 75 -2; DIN EN ISO 306

ISO 178Plastics - Determination of flexural properties

As written on the certificate · Line 6 (DAKKS D-PL-19634-01-00)

DIN EN ISO 178; DIN EN ISO 179 -1; DIN 53435; DIN EN ISO 868; DIN 53505; DIN ISO 7619 -1; DIN ISO 48; DIN ISO 48 -2; DIN ISO 48 -4

ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test

As written on the certificate · Line 6 (DAKKS D-PL-19634-01-00)

DIN EN ISO 178; DIN EN ISO 179 -1; DIN 53435; DIN EN ISO 868; DIN 53505; DIN ISO 7619 -1; DIN ISO 48; DIN ISO 48 -2; DIN ISO 48 -4

ISO 306Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

As written on the certificate · Line 7 (DAKKS D-PL-19634-01-00)

ASTM D 2240; DIN EN ISO 2039 -1; DIN EN ISO 75 -1; DIN EN ISO 75 -2; DIN EN ISO 306

ISO 307Plastics - Polyamides - Determination of viscosity number

As written on the certificate · Line 10 (DAKKS D-PL-19634-01-00)

DIN EN ISO 1133-2; ASTM D 1238; DIN EN ISO 1628-2; DIN EN ISO 307; DIN 53727; DIN 53728-3

ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles

As written on the certificate · Line 5 (DAKKS D-PL-19634-01-00)

DIN EN ISO 527 -1 2019-12; DIN EN ISO 527 -2 2012-06; ISO 37 2017-11; DIN 53504 2017-03

ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics

As written on the certificate · Line 5 (DAKKS D-PL-19634-01-00)

DIN EN ISO 527 -1 2019-12; DIN EN ISO 527 -2 2012-06; ISO 37 2017-11; DIN 53504 2017-03

ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)

As written on the certificate · Line 6 (DAKKS D-PL-19634-01-00)

DIN EN ISO 178; DIN EN ISO 179 -1; DIN 53435; DIN EN ISO 868; DIN 53505; DIN ISO 7619 -1; DIN ISO 48; DIN ISO 48 -2; DIN ISO 48 -4

ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method

As written on the certificate · Line 9 (DAKKS D-PL-19634-01-00)

DIN 55672 -1; DIN EN ISO 13885 -1; VDA 277; VDA 278; PV 3341; FLTM BZ 157 -01; VCS 1027,2749; DIN EN ISO 1133 -1

ISO 1133-2Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture

As written on the certificate · Line 10 (DAKKS D-PL-19634-01-00)

DIN EN ISO 1133-2; ASTM D 1238; DIN EN ISO 1628-2; DIN EN ISO 307; DIN 53727; DIN 53728-3

ISO 1172Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content using calcination methods

As written on the certificate · Line 11 (DAKKS D-PL-19634-01-00)

DIN 75200; ISO 3795; DIN EN ISO 1172; FMVSS 302; BMW N 601 21.0; BMW GS 97038; GME 60261; GMW 3232; PTL 8501; TL 1010; DBL 5307.10 .11 .12; GB 8410; VCS 5031,19

ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method

As written on the certificate · Line 23 (DAKKS D-PL-19634-01-00)

DIN EN IEC 60695 -2-12; DIN EN IEC 60695 -2-13; DIN EN ISO 4628 -1; DIN EN ISO 4628 -2; DIN EN ISO 4628 -4; DIN EN ISO 1183 -1; DIN EN ISO 60; DIN 53497

ISO 1463Metallic and oxide coatings - Measurement of coating thickness - Microscopical method

As written on the certificate · Line 22 (DAKKS D-PL-19634-01-00)

DIN EN ISO 22088 -3; DIN EN ISO 3451 -1; DIN EN ISO 3451 -4; DIN EN ISO 2808; DIN EN ISO 1463; DIN EN 60695 -2-10; DIN EN IEC 60695 -2-11

ISO 1518-1Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method

As written on the certificate · Line 14 (DAKKS D-PL-19634-01-00)

GMW 14093; PV 3905; BMW AA 0136; PV 1503; DBL 5416; DIN EN ISO 1518 -1; DIN EN ISO 20567 -1; ASTM D 3170; DIN EN ISO 22557; DIN 55654; DIN 55656; DIN EN ISO 21546

ISO 1628-2Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins

As written on the certificate · Line 10 (DAKKS D-PL-19634-01-00)

DIN EN ISO 1133-2; ASTM D 1238; DIN EN ISO 1628-2; DIN EN ISO 307; DIN 53727; DIN 53728-3

ISO 2039-1Plastics - Determination of hardness - Part 1: Ball indentation method

As written on the certificate · Line 7 (DAKKS D-PL-19634-01-00)

ASTM D 2240; DIN EN ISO 2039 -1; DIN EN ISO 75 -1; DIN EN ISO 75 -2; DIN EN ISO 306

ISO 2409Paints and varnishes - Cross-cut test

As written on the certificate · Line 21 (DAKKS D-PL-19634-01-00)

BMW GS 97034 – 4 2021-04; BMW GS 97034 – 5 2021-04; BMW GS 97034 - 6-A 2015-09; BMW GS 97034 -6-A; BMW GS 97034-6-C 2021-04; BMW GS 97034 – 8 2021-04; BMW GS 97034 – 9 2021-04; BMW GS 97034 – 10 2021-04; BMW GS 97034 – 12 2022-11; DIN EN ISO 2409 2020-12; GMW 14829 2017-06; KIMW 006 2006-07; BMW AA -0180 2023-05

ISO 2808Paints and varnishes - Determination of film thickness

As written on the certificate · Line 22 (DAKKS D-PL-19634-01-00)

DIN EN ISO 22088 -3; DIN EN ISO 3451 -1; DIN EN ISO 3451 -4; DIN EN ISO 2808; DIN EN ISO 1463; DIN EN 60695 -2-10; DIN EN IEC 60695 -2-11

ISO 2812-3Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium

As written on the certificate · Line 17 (DAKKS D-PL-19634-01-00)

DBL 1302; VW 96183; BMW AA -0635; DBL 5404; VDA 275; PV 3925; DIN EN ISO 2812 -3; DIN EN ISO 2812 -4

ISO 2812-4Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods

As written on the certificate · Line 17 (DAKKS D-PL-19634-01-00)

DBL 1302; VW 96183; BMW AA -0635; DBL 5404; VDA 275; PV 3925; DIN EN ISO 2812 -3; DIN EN ISO 2812 -4

ISO 2813Paints and varnishes - Determination of gloss value at 20°, 60° and 85°

As written on the certificate · Line 16 (DAKKS D-PL-19634-01-00)

DIN EN ISO 2813; DIN 67530; ASTM D 523; GMW 3259; TL 226; TL 211; DBL 7384

ISO 3451-1Plastics - Determination of ash - Part 1: General methods

As written on the certificate · Line 22 (DAKKS D-PL-19634-01-00)

DIN EN ISO 22088 -3; DIN EN ISO 3451 -1; DIN EN ISO 3451 -4; DIN EN ISO 2808; DIN EN ISO 1463; DIN EN 60695 -2-10; DIN EN IEC 60695 -2-11

ISO 3451-4Plastics - Determination of ash - Part 4: Polyamides

As written on the certificate · Line 22 (DAKKS D-PL-19634-01-00)

DIN EN ISO 22088 -3; DIN EN ISO 3451 -1; DIN EN ISO 3451 -4; DIN EN ISO 2808; DIN EN ISO 1463; DIN EN 60695 -2-10; DIN EN IEC 60695 -2-11

ISO 3795Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials

As written on the certificate · Line 11 (DAKKS D-PL-19634-01-00)

DIN 75200; ISO 3795; DIN EN ISO 1172; FMVSS 302; BMW N 601 21.0; BMW GS 97038; GME 60261; GMW 3232; PTL 8501; TL 1010; DBL 5307.10 .11 .12; GB 8410; VCS 5031,19

ISO 4892-2Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps

As written on the certificate · Line 19 (DAKKS D-PL-19634-01-00)

DIN 53236; DIN EN ISO 4892 -2; DIN 75220; PV 1303; PV 1306; PV 3929; PV 3930; MBN 10505; MBN 10506

ISO 6270-2Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir)

As written on the certificate · Line 24 (DAKKS D-PL-19634-01-00)

DIN EN ISO 6270 -2; DIN EN ISO 62; DIN 53477; DIN SPEC 91446; KIMW 005

ISO 6452Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles

As written on the certificate · Line 12 (DAKKS D-PL-19634-01-00)

DIN 75201; ISO 6452; GMW 3235; GME 60326; PV 3015; STD 1082; SAE J 1756; VCS 1027,2719

ISO 7619-1Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)

As written on the certificate · Line 6 (DAKKS D-PL-19634-01-00)

DIN EN ISO 178; DIN EN ISO 179 -1; DIN 53435; DIN EN ISO 868; DIN 53505; DIN ISO 7619 -1; DIN ISO 48; DIN ISO 48 -2; DIN ISO 48 -4

ISO 11358-1Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles

As written on the certificate · Line 8 (DAKKS D-PL-19634-01-00)

DIN EN ISO 11357 -1; DIN EN ISO 11357 -2; DIN EN ISO 11357 -3; DIN EN ISO 11357 -6; KIMW 002; ISO 11358 -1; PV 3927; ISO 11359 -2

ISO 11359-2Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature

As written on the certificate · Line 8 (DAKKS D-PL-19634-01-00)

DIN EN ISO 11357 -1; DIN EN ISO 11357 -2; DIN EN ISO 11357 -3; DIN EN ISO 11357 -6; KIMW 002; ISO 11358 -1; PV 3927; ISO 11359 -2

ISO 13885-1Gel permeation chromatography (GPC) - Part 1: Tetrahydrofuran (THF) as eluent

As written on the certificate · Line 9 (DAKKS D-PL-19634-01-00)

DIN 55672 -1; DIN EN ISO 13885 -1; VDA 277; VDA 278; PV 3341; FLTM BZ 157 -01; VCS 1027,2749; DIN EN ISO 1133 -1

ISO 16750-5Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 5: Chemical loads

As written on the certificate · Line 20 (DAKKS D-PL-19634-01-00)

DIN EN 60068 -2-70; ISO 16750 -5; PV 3906; PV 3952; PV 3987; PV 3974; PV 3964; MBN 10494 -5; PR 556; PR 557; BMW GS 97034 – 1; BMW GS 97034 – 2; BMW GS 97034 – 3

ISO 20567-1Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing

As written on the certificate · Line 14 (DAKKS D-PL-19634-01-00)

GMW 14093; PV 3905; BMW AA 0136; PV 1503; DBL 5416; DIN EN ISO 1518 -1; DIN EN ISO 20567 -1; ASTM D 3170; DIN EN ISO 22557; DIN 55654; DIN 55656; DIN EN ISO 21546

ISO 21546Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)

As written on the certificate · Line 14 (DAKKS D-PL-19634-01-00)

GMW 14093; PV 3905; BMW AA 0136; PV 1503; DBL 5416; DIN EN ISO 1518 -1; DIN EN ISO 20567 -1; ASTM D 3170; DIN EN ISO 22557; DIN 55654; DIN 55656; DIN EN ISO 21546

ISO 22088-3Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 3: Bent strip method

As written on the certificate · Line 22 (DAKKS D-PL-19634-01-00)

DIN EN ISO 22088 -3; DIN EN ISO 3451 -1; DIN EN ISO 3451 -4; DIN EN ISO 2808; DIN EN ISO 1463; DIN EN 60695 -2-10; DIN EN IEC 60695 -2-11

ISO 22557Paints and varnishes - Scratch test using a spring-loaded pen

As written on the certificate · Line 14 (DAKKS D-PL-19634-01-00)

GMW 14093; PV 3905; BMW AA 0136; PV 1503; DBL 5416; DIN EN ISO 1518 -1; DIN EN ISO 20567 -1; ASTM D 3170; DIN EN ISO 22557; DIN 55654; DIN 55656; DIN EN ISO 21546

VDA

VDA 270Name not checked yet

As written on the certificate · Line 13 (DAKKS D-PL-19634-01-00)

PSA D45 1727; VW 50181; VDA 270; GME 60276; GMW 3205; VCS 1027,2729; PV 3900; TPJLR.52.458; PV 1200; PV 2005; PR 303.4; PR 303.5; PR 303.6

VDA 275Name not checked yet

As written on the certificate · Line 17 (DAKKS D-PL-19634-01-00)

DBL 1302; VW 96183; BMW AA -0635; DBL 5404; VDA 275; PV 3925; DIN EN ISO 2812 -3; DIN EN ISO 2812 -4

VDA 277Name not checked yet

As written on the certificate · Line 9 (DAKKS D-PL-19634-01-00)

DIN 55672 -1; DIN EN ISO 13885 -1; VDA 277; VDA 278; PV 3341; FLTM BZ 157 -01; VCS 1027,2749; DIN EN ISO 1133 -1

VDA 278Name not checked yet

As written on the certificate · Line 9 (DAKKS D-PL-19634-01-00)

DIN 55672 -1; DIN EN ISO 13885 -1; VDA 277; VDA 278; PV 3341; FLTM BZ 157 -01; VCS 1027,2749; DIN EN ISO 1133 -1

VDA 280Name not checked yet

As written on the certificate · Line 18 (DAKKS D-PL-19634-01-00)

DIN EN 20105 -A02 1994-10; DIN EN 20105 -A03 1994-10; DIN EN ISO 105 -A03 2020-02; DIN EN ISO 105 -X12 2016-11; DIN EN ISO 105 -B06 2020-12; ISO 105 -X12 2016-06; ISO 7724 -1 1984-10; ISO 7724 -2 1984-10; ISO 7724 -3 1984-10; VDA 75202 2001-08; GME 60292 2000-08; GMW 14162 2016-11; VDA 280 -1 2001-04

VDA 752Name not checked yet

As written on the certificate · Line 18 (DAKKS D-PL-19634-01-00)

ASTM

ASTM D523Standard Test Method for Specular Gloss

As written on the certificate · Line 16 (DAKKS D-PL-19634-01-00)

DIN EN ISO 2813; DIN 67530; ASTM D 523; GMW 3259; TL 226; TL 211; DBL 7384

ASTM D1238Name not checked yet

As written on the certificate · Line 10 (DAKKS D-PL-19634-01-00)

DIN EN ISO 1133-2; ASTM D 1238; DIN EN ISO 1628-2; DIN EN ISO 307; DIN 53727; DIN 53728-3

ASTM D2240Standard Test Method for Rubber Property - Durometer Hardness

As written on the certificate · Line 7 (DAKKS D-PL-19634-01-00)

ASTM D 2240; DIN EN ISO 2039 -1; DIN EN ISO 75 -1; DIN EN ISO 75 -2; DIN EN ISO 306

ASTM D3170Name not checked yet

As written on the certificate · Line 14 (DAKKS D-PL-19634-01-00)

GMW 14093; PV 3905; BMW AA 0136; PV 1503; DBL 5416; DIN EN ISO 1518 -1; DIN EN ISO 20567 -1; ASTM D 3170; DIN EN ISO 22557; DIN 55654; DIN 55656; DIN EN ISO 21546

IEC 60695 series

IEC 60695-2-10Name not checked yet

As written on the certificate · Line 22 (DAKKS D-PL-19634-01-00)

DIN EN ISO 22088 -3; DIN EN ISO 3451 -1; DIN EN ISO 3451 -4; DIN EN ISO 2808; DIN EN ISO 1463; DIN EN 60695 -2-10; DIN EN IEC 60695 -2-11

IEC 60695-2-11Name not checked yet

As written on the certificate · Line 22 (DAKKS D-PL-19634-01-00)

DIN EN ISO 22088 -3; DIN EN ISO 3451 -1; DIN EN ISO 3451 -4; DIN EN ISO 2808; DIN EN ISO 1463; DIN EN 60695 -2-10; DIN EN IEC 60695 -2-11

IEC 60695-2-12Name not checked yet

As written on the certificate · Line 23 (DAKKS D-PL-19634-01-00)

DIN EN IEC 60695 -2-12; DIN EN IEC 60695 -2-13; DIN EN ISO 4628 -1; DIN EN ISO 4628 -2; DIN EN ISO 4628 -4; DIN EN ISO 1183 -1; DIN EN ISO 60; DIN 53497

IEC 60695-2-13Name not checked yet

As written on the certificate · Line 23 (DAKKS D-PL-19634-01-00)

DIN EN IEC 60695 -2-12; DIN EN IEC 60695 -2-13; DIN EN ISO 4628 -1; DIN EN ISO 4628 -2; DIN EN ISO 4628 -4; DIN EN ISO 1183 -1; DIN EN ISO 60; DIN 53497

ISO 11357 series

ISO 11357-1Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles

As written on the certificate · Line 8 (DAKKS D-PL-19634-01-00)

DIN EN ISO 11357 -1; DIN EN ISO 11357 -2; DIN EN ISO 11357 -3; DIN EN ISO 11357 -6; KIMW 002; ISO 11358 -1; PV 3927; ISO 11359 -2

ISO 11357-2Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height

As written on the certificate · Line 8 (DAKKS D-PL-19634-01-00)

DIN EN ISO 11357 -1; DIN EN ISO 11357 -2; DIN EN ISO 11357 -3; DIN EN ISO 11357 -6; KIMW 002; ISO 11358 -1; PV 3927; ISO 11359 -2

ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization

As written on the certificate · Line 8 (DAKKS D-PL-19634-01-00)

DIN EN ISO 11357 -1; DIN EN ISO 11357 -2; DIN EN ISO 11357 -3; DIN EN ISO 11357 -6; KIMW 002; ISO 11358 -1; PV 3927; ISO 11359 -2

ISO 11357-6Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

As written on the certificate · Line 8 (DAKKS D-PL-19634-01-00)

DIN EN ISO 11357 -1; DIN EN ISO 11357 -2; DIN EN ISO 11357 -3; DIN EN ISO 11357 -6; KIMW 002; ISO 11358 -1; PV 3927; ISO 11359 -2

ISO 105 series

ISO 105-A03Textiles - Tests for colour fastness - Part A03: Grey scale for assessing staining

As written on the certificate · Line 18 (DAKKS D-PL-19634-01-00)

ISO 105-B06Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test

As written on the certificate · Line 18 (DAKKS D-PL-19634-01-00)

ISO 105-X12Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing

As written on the certificate · Line 18 (DAKKS D-PL-19634-01-00)

ISO 4628 series

ISO 4628-1Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system

As written on the certificate · Line 23 (DAKKS D-PL-19634-01-00)

DIN EN IEC 60695 -2-12; DIN EN IEC 60695 -2-13; DIN EN ISO 4628 -1; DIN EN ISO 4628 -2; DIN EN ISO 4628 -4; DIN EN ISO 1183 -1; DIN EN ISO 60; DIN 53497

ISO 4628-2Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering

As written on the certificate · Line 23 (DAKKS D-PL-19634-01-00)

DIN EN IEC 60695 -2-12; DIN EN IEC 60695 -2-13; DIN EN ISO 4628 -1; DIN EN ISO 4628 -2; DIN EN ISO 4628 -4; DIN EN ISO 1183 -1; DIN EN ISO 60; DIN 53497

ISO 4628-4Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking

As written on the certificate · Line 23 (DAKKS D-PL-19634-01-00)

DIN EN IEC 60695 -2-12; DIN EN IEC 60695 -2-13; DIN EN ISO 4628 -1; DIN EN ISO 4628 -2; DIN EN ISO 4628 -4; DIN EN ISO 1183 -1; DIN EN ISO 60; DIN 53497

ISO 7724 series

ISO 7724-1Paints and varnishes - Colorimetry - Part 1: Principles

As written on the certificate · Line 18 (DAKKS D-PL-19634-01-00)

ISO 7724-2Paints and varnishes - Colorimetry - Part 2: Colour measurement

As written on the certificate · Line 18 (DAKKS D-PL-19634-01-00)

ISO 7724-3Paints and varnishes - Colorimetry - Part 3: Calculation of colour differences

As written on the certificate · Line 18 (DAKKS D-PL-19634-01-00)

Other standards

DIN 75200Name not checked yet

As written on the certificate · Line 11 (DAKKS D-PL-19634-01-00)

DIN 75200; ISO 3795; DIN EN ISO 1172; FMVSS 302; BMW N 601 21.0; BMW GS 97038; GME 60261; GMW 3232; PTL 8501; TL 1010; DBL 5307.10 .11 .12; GB 8410; VCS 5031,19

EN 20105-A02Name not checked yet

As written on the certificate · Line 18 (DAKKS D-PL-19634-01-00)

EN 20105-A03Name not checked yet

As written on the certificate · Line 18 (DAKKS D-PL-19634-01-00)

IEC 60068-2-70Name not checked yet

As written on the certificate · Line 20 (DAKKS D-PL-19634-01-00)

DIN EN 60068 -2-70; ISO 16750 -5; PV 3906; PV 3952; PV 3987; PV 3974; PV 3964; MBN 10494 -5; PR 556; PR 557; BMW GS 97034 – 1; BMW GS 97034 – 2; BMW GS 97034 – 3