Registers refreshed 2026-11-08.See refresh dates
Germany

Goldschmidt Inspection Germany

Altenhäuser Straße 6, 39126, Magdeburg, Germany

DAKKS D-PL-17234-01-00DAKKS D-PL-17234-01-01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
47
DAKKS certificates
2
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 47 standard numbers and the 35 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO22
ISO 2178Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
ISO 2360Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method
ISO 3452-1Non-destructive testing - Penetrant testing - Part 1: General principles
ISO 4386-1Plain bearings - Metallic multilayer plain bearings - Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm
ISO 5579Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules
ISO 9934-1Non-destructive testing - Magnetic particle testing - Part 1: General principles
ISO 9934-3Non-destructive testing - Magnetic particle testing - Part 3: Equipment
ISO 10893-8Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
ISO 15548-1Non-destructive testing - Equipment for eddy current examination - Part 1: Instrument characteristics and verification
ISO 15549Non-destructive testing - Eddy current testing - General principles
ISO 16809Non-destructive testing - Ultrasonic thickness determination
ISO 16810Non-destructive testing - Ultrasonic testing - General principles
Show all 22
ISO 16811Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
ISO 16826Non-destructive testing - Ultrasonic testing - Testing for discontinuities perpendicular to the surface
ISO 16827Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities
ISO 17636-1Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film
ISO 17637Non-destructive testing of welds - Visual testing of fusion-welded joints
ISO 17638Non-destructive testing of welds - Magnetic particle testing
ISO 17640Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
ISO 17643Non-destructive testing of welds - Eddy current testing of welds by complex-plane analysis
ISO 22232-1Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments
ISO 22825Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
EN16
EN 1369Founding - Magnetic particle testing
EN 1370
EN 1371-1Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings
EN 1371-2Founding - Liquid penetrant testing - Part 2: Investment castings
EN 10160Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method)
EN 10306
EN 10307Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
EN 10308Non-destructive testing - Ultrasonic testing of steel bars
EN 10893-1
EN 10893-2
EN 12681-1
EN 12681-2
EN 13018Non-destructive testing - Visual testing - General principles
EN 15317
EN 16729-1
EN 16729-2
EN 10228 series4
EN 10228-1Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
EN 10228-2Non-destructive testing of steel forgings - Part 2: Penetrant testing
EN 10228-3Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings
EN 10228-4Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
EN 12680 series3
EN 12680-1Founding - Ultrasonic testing - Part 1: Steel castings for general purposes
EN 12680-2
EN 12680-3Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings
Other standards2
DIN 22261
DIN 54141-3

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

9 lines
DAKKS

ISO/IEC 17025

Active

D-PL-17234-01-00

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-17234-01-01

View scope

Location

Altenhäuser Straße 6, Magdeburg, 39126, DE

52.17610, 11.66262

Open in Maps
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.