Evonik Operations GmbH Werkstofftechnik
Paul-Baumann-Straße 1, 45772, Marl, Germany
- Accredited standards
- 48
- DAKKS certificates
- 3
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 48 standard numbers and the 45 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO29
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 2178Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
ISO 2746Vitreous and porcelain enamels - High voltage test
ISO 3651-1Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
ISO 3651-2Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid
ISO 4136Destructive tests on welds in metallic materials - Transverse tensile test
ISO 4386-1Plain bearings - Metallic multilayer plain bearings - Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm
ISO 5173Destructive tests on welds in metallic materials - Bend tests
ISO 5579Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
Show all 29
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 7438Metallic materials - Bend test
ISO 9015-1Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints
ISO 9016Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
ISO 10893-4Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
ISO 10893-5Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
ISO 13588Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
ISO 16809Non-destructive testing - Ultrasonic thickness determination
ISO 16811Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
ISO 17636-1Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film
ISO 17637Non-destructive testing of welds - Visual testing of fusion-welded joints
ISO 17638Non-destructive testing of welds - Magnetic particle testing
ISO 17639Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
ISO 17640Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
ISO 20485Non-destructive testing - Leak testing - Tracer gas method
ISO 20769-1Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection
ISO 22825Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
EN12
EN 1369Founding - Magnetic particle testing
EN 1371-1Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings
EN 1371-2Founding - Liquid penetrant testing - Part 2: Investment castings
EN 1593
EN 10160Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method)
EN 10307Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
EN 10308Non-destructive testing - Ultrasonic testing of steel bars
EN 12680-1Founding - Ultrasonic testing - Part 1: Steel castings for general purposes
EN 12680-3Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings
EN 12681-1
EN 13018Non-destructive testing - Visual testing - General principles
EN 13184
EN 10228 series4
EN 10228-1Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
EN 10228-2Non-destructive testing of steel forgings - Part 2: Penetrant testing
EN 10228-3Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings
EN 10228-4Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
ISO 3452 series3
ISO 3452-1Non-destructive testing - Penetrant testing - Part 1: General principles
ISO 3452-5Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C
ISO 3452-6Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 degrees C
DIN EN ISO 6892 -1; DIN EN ISO 4136; DIN EN ISO 6506 -1; DIN EN ISO 6507 -1; DIN EN ISO 9015 -1; DIN EN ISO 7438; DIN EN ISO 5173; DIN EN ISO 148 -1; DIN EN ISO 9016; DIN EN ISO 868
DIN EN ISO 3651 -1; DIN EN ISO 3651 -2; PA 08.67 / 5; DIN EN ISO 17639; AD 2000 -Merkblatt HP 2/1; PA 08.53 / 8; DIN EN ISO 2178; DIN EN ISO 2746; PA 08.48 / 11; PA 08.39 / 6; PA 08.32 / 4
DIN EN 10228 -3; DIN EN 10228 -4; DIN EN ISO 16811; DIN EN 10307; DIN EN 10308; DIN EN 12680 -1; DIN EN 12680 -3; DIN EN ISO 22825; DIN EN ISO 13588; DIN ISO 4386 -1; PA 08.71
DIN EN ISO 17636 -1; DIN EN ISO 20769 -1; DIN EN ISO 5579; DIN EN 12681 -1; DIN EN ISO 16809; DIN EN ISO 17640; DIN EN 10160; SEP 1916; SEP 1919; SEP 1920
DIN EN 1369; DIN EN ISO 17638; DIN EN 10228-1; DIN EN ISO 10893-5; DIN EN 1371-1; DIN EN 1371-2; DIN EN ISO 3452-1; DIN EN 10228-2; DIN EN ISO 10893-4; DIN EN ISO 3452-5; DIN EN ISO 3452-6
DIN EN ISO 17637; DIN EN 13018; DIN EN ISO 20485; DIN EN 1593; DIN EN 13184; AD 2000 -Merkblatt HP 5/3
Read from the scope as published by DAKKS. Register refreshed 2026-11-06.
Scope as published by DAKKS
11 lines
ISO/IEC 17025
ActiveD-PL-21594-02-00
ISO/IEC 17025
ActiveD-PL-21594-02-01
ISO/IEC 17025
ActiveD-PL-21594-02-02
Location
Labs with overlapping accredited scope in Germany
- WOITT Inspection Service GmbH & Co. KGSulingen · ~161 kmDAKKSShares 5 accredited methods and materialsEN ISO 17637EN ISO 17640EN ISO 9001
- Schmitt NDTFrankenthal · ~252 kmDAKKSShares 5 accredited methods and materialsEN ISO 17637EN ISO 17640ISO 3452-1
- JR-WP Ausbildung und DienstleistungsMagdeburg · ~316 kmDAKKSShares 5 accredited methods and materialsEN ISO 17637EN ISO 17640EN ISO 6892-1
- TÜV Rheinland Industrie Service GmbH Prüflaboratorium für MaterialprüfungHalle/Saale · ~341 kmDAKKSShares 5 accredited methods and materialsEN ISO 17640EN ISO 9001DIN
- Zentrallabor GmbH Leipzig Institut für WerkstoffprüfungenLeipzig · ~362 kmDAKKSShares 5 accredited methods and materialsEN ISO 17637EN ISO 17640EN ISO 6892-1
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.