FindTestingLabs
Registers refreshed 2026-09-25.See refresh dates
Germany

Minz Prüf + Test

Rübsangerstraße 52, 65551, Limburg an der Lahn, Germany

DAKKS|D-PL-18566-01-00DAKKS|D-PL-18566-01-01DAKKS|D-PL-18566-01-02ISO/IEC 17025Register refreshed 2026-09-25
Certificates
3
Scope items
14
Standards
31
Locations
1

Free. We check which accredited labs can do it, starting with this one, and reply within two working days with who can do it, how fast, and roughly what it costs.

Only the laboratory you pick gets your contact details. We ask the others without them.

Follow this lab

We will email you if this laboratory’s accreditation status or scope changes. No newsletter, only changes.

Work at Minz Prüf + Test?

Claim this profile to keep it accurate.

Register record

DAKKSRefreshed
D-PL-18566-01-00Active
D-PL-18566-01-01Active
D-PL-18566-01-02Active

Accredited standards

31

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it. Click a standard to see the scope line it comes from, word for word.

ISO

ISO 34-1Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
As written on the certificate · Line 4 (DAKKS D-PL-18566-01-00)

DIN 53539; ISO 6133 2017-04; ISO 34 -1 2022-06; ISO 34 -2 2022-06; ISO 36 2020-03

ISO 34-2Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 2: Small (Delft) test pieces
As written on the certificate · Line 4 (DAKKS D-PL-18566-01-00)

DIN 53539; ISO 6133 2017-04; ISO 34 -1 2022-06; ISO 34 -2 2022-06; ISO 36 2020-03

ISO 36Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics
As written on the certificate · Line 4 (DAKKS D-PL-18566-01-00)

DIN 53539; ISO 6133 2017-04; ISO 34 -1 2022-06; ISO 34 -2 2022-06; ISO 36 2020-03

ISO 48Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
As written on the certificate · Line 6 (DAKKS D-PL-18566-01-00)

DIN EN ISO 868 2003-10; DIN 53505; ISO 868 2003-10; ISO 868 2003-03; ISO 48 2016-09

ISO 178Plastics - Determination of flexural properties
As written on the certificate · Line 3 (DAKKS D-PL-18566-01-00)

DIN EN ISO 178 2019-08; DIN EN ISO 527 -1 2019-12; DIN EN ISO 527 -2 2012-06; DIN 53504; DIN 53507

ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
As written on the certificate · Line 5 (DAKKS D-PL-18566-01-00)

DIN EN ISO 179 -1 2023-10; DIN EN ISO 180 2023-09; DIN 53519; ISO 179 -1 2023-10; ISO 180 2023-09

ISO 180Plastics - Determination of Izod impact strength
As written on the certificate · Line 5 (DAKKS D-PL-18566-01-00)

DIN EN ISO 179 -1 2023-10; DIN EN ISO 180 2023-09; DIN 53519; ISO 179 -1 2023-10; ISO 180 2023-09

ISO 188Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
As written on the certificate · Line 10 (DAKKS D-PL-18566-01-00)

DIN 53508; DIN 53521; ISO 1431 -1 2017-04; ISO 1817 2016-11; ISO 188 2023-03

ISO 247-1Rubber - Determination of ash - Part 1: Combustion method
As written on the certificate · Line 8 (DAKKS D-PL-18566-01-00)

ISO 4649 2021-06; ISO 247 -1 2018-07; ISO 1172 2023-08; ISO 2781 2018-06; ISO 4649 2024-08

ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
As written on the certificate · Line 3 (DAKKS D-PL-18566-01-00)

DIN EN ISO 178 2019-08; DIN EN ISO 527 -1 2019-12; DIN EN ISO 527 -2 2012-06; DIN 53504; DIN 53507

ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
As written on the certificate · Line 3 (DAKKS D-PL-18566-01-00)

DIN EN ISO 178 2019-08; DIN EN ISO 527 -1 2019-12; DIN EN ISO 527 -2 2012-06; DIN 53504; DIN 53507

ISO 815-1Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures
As written on the certificate · Line 9 (DAKKS D-PL-18566-01-00)

ISO 815 -1 2022-04; ISO 815 -2 2022-04; ISO 2285 2022-11; ISO 815 -1 2019-11; ISO 815 -2 2019-11

ISO 815-2Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures
As written on the certificate · Line 9 (DAKKS D-PL-18566-01-00)

ISO 815 -1 2022-04; ISO 815 -2 2022-04; ISO 2285 2022-11; ISO 815 -1 2019-11; ISO 815 -2 2019-11

ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
As written on the certificate · Line 6 (DAKKS D-PL-18566-01-00)

DIN EN ISO 868 2003-10; DIN 53505; ISO 868 2003-10; ISO 868 2003-03; ISO 48 2016-09

ISO 1172Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content using calcination methods
As written on the certificate · Line 7 (DAKKS D-PL-18566-01-00)

DIN EN ISO 1172 1998-12; DIN EN ISO 1183 -1 2019-09; DIN EN ISO 3451 -1 2019-05; DIN 53479; DIN 53512

As written on the certificate · Line 8 (DAKKS D-PL-18566-01-00)

ISO 4649 2021-06; ISO 247 -1 2018-07; ISO 1172 2023-08; ISO 2781 2018-06; ISO 4649 2024-08

ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
As written on the certificate · Line 7 (DAKKS D-PL-18566-01-00)

DIN EN ISO 1172 1998-12; DIN EN ISO 1183 -1 2019-09; DIN EN ISO 3451 -1 2019-05; DIN 53479; DIN 53512

ISO 1431-1Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing
As written on the certificate · Line 10 (DAKKS D-PL-18566-01-00)

DIN 53508; DIN 53521; ISO 1431 -1 2017-04; ISO 1817 2016-11; ISO 188 2023-03

As written on the certificate · Line 11 (DAKKS D-PL-18566-01-00)

ISO 1431 -1 2024-07; ISO 1817 2024-03; ISO 6072 2011-12

ISO 1817Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
As written on the certificate · Line 10 (DAKKS D-PL-18566-01-00)

DIN 53508; DIN 53521; ISO 1431 -1 2017-04; ISO 1817 2016-11; ISO 188 2023-03

As written on the certificate · Line 11 (DAKKS D-PL-18566-01-00)

ISO 1431 -1 2024-07; ISO 1817 2024-03; ISO 6072 2011-12

ISO 2285Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
As written on the certificate · Line 9 (DAKKS D-PL-18566-01-00)

ISO 815 -1 2022-04; ISO 815 -2 2022-04; ISO 2285 2022-11; ISO 815 -1 2019-11; ISO 815 -2 2019-11

ISO 2781Rubber, vulcanized or thermoplastic - Determination of density
As written on the certificate · Line 8 (DAKKS D-PL-18566-01-00)

ISO 4649 2021-06; ISO 247 -1 2018-07; ISO 1172 2023-08; ISO 2781 2018-06; ISO 4649 2024-08

ISO 3451-1Plastics - Determination of ash - Part 1: General methods
As written on the certificate · Line 7 (DAKKS D-PL-18566-01-00)

DIN EN ISO 1172 1998-12; DIN EN ISO 1183 -1 2019-09; DIN EN ISO 3451 -1 2019-05; DIN 53479; DIN 53512

ISO 4649Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
As written on the certificate · Line 8 (DAKKS D-PL-18566-01-00)

ISO 4649 2021-06; ISO 247 -1 2018-07; ISO 1172 2023-08; ISO 2781 2018-06; ISO 4649 2024-08

ISO 6072Rubber - Compatibility between hydraulic fluids and standard elastomeric materials
As written on the certificate · Line 11 (DAKKS D-PL-18566-01-00)

ISO 1431 -1 2024-07; ISO 1817 2024-03; ISO 6072 2011-12

ISO 6133Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
As written on the certificate · Line 4 (DAKKS D-PL-18566-01-00)

DIN 53539; ISO 6133 2017-04; ISO 34 -1 2022-06; ISO 34 -2 2022-06; ISO 36 2020-03

ISO 9924-2Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 2: Acrylonitrile-butadiene and halobutyl rubbers
As written on the certificate · Line 13 (DAKKS D-PL-18566-01-00)

ISO 9924 -2 2016-08; ISO 9924 -3 2024-02; ISO 11357 -1 2023-02; ISO 11357 -2 2020-03; ISO 11357 -3 2018-03

ISO 9924-3Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers
As written on the certificate · Line 13 (DAKKS D-PL-18566-01-00)

ISO 9924 -2 2016-08; ISO 9924 -3 2024-02; ISO 11357 -1 2023-02; ISO 11357 -2 2020-03; ISO 11357 -3 2018-03

ISO 11357 series

ISO 11357-1Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
As written on the certificate · Line 12 (DAKKS D-PL-18566-01-00)

DIN EN ISO 11357 -1 2023-06; DIN EN ISO 11357 -2 2020-08; DIN EN ISO 11357 -3 2018-07; DIN EN ISO 11357 -4 2021-05; DIN EN ISO 11357 -5 2014-07

As written on the certificate · Line 13 (DAKKS D-PL-18566-01-00)

ISO 9924 -2 2016-08; ISO 9924 -3 2024-02; ISO 11357 -1 2023-02; ISO 11357 -2 2020-03; ISO 11357 -3 2018-03

ISO 11357-2Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height
As written on the certificate · Line 12 (DAKKS D-PL-18566-01-00)

DIN EN ISO 11357 -1 2023-06; DIN EN ISO 11357 -2 2020-08; DIN EN ISO 11357 -3 2018-07; DIN EN ISO 11357 -4 2021-05; DIN EN ISO 11357 -5 2014-07

As written on the certificate · Line 13 (DAKKS D-PL-18566-01-00)

ISO 9924 -2 2016-08; ISO 9924 -3 2024-02; ISO 11357 -1 2023-02; ISO 11357 -2 2020-03; ISO 11357 -3 2018-03

ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
As written on the certificate · Line 12 (DAKKS D-PL-18566-01-00)

DIN EN ISO 11357 -1 2023-06; DIN EN ISO 11357 -2 2020-08; DIN EN ISO 11357 -3 2018-07; DIN EN ISO 11357 -4 2021-05; DIN EN ISO 11357 -5 2014-07

As written on the certificate · Line 13 (DAKKS D-PL-18566-01-00)

ISO 9924 -2 2016-08; ISO 9924 -3 2024-02; ISO 11357 -1 2023-02; ISO 11357 -2 2020-03; ISO 11357 -3 2018-03

ISO 11357-4Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
As written on the certificate · Line 12 (DAKKS D-PL-18566-01-00)

DIN EN ISO 11357 -1 2023-06; DIN EN ISO 11357 -2 2020-08; DIN EN ISO 11357 -3 2018-07; DIN EN ISO 11357 -4 2021-05; DIN EN ISO 11357 -5 2014-07

ISO 11357-5Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
As written on the certificate · Line 12 (DAKKS D-PL-18566-01-00)

DIN EN ISO 11357 -1 2023-06; DIN EN ISO 11357 -2 2020-08; DIN EN ISO 11357 -3 2018-07; DIN EN ISO 11357 -4 2021-05; DIN EN ISO 11357 -5 2014-07

Scope as published by DAKKS

14 lines
DAKKS

ISO/IEC 17025

Active

D-PL-18566-01-00

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-18566-01-01

View on DAKKS
DAKKS

ISO/IEC 17025

Active

D-PL-18566-01-02

View on DAKKS

Location

Rübsangerstraße 52, Limburg an der Lahn, 65551, DE

50.38155, 8.12002

Open in Maps
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.