Envalior Engineering Materials
2267 West Mill Road, 47720, Evansville, IN, United States
Visit website- Accredited standards
- 20
- A2LA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 20 standard numbers and the 15 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO15
ISO 75-1Plastics - Determination of temperature of deflection under load - Part 1: General test method
ISO 75-2Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite
ISO 178Plastics - Determination of flexural properties
ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
ISO 180Plastics - Determination of Izod impact strength
ISO 291Plastics - Standard atmospheres for conditioning and testing
ISO 307Plastics - Polyamides - Determination of viscosity number
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 1133Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 3451-1Plastics - Determination of ash - Part 1: General methods
ISO 3451-4Plastics - Determination of ash - Part 4: Polyamides
ISO 3795Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials
ISO 11357-1Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ASTM5
ASTM D257
ASTM D618
ASTM D1238
ASTM D3418
ASTM D6980
ISO/IEC 17025:2017; ISO 180/A; ASTM D257; ASTM D618; ISO 291; ISO 527; ISO 75-1; ISO 75-2; ISO 178; ISO 1183-1; ASTM D1238A; ISO 1133; ASTM D3418; ISO 11357-1; ISO 11357-3; ISO 3451-1; ISO 3451-4; ASTM D6980; ISO 179-1; ISO 307; FMVSS 302; UL 94V; ISO 3795
Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.
Scope as published by A2LA
2 lines
ISO/IEC 17025
Active673.01
The scope document we hold says it is valid until 2027-07-31.
Accredited scope, certificate 673.01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ISO/IEC 17025:2017; ISO 180/A; ASTM D257; ASTM D618; ISO 291; ISO 527; ISO 75-1; ISO 75-2; ISO 178; ISO 1183-1; ASTM D1238A; ISO 1133; ASTM D3418; ISO 11357-1; ISO 11357-3; ISO 3451-1; ISO 3451-4; ASTM D6980; ISO 179-1; ISO 307; FMVSS 302; UL 94V; ISO 3795 | plastics and polymers | - |
| 2 | Extracted from the scope document; tables may not line up. View scope for the original. For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation.
Accredited Laboratory
A2LA has accredited
ENVALIOR ENGINEERING MATERIALS INC.
Evansville, IN
for technical competence in the field of
Mechanical Testing
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates
technical competence for a defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
Presented this 2nd day of July 2025.
_______________________
Mr. Trace McInturff, Vice President, Accreditation Services
For the Accreditation Council
Certificate Number 0673.01
Valid to July 31, 2027 | ||
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in United States
- John J Farber Technology and Innovation CenterRichmond, IN · ~311 kmA2LAShares 1 accredited test methodASTM D618
- ICC Evaluation ServiceElkhart, IN · ~439 kmA2LAShares 1 accredited test methodASTM D618
- CTL EngineeringColumbus, OH · ~453 kmA2LAShares 1 accredited test methodASTM D618
- Element Materials Technology Chicago - Mt. ProspectMount Prospect, IL · ~457 kmA2LAShares 1 accredited test methodASTM D618
- Specialty Testing ServicesLeeds, AL · ~501 kmA2LAShares 1 accredited test methodASTM D618
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.