Paragon Systems Testing
Concord, Canada
Visit website- Accredited standards
- 38
- A2LA certificate
- 1
- Sites in our directory
- 2
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 38 standard numbers and the 18 official names we hold. When no standard matches, it searches the method text of every scope line.
ASTM17
ASTM B557
ASTM D618
ASTM D638Standard Test Method for Tensile Properties of Plastics
ASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D1599
ASTM D2122
ASTM D2290
ASTM D2412
ASTM D2990
ASTM D3039
ASTM D3567
ASTM D4541
Show all 17
ASTM D5813
ASTM E8Standard Test Methods for Tension Testing of Metallic Materials
ASTM E646
ASTM F2019
ASTM G97
ISO10
ISO 178Plastics - Determination of flexural properties
ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 3126Plastics piping systems - Plastics components - Determination of dimensions
ISO 6259-1Thermoplastics pipes - Determination of tensile properties - Part 1: General test method
ISO 6259-3Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 7685Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial ring stiffness
ISO 10275Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent
ISO 11296-4Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes
ISO 20653Road vehicles - Degrees of protection (IP code) - Protection of electrical equipment against foreign objects, water and access
IEC 60068 series4
IEC 60068-2-6Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
IEC 60068-2-18
IEC 60068-2-27Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 60068-2-64Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
Other standards7
DIN 75220
EN 10002-1
ETSI EN 303 403
GMW3172
IEC 60529Degrees of protection provided by enclosures (IP Code)
IEC 61373Railway applications - Rolling stock equipment - Shock and vibration tests
SAE J575
GMW3172; IEC 60529; SAE J575; JIS D 0207; IEC 60068-2-18; ISO 20653; MIL-STD-202G; ETSI EN 303-403 V 2.1.2; ASTM G97; DIN 75220; MIL-STD-810; ASTM E8/E8M; A370; DIN EN 10002-1; ISO 6892; JIS Z2241; ASTM E646; ISO 10275; JIS Z2253; ASTM B557
ISO 178; ISO 11296-4; ISO 527-2; ASTM D638; ASTM D790; ASTM D1599; F2019 Appendix X2; ISO 6259-1; ISO 6259-3; ASTM D3039; ASTM D2290; ASTM D2990; ASTM D618; ASTM D4541; ASTM D2412; ASTM D2122; ASTM D3567; ASTM D5813; ISO 7685; ISO 11296-4 Annex B; ISO 3126; GMW3172; MIL-STD-202G Method 106G; MIL-STD-810G Method 503.5; MIL-STD-810H Method 503.7; EIA/ECA-364-28E; GMW3431; IEC 68-2-6 Test Fc; IEC 60068-2-64 Test Fh; IEC 61373
ASTM D790; ISO 178; ISO 11296-4; ASTM F2019 Appendix X2; ISO 527-2; ASTM D638; ISO 6259-1; ISO 6259-3; ASTM D3039; ASTM D2412; ASTM D2290; ASTM D2122 (Section 6 & 7); ASTM D3567 (Section 6 & 7); ASTM D5813 (Section 8.1.2); ISO 7685 at 5.3; ISO 11296-4 Annex B; ISO 3126 (Section 5.2)
ASTM D790; ISO 178, 11296-4
JIS D 1601; MIL-STD-167-1A; MIL-STD-202G Method 201A, 204D, 214A; MIL-STD-810G Method 514.6, 528; MIL-STD-810H Method 514.8, 528; RTCA/DO-160E Section 8 - Vibration; SAE J575; CFR CH. I Section 178.608; ETSI EN 303-403 V 2.1.2, Section 7.5; EIA-364-27B; GMW3431; IEC 60068-2-27 Test Ea and Guidance: Shock; IEC 61373; MIL-STD-202G Method 213B; MIL-STD-810G Method 516.6 (Classical Pulse); MIL-STD-810H Method 516.8 (Classical Pulse); RTCA/DO-160E Section 7 – Operational Shock and Crash Safety; GMW3172; GMW14011, GMW7293; Ford CETP: 15.01-L-402; Chrysler PF-8243; GMW3431
Read from the A2LA scope document we downloaded on 2026-08-05. Register refreshed 2026-11-06.
Scope as published by A2LA
7 lines
ISO/IEC 17025
Active1942.01
The scope document we hold says it is valid until 2028-04-30.
Accredited scope, certificate 1942.01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | GMW3172; IEC 60529; SAE J575; JIS D 0207; IEC 60068-2-18; ISO 20653; MIL-STD-202G; ETSI EN 303-403 V 2.1.2; ASTM G97; DIN 75220; MIL-STD-810; ASTM E8/E8M; A370; DIN EN 10002-1; ISO 6892; JIS Z2241; ASTM E646; ISO 10275; JIS Z2253; ASTM B557 | materials, components, and assemblies | - |
| 2 | ISO 178; ISO 11296-4; ISO 527-2; ASTM D638; ASTM D790; ASTM D1599; F2019 Appendix X2; ISO 6259-1; ISO 6259-3; ASTM D3039; ASTM D2290; ASTM D2990; ASTM D618; ASTM D4541; ASTM D2412; ASTM D2122; ASTM D3567; ASTM D5813; ISO 7685; ISO 11296-4 Annex B; ISO 3126; GMW3172; MIL-STD-202G Method 106G; MIL-STD-810G Method 503.5; MIL-STD-810H Method 503.7; EIA/ECA-364-28E; GMW3431; IEC 68-2-6 Test Fc; IEC 60068-2-64 Test Fh; IEC 61373 | CIPP Materials; Plastic Pipe and Tubing; Plastics; Adhesive Bonds; Coatings; Thermoplastic Pipe and Fittings; "Fiber Glass" Glass-Fiber Reinforced Thermosetting Resin Pipe and Fittings; Cured-in-Place Thermosetting Resin Sewer Piping System; Glass-Reinforced Thermosetting Plastics (GRP) pipes; Plastics Piping Systems – Plastics Components | - |
| 3 | JIS D 1601; MIL-STD-167-1A; MIL-STD-202G Method 201A, 204D, 214A; MIL-STD-810G Method 514.6, 528; MIL-STD-810H Method 514.8, 528; RTCA/DO-160E Section 8 - Vibration; SAE J575; CFR CH. I Section 178.608; ETSI EN 303-403 V 2.1.2, Section 7.5; EIA-364-27B; GMW3431; IEC 60068-2-27 Test Ea and Guidance: Shock; IEC 61373; MIL-STD-202G Method 213B; MIL-STD-810G Method 516.6 (Classical Pulse); MIL-STD-810H Method 516.8 (Classical Pulse); RTCA/DO-160E Section 7 – Operational Shock and Crash Safety; GMW3172; GMW14011, GMW7293; Ford CETP: 15.01-L-402; Chrysler PF-8243; GMW3431 | Automobile Parts; Shipboard Equipment; Switches; Railway Applications; Rolling Stock Equipment | 3 to 3000 Hz |
| 4 | MIL-STD-202G Method 303A; FMVSS 206 Hinge push/pull test; WI-044 | - | - |
| 5 | ASTM D790; ISO 178, 11296-4 | CIPP Materials | - |
| 6 | ASTM D790; ISO 178; ISO 11296-4; ASTM F2019 Appendix X2; ISO 527-2; ASTM D638; ISO 6259-1; ISO 6259-3; ASTM D3039; ASTM D2412; ASTM D2290; ASTM D2122 (Section 6 & 7); ASTM D3567 (Section 6 & 7); ASTM D5813 (Section 8.1.2); ISO 7685 at 5.3; ISO 11296-4 Annex B; ISO 3126 (Section 5.2) | CIPP Materials; Thermoplastic Pipe and Fittings; Fiber Glass Glass-Fiber Reinforced Thermosetting Resin Pipe and Fittings; Cured-in-Place Thermosetting Resin Sewer Piping System; Glass-Reinforced Thermosetting Plastics (GRP) pipes; Plastics Piping Systems – Plastics Components | - |
| 7 | ISO/IEC 17025:2017 | - | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Other Locations
1 other site in this organization
Labs with overlapping accredited scope in Canada
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.