Akzo Nobel Como PTC
Via Silvio Pellico 8, 22100, Como, Italy
Visit website- Accredited standards
- 16
- ACCREDIA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the ACCREDIA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 16 standard numbers and the 11 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO7
ISO 1519Paints and varnishes - Bend test (cylindrical mandrel)Exclusion
Limits written next to it
ISO 1519:2011 - escluso/except 4.1.2,
ISO 2409Paints and varnishes - Cross-cut test
ISO 2813Paints and varnishes - Determination of gloss value at 20°, 60° and 85°Exclusion
Limits written next to it
ISO 2813:2016 - escluso/except
ISO 6270-2Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir)
ISO 9227Corrosion tests in artificial atmospheres - Salt spray testsExclusion
Limits written next to it
ISO 9227:2022 - escluso/except Cap.
ISO 9227:2022 - escluso/except cap
ISO 15184Paints and varnishes - Determination of film hardness by pencil test
ISO 16474-2Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
ASTM6
ASTM D522
ASTM D523Standard Test Method for Specular Gloss
ASTM D2244
ASTM D3359
ASTM D7091
ASTM E1331
ISO 4628 series3
ISO 4628-2Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
ISO 4628-3Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
ISO 4628-8Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect
ISO 9227:2022; ISO 4628-3:2024; UNI EN ISO 4628-2:2016; UNI EN ISO 4628-8:2013; ASTM D3359-23; ISO 1519:2011; ASTM D522/D522M-17; ISO 2813:2014; UNI EN ISO 16474-2:2023; UNI EN ISO 2813:2016; ISO 6270-2:2025; ISO 2409:2020
ASTM D523-25; ASTM D2244-25; ASTM E1331-15(2023); ISO 15184:2020; ASTM D7091-22; SAE J2334:2016; ISO 2409:2020
Read from the scope as published by ACCREDIA. Register refreshed 2026-11-06.
Scope as published by ACCREDIA
2 lines
ISO/IEC 17025
Active01184
Accredited scope, certificate 01184
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ISO 9227:2022; ISO 4628-3:2024; UNI EN ISO 4628-2:2016; UNI EN ISO 4628-8:2013; ASTM D3359-23; ISO 1519:2011; ASTM D522/D522M-17; ISO 2813:2014; UNI EN ISO 16474-2:2023; UNI EN ISO 2813:2016; ISO 6270-2:2025; ISO 2409:2020 | Materiali metallici e loro rivestimenti (organici ed inorganici)/Metallic materials and organic and inorganic coatings; Pitture e vernici su substrato metallico/Paints and varnishes on metallic substrate; Pitture e vernici su substrato/Paints and varnishes on substrate; Pitture/Paints; Vernici/Varnishes | - |
| 2 | ASTM D523-25; ASTM D2244-25; ASTM E1331-15(2023); ISO 15184:2020; ASTM D7091-22; SAE J2334:2016; ISO 2409:2020 | - | 25 to 500 µm |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Accreditation data refreshed from the ACCREDIA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ACCREDIA entry linked above.