KES Machine

(A2LA Cert. No. 4163.01) 05/05/2025 Page 2 of 2 Parameter/Equipment Range CMC2, 4 (±) Comments Rotation Accuracy3 – Mills, Lathes, Machining Centers, Rotary Tables, CMM 360° 5.8 µrad Rotary calibrator Volumetric Performance3 – Machine Tools, CNC, CMM Unlimited5 Linear: (0.5M) µm Angular: (0.004A + 0.5 + 0.11M)) µrad Straightness: (0.01A + 1.5) µm Roll: (0.01A + 6.3 µrad) µm Laser interferometer Volumetric Performance3 – Machine Tools, CNC, CMM (50 to 600) mm (0.7 + 0.003M) µm Ball bar calibrator Circular Interpolation3 – Machine Tools, CNC, CMM (50 to 600) mm (0.7 + 0.003M) µm Ball bar calibrator ___________________________________________ 1 This laboratory offers commercial dimensional testing, calibration service, and field calibration service. 2 Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation when performing more or less routine calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. CMCs represent expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage factor of k = 2. The actual measurement uncertainty of a specific calibration performed by the laboratory may be greater than the CMC due to the behavior of the customer’s device and to influences from the circumstances of the specific calibration. 3 Field calibration service is available for this calibration. Please note the actual measurement uncertainties achievable on a customer's site can normally be expected to be larger than the CMC found on the A2LA Scope. Allowance must be made for aspects such as the environment at the place of calibration and for other possible adverse effects such as those caused by transportation of the calibration equipment. The usual allowance for the actual uncertainty introduced by the item being calibrated, (e.g., resolution) must also be considered and this, on its own, could result in the actual measurement uncertainty achievable on a customer’s site being larger than the CMC. 4 In the statement of CMC, A is the displayed flatness reading in µrad, and M is the nominal length of the diagonal measured in meters. 5 Unlimited measurement range is possible with software stitching. 6 This scope meets A2LA’s P112 Flexible Scope Policy.