Xiamen Niell Electronics Co.,
No. 29 Middle Pingcheng Road, Haicang District, Xiamen, Fujian Province, 361022, People's Republic of China, Xiamen, Fujian Province, China
Visit website- Accredited standards
- 1
- A2LA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 1 standard number and the 1 official name we hold. When no standard matches, it searches the method text of every scope line.
ISO 16063-21Methods for the calibration of vibration and shock transducers - Part 21: Vibration calibration by comparison to a reference transducer
ISO 16063-21; JJG-233; GB/T 20485.21; JJF 1352; JJF 1305; JJG 860; JJG 229
Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.
Scope as published by A2LA
4 lines
ISO/IEC 17025
Active4339.01
The scope document we hold says it is valid until 2027-09-30.
Accredited scope, certificate 4339.01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | - | -Show page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 4339.01) 09/02/2025 Page 1 of 3
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017
XIAMEN NIELL ELECTRONICS CO., LTD
厦门乃尔电子有限公司
No. 29 Pingcheng Middle Road
Haicang District
Xiamen, Fujian Province 361022
PEOPLE’S REPUBLIC OF CHINA
Fiona Yang Phone: +86 592 3774920
CALIBRATION
Valid To: September 30, 2027 Certificate Number: 4339.01
In recognition of the successful completion of the A2LA evaluation process (including an assessment of
the organization’s compliance with R205 – A2LA’s Calibration Program Requirements), accreditation is
granted to this laboratory to perform the following calibrations
1, 6:
I. Dimensional
Parameter/Equipment
Range
CMC2, 3 (±)
Comments
Angular Displacement
Up to ± 50°
0.29 %
JJF 1352 encoder
Linear Displacement (1D)
Up to ± 100 mm
0.19 %
JJF 1305 linear moving
stage
II. Electrical – DC/Low Frequency
Parameter/Frequency
Range
CMC2, 3, 5 (±)
Comments
DC Voltage – Measure
Up to 10 V
0.06 mV
DMM
AC Voltage – Measure
(1000 to 3000) Hz
Up to 10 V
0.05 %
DMM | to 50 ° |
| 2 | ISO 16063-21; JJG-233; GB/T 20485.21; JJF 1352; JJF 1305; JJG 860; JJG 229 | - | 1000 to 3000 Hz |
| 3 | JJG 229 | - | -30 to 150 ℃ |
| 4 | Extracted from the scope document; tables may not line up. View scope for the original. For the calibrations to which this accreditation applies, please refer to the laboratory’s Calibration Scope of Accreditation.
Accredited Laboratory
A2LA has accredited
XIAMEN NIELL ELECTRONICS CO., LTD
Xiamen, Fujian Province, PEOPLE’S REPUBLIC OF CHINA
for technical competence in the field of
Calibration
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories . This laboratory also meets R205 – Specific
Requirements: Calibration Laboratory Accreditation Program. This accreditation demonstrates technical competence for a
defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
Presented this 2nd day of September 2025.
_______________________
Mr. Trace McInturff, Vice President, Accreditation Services
For the Accreditation Council
Certificate Number 4339.01
Valid to September 30, 2027 | ||
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.