Registers refreshed 2026-11-08.See refresh dates
Germany

MBQ Qualitätssicherungs-GmbH

Mittelstraße 14 a, 06333, Hettstedt-Walbeck, Germany

Visit website
DAKKS D-PL-19143-01-00ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
43
DAKKS certificate
1
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 43 standard numbers and the 33 official names we hold. When no standard matches, it searches the method text of every scope line.

EN14
EN 1369Founding - Magnetic particle testing
EN 1370
EN 1371-1Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings
EN 1371-2Founding - Liquid penetrant testing - Part 2: Investment castings
EN 1435
EN 10160Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method)
EN 10306
EN 10307Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
EN 10308Non-destructive testing - Ultrasonic testing of steel bars
EN 12681-1
EN 13018Non-destructive testing - Visual testing - General principles
EN 14127
EN 16407-1
EN 16407-2
ISO11
ISO 4386-1Plain bearings - Metallic multilayer plain bearings - Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm
ISO 5579Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules
ISO 9934-1Non-destructive testing - Magnetic particle testing - Part 1: General principles
ISO 16810Non-destructive testing - Ultrasonic testing - General principles
ISO 16823Non-destructive testing - Ultrasonic testing - Through-transmission technique
ISO 16826Non-destructive testing - Ultrasonic testing - Testing for discontinuities perpendicular to the surface
ISO 17636-1Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film
ISO 17636-2Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors
ISO 17637Non-destructive testing of welds - Visual testing of fusion-welded joints
ISO 17638Non-destructive testing of welds - Magnetic particle testing
ISO 17640Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
EN 10228 series4
EN 10228-1Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
EN 10228-2Non-destructive testing of steel forgings - Part 2: Penetrant testing
EN 10228-3Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings
EN 10228-4Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
EN 12680 series3
EN 12680-1Founding - Ultrasonic testing - Part 1: Steel castings for general purposes
EN 12680-2
EN 12680-3Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings
ISO 10893 series3
ISO 10893-4Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
ISO 10893-5Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
ISO 10893-6Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
ISO 3452 series3
ISO 3452-1Non-destructive testing - Penetrant testing - Part 1: General principles
ISO 3452-5Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C
ISO 3452-6Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 degrees C
ISO 8501 series3
ISO 8501-1Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ISO 8501-2Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
ISO 8501-3Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections
Other standards2
DIN 27201-7
DIN 54123

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

7 lines
DAKKS

ISO/IEC 17025

Active

D-PL-19143-01-00

View scope

Accredited scope, certificate D-PL-19143-01-00

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018; DIN EN ISO 9001Metal-
2DIN EN 1435; DIN EN 12681-1; DIN EN 16407-1; DIN EN 16407-2; DIN EN ISO 5579; DIN EN ISO 10893-6; DIN EN ISO 17636-1; DIN EN ISO 17636-2; DIN 54123; DIN EN 10160Metal-
3DIN EN 10228-3; DIN EN 10228-4; DIN EN 10306; DIN EN 10307; DIN EN 10308; DIN EN 12680-1; DIN EN 12680-2; DIN EN 12680-3; DIN EN 14127; DIN ISO 4386-1; DIN EN ISO 16810; DIN EN ISO 16823Metal0.5 to mm
4DIN EN ISO 16826; DIN EN ISO 17640; SEL 072; SEP 1915; SEP 1917; SEP 1918; SEP 1919; SEP 1920; SEP 1921; SEP 1922; SEP 1923; SEP 1924Stahlrohren; Grobblech; Halbzeug; Schmiedestücken; Stabstahl; Gussstücken; GusseisenSee scope document
5DIN EN 1369; DIN EN 10228-1; DIN EN ISO 9934-1; DIN EN ISO 10893-5; DIN EN ISO 17638; SEP 1935; DIN EN 1371-1; DIN EN 1371-2; DIN EN 10228-2; DIN EN ISO 3452-1; DIN EN ISO 3452-5; DIN EN ISO 3452-6Gussstücken aus Stahl; Schmiedestücken aus Stahl; Stahlrohren; Schweißverbindungen; Sand-, Schwerkraftkokillen- und Niederdruckkokillengussstücke; Feingussstücke-
6DIN EN ISO 10893-4; SEP 1936; DIN EN 1370; DIN EN 13018; DIN EN ISO 8501-1; DIN EN ISO 8501-2; DIN EN ISO 8501-3; DIN EN ISO 17637nahtloser und geschweißter Stahlrohre; Gussstücken aus Stahl; Stahloberflächen; Schweißverbindungen-
7DIN 27201-7; AD 2000-Merkblatt HP 5/3 Anlage 1; SEP 1914; SEP 1916; DVGW GW 350Metal-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Mittelstraße 14 a, Hettstedt-Walbeck, 06333, DE

51.65592, 11.48358

Open in Maps
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.