Registers refreshed 2026-11-08.See refresh dates
Germany

Schweißtechnische Lehranstalt Magdeburg, Gemeinnützige Gesellschaft mit beschränkter Haftung Werkstoffprüflabor

An der Sülze 7, 39179, Barleben, Germany

DAKKS D-PL-11304-01-00DAKKS D-PL-11304-01-01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
28
DAKKS certificates
2
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 28 standard numbers and the 22 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO22
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 643Steels - Micrographic determination of the apparent grain size
ISO 945-1Microstructure of cast irons - Part 1: Graphite classification by visual analysis
ISO 2639Steels - Determination and verification of the depth of carburized and hardened cases
ISO 4136Destructive tests on welds in metallic materials - Transverse tensile test
ISO 4967Steel - Determination of the non-metallic inclusion content - Micrographic method
ISO 5173Destructive tests on welds in metallic materials - Bend tests
ISO 5178Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
Show all 22
ISO 6892-2Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature
ISO 7438Metallic materials - Bend test
ISO 8491Metallic materials - Tube (in full section) - Bend test
ISO 8492Metallic materials - Tube - Flattening test
ISO 8496Metallic materials - Tube - Ring tensile test
ISO 9015-1Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints
ISO 9016Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
ISO 9017Destructive tests on welds in metallic materials - Fracture test
ISO 16859-1Metallic materials - Leeb hardness test - Part 1: Test method
ISO 17639Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
EN4
EN 10164
EN 10247
EN 10328
EN 12797
Other standards2
DIN 50106
DIN 50190-3

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

8 lines
DAKKS

ISO/IEC 17025

Active

D-PL-11304-01-00

View scope

Accredited scope, certificate D-PL-11304-01-00

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018--
2DIN EN ISO 6892 -1 2017 -02; DIN EN ISO 6892 -2 2018 -09; DIN EN ISO 5178 2019 -05; DIN EN ISO 8496 2014 -03; DIN EN ISO 8492 2014 -03metallische Werkstoffe; Schweißverbindungen; Stahlerzeugnisse-
3DIN EN ISO 9017 2018 -04; DIN EN ISO 9016 2013 -02; DIN EN ISO 148 -1 2017 -05; DIN EN ISO 9015 -1 2011 -05; DIN EN ISO 6506 -1 2015 -02Metal-
4DIN EN ISO 643 2013 -05; DIN EN ISO 945 -1 2019 -10; DIN EN ISO 17639 2013 -12; DIN EN 12797 2000 -12; DIN EN 10247 2017 -09 Metallographische Prüfung des Gehaltes nichtmetallischer Einschlüsse in Stählen mit Bildreihen ISO 4967 2013 -07Metal-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

DAKKS

ISO/IEC 17025

Active

D-PL-11304-01-01

View scope

Accredited scope, certificate D-PL-11304-01-01

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018--
2DIN EN ISO 6892-1; DIN EN ISO 6892-2; DIN EN ISO 5178; DIN EN ISO 4136; DIN EN ISO 8496; DIN EN ISO 8492; DIN EN ISO 8491; DIN EN 10164; DIN EN ISO 5173metallischen Werkstoffen und Schweißverbindungen-
3DIN EN ISO 7438; SEP 1390; DIN EN ISO 9017; DIN 50106; DIN EN ISO 9016; DIN EN ISO 148 -1; DIN EN ISO 9015 -1; DIN EN ISO 6506 -1; DIN EN ISO 6507 -1; DIN EN ISO 6508 -1; DIN EN ISO 16859 -1; DIN EN ISO 2639Metallische Werkstoffe; Schweißverbindungen an metallischen Werkstoffen; Stahl-
4DIN EN 10328; DIN 50190 -3; DIN EN 12797; DIN EN ISO 643; DIN EN ISO 945 -1; ISO 4967; DIN EN ISO 17639; VA 01Eisen und Stahl; Stahl; Gusseisen; metallische Werkstoffe; Stahl- und Eisenwerkstoffe sowie Nicht-Eisenmetall-Werkstoffe-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

An der Sülze 7, Barleben, 39179, DE

52.19374, 11.60222

Open in Maps
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.