Registers refreshed 2026-11-08.See refresh dates
Netherlands

Tata Steel IJmuiden

Wenckebachstraat 1, 1951 JZ, IJMUIDEN, Netherlands

RvA L150RvA L595ISO/IEC 17025Register refreshed 2026-11-08

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
53
RvA certificates
2
Site in our directory
1
RvA accredited scope

What this lab is accredited for

Our reading of the RvA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 53 standard numbers and the 41 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO29
ISO 377Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
ISO 501Hard coal - Determination of the crucible swelling number
ISO 556Coke (greater than 20 mm in size) - Determination of mechanical strength
ISO 562Hard coal and coke - Determination of volatile matter
ISO 589Hard coal - Determination of total moisture
ISO 1928Coal and coke - Determination of gross calorific value
ISO 2597-1Iron ores - Determination of total iron content - Part 1: Titrimetric method after tin(II) chloride reduction
ISO 3082Iron ores - Sampling and sample preparation procedures
ISO 5664Water quality - Determination of ammonium - Distillation and titration method
ISO 6878Water quality - Determination of phosphorus - Ammonium molybdate spectrometric method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 7888Water quality - Determination of electrical conductivity
Show all 29
ISO 7935Stationary source emissions - Determination of the mass concentration of sulfur dioxide in flue gases - Performance characteristics of automated measuring systems
ISO 9035Iron ores - Determination of acid-soluble iron(II) content - Titrimetric method
ISO 9096Stationary source emissions - Manual determination of mass concentration of particulate matter
ISO 10523Water quality - Determination of pH
ISO 10780Stationary source emissions - Measurement of velocity and volume flowrate of gas streams in ducts
ISO 11731Water quality - Enumeration of Legionella

Certificate says EN ISO 11731 2019-03 UBA Empfehlung 18. Probably the same standard; not checked against the EN document.

ISO 12039Stationary source emissions - Determination of the mass concentration of carbon monoxide, carbon dioxide and oxygen in flue gas - Performance characteristics of automated measuring systems
ISO 13909-4Coal and coke - Mechanical sampling - Part 4: Preparation of test samples of coal
ISO 14284Steel and iron - Sampling and preparation of samples for the determination of chemical composition
ISO 15587-1Water quality - Digestion for the determination of selected elements in water - Part 1: Aqua regia digestion
ISO 15713Stationary source emissions - Sampling and determination of gaseous fluoride content
ISO 16911-1Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method
ISO 17294-2Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes
ISO 19458Water quality - Sampling for microbiological analysis
ISO 21877Stationary source emissions— Determination of the mass concentration of ammonia - Manual method
ISO 23873Hard coal - Method for the measurement of the swelling properties using a dilatometer
ISO 29541Coal and coke - Determination of total carbon, hydrogen and nitrogen - Instrumental method
EN13
EN 872Water quality - Determination of suspended solids - Method by filtration through glass fibre filters
EN 1483Water quality - Determination of mercury - Method using atomic absorption spectrometry
EN 1911-1
EN 13211Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
EN 13284-1Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
EN 14181Stationary source emissions - Quality assurance of automated measuring systems
EN 14385Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V
EN 14789Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
EN 14790Stationary source emissions - Determination of the water vapour in ducts - Standard reference method
EN 14791Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
EN 14792Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: Chemiluminescence
EN 15058Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry
EN 15259Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report
NEN11
NEN 2826
NEN 5104
NEN 5706
NEN 5742
NEN 5743
NEN 5744
NEN 5766
NEN 6476
NEN 6633
NEN 6953
NEN 6966

Read from the RvA scope documents we downloaded on 2026-02-12 and 2026-10-04. Register refreshed 2026-11-08.

Scope as published by RvA

11 lines
RvA

ISO/IEC 17025

Active

L150

The scope document we hold says it is valid until 2027-08-01.

View scope
RvA

ISO/IEC 17025

Active

L595

The scope document we hold says it is valid until 2030-10-01.

View scope

Location

Wenckebachstraat 1, IJMUIDEN, 1951 JZ, NL

52.45742, 4.61120

Open in Maps
← All accredited testing labs in Netherlands

Labs with overlapping accredited scope in Netherlands

Accreditation data refreshed from the RvA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the RvA entry linked above.