Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung eingetragener Verein Fraunhofer-Institut für Großstrukturen in der Produktionstechnik IGP
Albert-Einstein-Straße 30, 18059, Rostock, Germany
- Accredited standards
- 70
- DAKKS certificates
- 2
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 70 standard numbers and the 54 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO48
ISO 75-2Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 306Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
ISO 604Plastics - Determination of compressive properties
ISO 844Rigid cellular plastics - Determination of compressive properties
ISO 898-1Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread
ISO 1172Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content using calcination methods
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 2178Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
ISO 2808Paints and varnishes - Determination of film thickness
ISO 4136Destructive tests on welds in metallic materials - Transverse tensile test
ISO 4288Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture
Show all 48
ISO 4624Paints and varnishes - Pull-off test for adhesion
ISO 5173Destructive tests on welds in metallic materials - Bend tests
ISO 6270-1Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure)
ISO 6270-2Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir)
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6721-5Plastics - Determination of dynamic mechanical properties - Part 5: Flexural vibration - Non-resonance method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 6892-3Metallic materials - Tensile testing - Part 3: Method of test at low temperature
ISO 7438Metallic materials - Bend test
ISO 9015-1Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints
ISO 9015-2Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints
ISO 9016Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
ISO 9664Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear
ISO 11003-1Adhesives - Determination of shear behaviour of structural adhesives - Part 1: Torsion test method using butt-bonded hollow cylinders
ISO 11339Adhesives - T-peel test for flexible-to-flexible bonded assemblies
ISO 11357-2Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height
ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 11997-1Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid
ISO 11997-2Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humid/UV light
ISO 12135Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
ISO 12944-6Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods
ISO 12944-9Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures
ISO 13003Fibre-reinforced plastics - Determination of fatigue properties under cyclic loading conditions
ISO 14125Fibre-reinforced plastic composites - Determination of flexural properties
ISO 14126Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction
ISO 14129Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method
ISO 14130Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method
ISO 14556Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method
ISO 14589Blind rivets - Mechanical testing
ISO 14916Thermal spraying - Determination of tensile adhesive strength
ISO 15653Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
ISO 16047Fasteners - Torque/clamp force testing
ISO 16474-3Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
ISO 17639Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
ISO 21194Elastic adhesives - Testing of adhesively bonded joints - Bead peel test
ASTM8
ASTM C271
ASTM C273
ASTM C297
ASTM C365
ASTM C393
ASTM D3528
ASTM D7078
ASTM E1019Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Combustion and Inert Gas Fusion Techniques
EN7
EN 1090-2
EN 1465
EN 2564
EN 6033
EN 14869-1
EN 14869-2
EN 15870
ISO 527 series5
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 527-3Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
ISO 527-4Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 527-5Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
Other standards2
DIN 50100
VDA 621
DIN EN ISO 527-1; DIN EN ISO 527-2; DIN EN ISO 527-3; DIN EN ISO 527-4; DIN EN ISO 527-5; DIN EN ISO 306; DIN EN ISO 75-2
ASTM C 297/C 297M; ASTM C 393/C 393M; DIN EN ISO 6892 -1; DIN EN ISO 6892 -3; DIN EN ISO 7438; DIN EN ISO 6507 -1; DIN EN ISO 148 -1; DIN EN ISO 14556; DIN 50100; ISO 12135; DIN EN ISO 9015 -1; DIN EN ISO 9015 -2; DIN EN ISO 4136
ISO 6721-5; DIN EN ISO 604; DIN EN ISO 844; DIN EN ISO 14125; DIN EN ISO 14126; DIN EN ISO 14129; DIN EN ISO 14130; ASD -STAN prEN 6060; DIN EN 6033; ASTM D 7078/D 7078M; ISO 13003; ASTM C 273/C 273M; ASTM C 365/C 365M
DIN EN ISO 5173; DIN EN ISO 15653; DIN EN ISO 17639; DIN EN ISO 9016; DIN EN 1090 -2; DIN EN ISO 14589; DIN EN ISO 16047; DIN EN ISO 898 -1; DIN 969; ECCS No. 124
DIN EN ISO 12944 -9; DIN EN ISO 6270 -1; DIN EN ISO 6270 -2; DIN EN ISO 16474 -3; DIN EN ISO 11997 -1; DIN EN ISO 11997 -2; DIN EN ISO 4624; DIN EN ISO 14916; ASTM E 1019; DIN EN ISO 1172; DIN EN 2564
DIN EN ISO 1183 -1; ASTMC 271/C 271M; DIN EN ISO 11357 -2; DIN EN ISO 11357 -3; DIN EN ISO 2178; DIN EN ISO 2808; DIN EN ISO 4288
DIN EN 1465; DIN EN 14869 -1; DIN EN 14869 -2; ASTM D 3528; DIN EN ISO 9664; DIN EN 15870; DIN EN ISO 11339; DIN ISO 21194; ISO 11003 -1; VDA 621 -415; DIN EN ISO 9227; DIN EN ISO 12944 -6
Read from the scope as published by DAKKS. Register refreshed 2026-11-06.
Scope as published by DAKKS
10 lines
ISO/IEC 17025
ActiveD-PL-11140-01-00
ISO/IEC 17025
ActiveD-PL-11140-01-01
Location
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.