Registers refreshed 2026-11-08.See refresh dates
Germany

Geotechnik Dr. Heer GmbH & Co KG

Bühler Straße 111 a, 66130, Saarbrücken, Germany

DAKKS D-PL-19911-01-00DAKKS D-PL-19911-01-01DAKKS D-PL-19911-01-02ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
21
DAKKS certificates
3
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 21 standard numbers and the 5 official names we hold. When no standard matches, it searches the method text of every scope line.

DIN13
DIN 18121-2
DIN 18125-2
DIN 18127
DIN 18128
DIN 18129
DIN 18132
DIN 18134
DIN 18196
DIN 19682-1
DIN 19682-2
DIN 19698-1
DIN 19698-5
DIN 19698-6
ISO 17892 series5
ISO 17892-1Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content
ISO 17892-3Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density
ISO 17892-4Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO 17892-11Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests
ISO 17892-12Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits
Other standards3
19698-2
ISO/IEC 17982-2
LAGA PN 98

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

6 lines
DAKKS

ISO/IEC 17025

Active

D-PL-19911-01-00

View scope

Accredited scope, certificate D-PL-19911-01-00

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

DAKKS

ISO/IEC 17025

Active

D-PL-19911-01-01

View scope

Accredited scope, certificate D-PL-19911-01-01

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018; DIN EN ISO 9001mineralischer Baustoffe-
2DIN EN ISO 17892 -1; DIN EN ISO 17982 -2; DIN EN ISO 17892 -3; DIN EN ISO 17892 -4; DIN EN ISO 17892 -11; DIN EN ISO 17892 -12; DIN 18121 -2; DIN 18125 -2Soil-
3DIN 18127; DIN 18128; DIN 18129; DIN 18132; DIN 18134; DIN 18196; DIN 19682 -1; DIN 19682 -2; GDA E 3 -12Baugrund, Untersuchung von Bodenproben; Bodenbeschaffenheit-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

DAKKS

ISO/IEC 17025

Active

D-PL-19911-01-02

View scope

Accredited scope, certificate D-PL-19911-01-02

LineMethodMatrixRange
1-Waste
Show page text

Extracted from the scope document; tables may not line up. View scope for the original.

Diese Urkundenanlage gilt nur zusammen mit der schriftlich erteilten Urkunde und gibt den Stand zum Zeitpunkt des Ausstellungsdatums wieder. Der jeweils aktuelle Stand der gültigen und überwachten Akkreditierung ist der Datenbank akkreditierter Stellen der Deutschen Akkreditierungsstelle zu entnehmen (www.dakks.de) Verwendete Abkürzungen: siehe letzte Seite Seite 1 von 2 Deutsche Akkreditierungsstelle Anlage zur Teil-Akkreditierungsurkunde D-PL-19911-01-02 nach DIN EN ISO/IEC 17025:2018 Gültig ab: 18.03.2024 Ausstellungsdatum: 18.03.2024 Diese Urkundenanlage ist Bestandteil der Akkreditierungsurkunde D-PL-19911-01-00. Inhaber der Teil-Akkreditierungsurkunde: Geotechnik Dr. Heer GmbH & Co. KG Bühler Straße 111a, 66130 Saarbrücken mit dem Standort Geotechnik Dr. Heer GmbH & Co. KG Bühler Straße 111a, 66130 Saarbrücken Das Prüflaboratorium erfüllt die Anforderungen gemäß DIN EN ISO/IEC 17025:2018, um die in dieser Anlage aufgeführten Konformitätsbewertungstätigkeiten durchzuführen. Das Prüflaboratorium erfüllt gegebenenfalls zusätzliche gesetzliche und normative Anforderungen, einschließlich solcher in relevanten sektoralen Programmen, sofern diese nachfolgend ausdrücklich bestätigt werden. Die Anforderungen an das Managementsystem in der DIN EN ISO/IEC 17025 sind in einer für Prüflaboratorien relevanten Sprache verfasst und stehen insgesamt in Übereinstimmung mit den Prinzipien der DIN EN ISO 9001. Prüfungen in den Bereichen: Untersuchung von Abfällen nach Deponieverordnung Anhang 4 (Juli 2020); Untersuchungen nach Ersatzbaustoffverordnung (August 2023)
-
2DepV; LAGA PN 98; DIN 19698 -1; DIN 19698-2; DIN 19698-5; DIN 19698-6; DIN 19698 -1:2014 -05Waste-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Bühler Straße 111 a, Saarbrücken, 66130, DE

49.20237, 7.03381

Open in Maps
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.