Italy

CMF S.P.A. - Laboratorio Prove

Via Vino della Pace, 32/D, 34071, Cormons, Italy

ACCREDIA 01141ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 15
ACCREDIA certificate: 1
Site in our directory: 1

ACCREDIA accredited scope

What this lab is accredited for

Our reading of the ACCREDIA scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 15 standard numbers and the 15 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM10

ASTM A370Standard Test Methods and Definitions for Mechanical Testing of Steel Products

ASTM A923Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels

ASTM E3Standard Guide for Preparation of Metallographic Specimens

ASTM E8Standard Test Methods for Tension Testing of Metallic Materials

ASTM E10Standard Test Method for Brinell Hardness of Metallic Materials

ASTM E23Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

ASTM E45Standard Test Methods for Determining the Inclusion Content of SteelExclusion

Limits written next to it

ASTM E45-25 - escluso/except §

Exclusion. Written next to it on line 1 of ACCREDIA certificate 01141.

ASTM E112Standard Test Methods for Determining Average Grain SizeSome clausesExclusion

Limits written next to it

ASTM E112-24 - escluso/except §11 e

Some clauses. Written next to it on line 1 of ACCREDIA certificate 01141.

ASTM E112-24 - escluso/except §11 e

Exclusion. Written next to it on line 1 of ACCREDIA certificate 01141.

ASTM E407Standard Practice for Microetching Metals and Alloys

ASTM E562Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count

ISO5

ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method

ISO 643Steels - Micrographic determination of the apparent grain size

ISO 4967Steel - Determination of the non-metallic inclusion content - Micrographic method

ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method

ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature

Read from the scope as published by ACCREDIA. Register refreshed 2026-11-06.

Scope as published by ACCREDIA

1 line

ACCREDIA

ISO/IEC 17025

Active

01141

View scope

Accredited scope, certificate 01141

Line	Method	Matrix	Range
1	UNI CEI EN ISO/IEC 17025:2018; ASTM A923-23 Met A; ASTM A923-23 Met B; UNI EN ISO 643:2024; ISO 4967:2013; UNI 3244:1980; ASTM E45-25; ASTM E562-19e1; UNI 3137:1965; ASTM E112-24; UNI EN ISO 6506-1:2015; ASTM E10-23; ASTM A370-24a; ASTM E3-11(2025) + ASTM E407-23; UNI EN ISO 148-1:2016; ASTM E23-25; UNI EN ISO 6892-1:2020; ASTM E8/E8M-25	Metal	5 to 450 J

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Via Vino della Pace, 32/D, Cormons, 34071, IT

45.95085, 13.46873

Open in Maps

← All accredited testing labs in Italy

Labs with overlapping accredited scope in Italy

Accreditation data refreshed from the ACCREDIA register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ACCREDIA entry linked above.