Germany

Göttfert Werkstoff - Prüfmaschinen

Siemensstraße 2, 74722, Buchen Odenwald, Germany

DAKKS D-PL-17291-01-00ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 19
DAKKS certificate: 1
Site in our directory: 1

DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 19 standard numbers and the 8 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM7

ASTM D1238

ASTM D1646

ASTM D3835

ASTM D5289

ASTM D5930

ASTM D6204

ASTM D6601

ISO5

ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method

ISO 1133-2Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture

ISO 6502-1Rubber - Measurement of vulcanization characteristics using curemeters - Part 1: Introduction

ISO 11443Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers

ISO 17744Plastics - Determination of specific volume as a function of temperature and pressure, pvT diagram - Piston apparatus method

DIN4

DIN 53523-3

DIN 53523-4

DIN 53529-2

DIN 53529-3

ISO 289 series3

ISO 289-1Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 1: Determination of Mooney viscosity

ISO 289-2Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 2: Determination of pre-vulcanization characteristics

ISO 289-3Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

5 lines

DAKKS

ISO/IEC 17025

Active

D-PL-17291-01-00

View scope

Accredited scope, certificate D-PL-17291-01-00

Line	Method	Matrix	Range
1	DIN EN ISO/IEC 17025:2018	-	-
2	ASTM D3835 -16; ASTM D6204 -19a; ASTM D6601 -19; ISO 11443; ASTM D1238 -13; ASTM D1646 -19a; DIN 53523 -3	plastics; elastomers	-
3	DIN EN ISO 1133-1; DIN EN ISO 1133-2; DIN 53523-4; ISO 289-1; ISO 289-2; ISO 289-3; PD ISO/TS 289-4; GFT014; ASTM D3835-16; ASTM D5289-19a; DIN 53529-2	thermoplastics; Rubber and Elastomers; Rubber, unvulcanized; Polymeric Materials	-
4	DIN 53529 -3; ISO 6502 -1; ISO 11443; GFT010; GFT011; GFT -D-Melt; ASTM D 5930; ISO 17744; GFT 100; GFT 101; GFT 102; GFT 103	rubbers; plastics	-
5	GFT 104; GFT 105; GFT 106; GFT 107; GFT 108; GFT 109; GFT 111; GFT 112; GFT 113; GFT 114; GFT 115; GFT 116	-	-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Siemensstraße 2, Buchen Odenwald, 74722, DE

49.52599, 9.33615

Open in Maps

← All accredited testing labs in Germany

Accreditation data refreshed from the DAKKS register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.