FindTestingLabs
Registers refreshed 2026-10-25.See refresh dates
Germany

WKStenzel

Hammscher Weg 63, 47533, Kleve, Germany

DAKKS D-PL-23314-01-00DAKKS D-PL-23314-01-01ISO/IEC 17025Register refreshed 2026-10-23

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
27
DAKKS certificates
2
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 27 standard numbers and the 24 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO12
ISO 3452-1Non-destructive testing - Penetrant testing - Part 1: General principles
ISO 5579Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules
ISO 9934-1Non-destructive testing - Magnetic particle testing - Part 1: General principles
ISO 16810Non-destructive testing - Ultrasonic testing - General principles
ISO 16826Non-destructive testing - Ultrasonic testing - Testing for discontinuities perpendicular to the surface
ISO 16827Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities
ISO 17405Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion
ISO 17636-1Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film
ISO 17637Non-destructive testing of welds - Visual testing of fusion-welded joints
ISO 17638Non-destructive testing of welds - Magnetic particle testing
ISO 17640Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
ISO 22825Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
EN8
EN 1369Founding - Magnetic particle testing
EN 1370
EN 1371-1Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings
EN 1371-2Founding - Liquid penetrant testing - Part 2: Investment castings
EN 10160Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method)
EN 10308Non-destructive testing - Ultrasonic testing of steel bars
EN 12681-1
EN 13018Non-destructive testing - Visual testing - General principles
EN 10228 series4
EN 10228-1Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
EN 10228-2Non-destructive testing of steel forgings - Part 2: Penetrant testing
EN 10228-3Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings
EN 10228-4Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
EN 12680 series3
EN 12680-1Founding - Ultrasonic testing - Part 1: Steel castings for general purposes
EN 12680-2
EN 12680-3Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings

Read from the scope as published by DAKKS. Register refreshed 2026-10-23.

Scope as published by DAKKS

7 lines
DAKKS

ISO/IEC 17025

Active

D-PL-23314-01-00

View scope

Accredited scope, certificate D-PL-23314-01-00

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018--
2DIN EN ISO/IEC 17000--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

DAKKS

ISO/IEC 17025

Active

D-PL-23314-01-01

View scope

Accredited scope, certificate D-PL-23314-01-01

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018metallischen Werkstoffen-
2DIN EN 12681-1; DIN EN ISO 5579; DIN EN ISO 17636-1; DIN EN ISO 16810; DIN EN ISO 17640; DIN EN ISO 16826; DIN EN ISO 16827; DIN EN 12680-1; DIN EN 12680-2metallischen Werkstoffen und Bauteilen der Anlagentechnik-
3DIN EN 12680-3; DIN EN 10160; DIN EN ISO 17405; DIN EN ISO 22825; DIN EN 10308; SEP 1915; SEP 1921; SEP 1922; SEP 1923; DIN EN 10228-3; DIN EN 10228-4Gussstücke aus Guss - eisen mit Kugelgraphit; Flacherzeugnissen aus Stahl; Plattierungen hergestellt durch Schweißen, Walzen und Sprengen; Schweißverbindungen in austenitischen Stählen und Nickellegierungen; Stäben aus Stahl; Stahlrohren; Schmiedestücken und geschmiedeten Stabstahl; Gussstücken aus ferritischem Stahl; Schmiedestücken aus Stahl; Schmiedestücken aus ferritischem oder martensitischem Stahl; Schmiedestücken aus austenitischem und austenitisch-ferritischem nichtrostendem Stahl-
4DIN EN 10228 -1; DIN EN ISO 9934 -1; DIN EN ISO 17638; DIN EN 1369; SEP 1935; DIN EN ISO 3452 -1; DIN EN 10228 -2; DIN EN 1371 -1; DIN EN 1371 -2; DIN EN ISO 17637; DIN EN 13018; DIN EN 1370Schmiedestücken aus Stahl; Schweißverbindungen; Gießereiwesen; Gussstücken aus Stahl; Sand -, Schwerkraft -kokillen- und Niederdruckkokillengussstücke; Feingussstücke-
5AD 2000-Merkblatt HP 5/3; SEP 1916; SEP 1917Schweißverbindungen; schmelzgeschweißter ferritischer Stahlrohre; pressgeschweißter Rohre aus ferritischen Stählen-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Hammscher Weg 63, Kleve, 47533, DE

51.81017, 6.14865

Open in Maps
← All accredited testing labs in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.