Dorfner Anzaplan
Scharhof 1, 92242, Hirschau, Germany
- Accredited standards
- 130
- DAKKS certificates
- 7
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 130 standard numbers and the 74 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO51
ISO 695Glass - Resistance to attack by a boiling aqueous solution of mixed alkali - Method of test and classification
ISO 719Glass - Hydrolytic resistance of glass grains at 98 °C - Method of test and classification
ISO 720Glass - Hydrolytic resistance of glass grains at 121 °C - Method of test and classification
ISO 5667-5Water quality - Sampling - Part 5: Guidance on sampling of drinking water from treatment works and piped distribution systems
ISO 5667-6Water quality - Sampling - Part 6: Guidance on sampling of rivers and streams
ISO 5814Water quality - Determination of dissolved oxygen - Electrochemical probe method
ISO 5961Water quality - Determination of cadmium by atomic absorption spectrometry
ISO 6878Water quality - Determination of phosphorus - Ammonium molybdate spectrometric method
ISO 7027-1Water quality - Determination of turbidity - Part 1: Quantitative methods
ISO 7086-1Glass hollowware in contact with food - Release of lead and cadmium - Part 1: Test method
ISO 7393-2Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-dialkyl-1,4-phenylenediamine, for routine control purposes
ISO 7887Water quality - Examination and determination of colour
Show all 51
ISO 7980Water quality - Determination of calcium and magnesium - Atomic absorption spectrometric method
ISO 8005Carbonaceous materials used in the production of aluminium - Green and calcined coke - Determination of ash content
ISO 9277Determination of the specific surface area of solids by gas adsorption - BET method
ISO 9562Water quality - Determination of adsorbable organically bound halogens (AOX)
ISO 10523Water quality - Determination of pH
ISO 10694Soil quality - Determination of organic and total carbon after dry combustion (elementary analysis)
ISO 11465Sludge and solid environmental matrices - Determination of dry residue or water content and calculation of the dry matter fraction on a mass basis
ISO 11466Soil quality - Extraction of trace elements soluble in aqua regia
ISO 11732Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection
ISO 11885Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
ISO 11905-1Water quality - Determination of nitrogen - Part 1: Method using oxidative digestion with peroxodisulfate
ISO 11969Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique)
ISO 12020Water quality - Determination of aluminium - Atomic absorption spectrometric methods
ISO 12677Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method
ISO 12846Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment
ISO 13320Particle size analysis - Laser diffraction methods
ISO 13395Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection
ISO 14402Water quality - Determination of phenol index by flow analysis (FIA and CFA)
ISO 14403-1Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA)
ISO 14403-2Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA)
ISO 14719Chemical analysis of refractory material glass and glazes - Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline
ISO 14911Water quality - Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography - Method for water and waste water
ISO 15586Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace
ISO 15587-1Water quality - Digestion for the determination of selected elements in water - Part 1: Aqua regia digestion
ISO 15587-2Water quality - Digestion for the determination of selected elements in water - Part 2: Nitric acid digestion
ISO 15681-1Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Part 1: Method by flow injection analysis (FIA)
ISO 15681-2Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Part 2: Method by continuous flow analysis (CFA)
ISO 15682Water quality - Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection
ISO 15705Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed-tube method
ISO 15923-1Water quality - Determination of selected parameters by discrete analysis systems - Part 1: Ammonium, nitrate, nitrite, chloride, orthophosphate, sulfate and silicate with photometric detection
ISO 17289Water quality - Determination of dissolved oxygen - Optical sensor method
ISO 17294-2Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes
ISO 17852Water quality - Determination of mercury - Method using atomic fluorescence spectrometry
ISO 18412Water quality - Determination of chromium(VI) - Photometric method for weakly contaminated water
ISO 19458Water quality - Sampling for microbiological analysis
ISO 19579Solid mineral fuels - Determination of sulfur by IR spectrometry
ISO 21078-1Determination of boron (III) oxide in refractory products - Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes
ISO 23071Refractory products - Determination of reduced species in carbon containing refractories by XRD
ISO 23913Water quality - Determination of chromium(VI) - Method using flow analysis (FIA and CFA) and spectrometric detection
DIN43
DIN 12116
DIN 18132
DIN 38402-A 11
DIN 38402-A 12
DIN 38402-A 13
DIN 38404-C3
DIN 38404-C 6
DIN 38405-D1
DIN 38405-D4
DIN 38405-D9
DIN 38405-D13
DIN 38405-D24
Show all 43
DIN 38405-D27
DIN 38405-D29
DIN 38405-D35
DIN 38406-5
DIN 38406-E3
DIN 38406-E5
DIN 38406-E6
DIN 38406-E7
DIN 38406-E8
DIN 38406-E11
DIN 38406-E13
DIN 38406-E14
DIN 38406-E32
DIN 38406-E33
DIN 38409-H1
DIN 38409-H2
DIN 38409-H16
DIN 38409-H41
DIN 38409-H44
DIN 38409-H 7
DIN 51001
DIN 51081
DIN 51084
DIN 51085
DIN 51086-2
DIN 51705
DIN 51718
DIN 51720
DIN 51903
DIN 53770-1
DIN 66165-2
EN24
EN 196-2Methods of testing cement - Part 2: Chemical analysis of cement
EN 459-2
EN 725-1
EN 872Water quality - Determination of suspended solids - Method by filtration through glass fibre filters
EN 933-10
EN 1233Water quality - Determination of chromium - Atomic absorption spectrometric methods
EN 1388-1
EN 1388-2
EN 1484Water analysis - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC)
EN 1622Water quality - Determination of the threshold odour number (TON) and threshold flavour number (TFN)
EN 1899-1Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea addition (ISO 5815:1989, modified)
EN 1899-2Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 2: Method for undiluted samples
Show all 24
EN 12260Water quality - Determination of nitrogen - Determination of bound nitrogen (TNb), following oxidation to nitrogen oxides
EN 12457-4Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
EN 13346Characterization of sludges - Determination of trace elements and phosphorus - Aqua regia extraction methods
EN 13656
EN 13657Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements
EN 13925-1
EN 13925-2
EN 17289-2
EN 17289-3
EN 25813Water quality - Determination of dissolved oxygen - Iodometric method
EN 26777Water quality - Determination of nitrite - Molecular absorption spectrometric method
EN 27888Water quality - Determination of electrical conductivity
ISO 10304 series3
ISO 10304-1Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
ISO 10304-3Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate
ISO 10304-4Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination
ISO 21068 series3
ISO 21068-1Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon - Part 1: General information, terminology and sample preparation
ISO 21068-2Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon - Part 2: Determination of volatile components, total carbon, free carbon, silicon carbide, total and free silicon, free and surface silica
ISO 21068-3Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents
ISO 787 series3
ISO 787-5General methods of test for pigments and extenders - Part 5: Determination of oil absorption value
ISO 787-10General methods of test for pigments and extenders - Part 10: Determination of density - Pyknometer method
ISO 787-11General methods of test for pigments and extenders - Part 11: Determination of tamped volume and apparent density after tamping
Other standards3
38402-A 30
38404-C 4
USP 38
DIN 51720; DIN 51903; DIN 66165 -2; OENORM S 1002; CEN TC187 WG4 N268; VDLUFA VOLUME II.1 6.3; VDLUFA VOLUME II.1 6.4; ChP No. 4203; DIN ISO 695; DIN 12116; DIN ISO 719; DIN ISO 720
DIN 38402 -A 11; DIN 38402 -A 12; DIN ISO 5667 -5 (A 14); DIN 38402 -A 30; DIN EN ISO 15587 -1 (A 31); DIN EN ISO 15587 -2 (A 32); DIN EN ISO 19458 (K 19); DEV B1/2; DIN EN ISO 7887 (C 1); DIN 38404 -C 4; DIN EN ISO 10523 (C 5); DIN 38404 -C 6
DIN EN ISO 7393 -2; DIN EN ISO 5814; DIN ISO 17289; DIN ISO 5667 -5; DIN EN ISO 19458; DIN EN ISO 17294 -2; DIN EN ISO 10304 -1
DIN 38402 -A 11: 2009 -02; DIN EN ISO 5667 -6: 2016 -12; DIN 38402 -A 13: 1985 -12; DIN 38402 -A 12: 1985 -06; DIN 38402 -A 30: 1998 -07; DIN 38404 -C 4: 1976 -12; DIN EN ISO 10523: 2012 -04; DIN EN 27888: 1993 -11; DIN EN 1622: 2006 -10; DIN EN ISO 7887: 2012 -04; DIN EN ISO 7027: 2000 -04; DIN EN ISO 5814: 2013 -03; DIN ISO 17289: 2014 -12; DIN EN 25813: 1993 -01; DIN 38404 -C 6: 1984 -05
DIN EN ISO 11885: 2009 -09; DIN EN ISO 12020: 2000 -05; DIN EN ISO 17294 -2: 2024 -12; DIN EN ISO 15586: 2004 -02; DIN EN ISO 11969: 1996 -11; DIN 38405 -D 35: 2004 -09; DIN 38406 -E 6: 1998 -07; DIN EN ISO 5961: 1995 -05; DIN 38406 -E 3: 2002 -03; DIN EN ISO 7980: 2000 -07; DIN EN ISO 14911: 1999 -12; DIN EN 1233: 1996 -08
DIN 38404 -C 3: 2005 -07; DIN EN ISO 7887: 2012 -04; DIN EN ISO 11732: 2005 -05; DIN 38406 -E 5: 1983 -10; DIN EN ISO 14911: 1999 -12; DIN ISO 15923 -1: 2014 -07; DIN EN 26777: 1993 -04; DIN EN ISO 10304 -1: 2009 -07; DIN EN ISO 13395: 1996 -12; DIN 38405 -D 9: 2011 -09; DIN 38405 -D 29: 1994 -11; DIN EN ISO 6878: 2004 -09; DIN EN ISO 15681 -1: 2005 -05; DIN EN ISO 15681 -2: 2005 -05; DIN 38405 -D 4 -1, 1985 -07
ISO 7086-1; DIN EN 1388-1; DIN EN 1388-2; DIN EN ISO 11885; DIN EN ISO 17294-2; DIN 71-3
DIN EN ISO 10304 -1 2009 -07; DIN EN ISO 17294 -2 2024 -12; DIN EN 27888 1993 -11; DIN EN ISO 7887 2012 -04; DIN EN 1622 2006 -10 (Annex C); DEV B 1/2 1971; DIN EN ISO 10523 2012 -04
DIN EN ISO 11885: 2009 -09; DIN 38406 -E 8: 2004 -10; DIN EN ISO 17294 -2: 2024 -12; DIN EN ISO 15586: 2004 -02; DIN EN ISO 7980: 2000 -07; DIN EN ISO 14911: 1999 -12; DIN EN 1899 -1: 1998 -05; DIN EN 1899 -2: 1998 -05; DIN 38409 -H 41: 1980 -12; DIN 38409 -H 44: 1992 -05; DIN ISO 15705: 2003 -01; DIN 38409 -H 16 -2: 1984 -06; DIN 38409 -H 16 -1: 1984 -06; DIN EN ISO 14402: 1999 -12; DIN EN 872: 2005 -04; DIN 38409 -H 2 -3: 1987 -03; DIN 38409 -H 7: 2005 -12; DIN EN 1484: 1997 -08
DIN EN 13346; DIN EN 13656; DIN EN ISO 21068 -1; DIN 51001; DIN 51001, supplementary sheet 1; DIN 53770 -1; QMA -212; ISO 8005
DIN ISO 9277; QMA 250; DIN EN 13925-1; DIN EN 13925-2; ISO 23071
DIN EN 1484: 1997 -08; DIN EN 12260: 2003 -12; DIN EN ISO 11905 -1: 1998 -08; DIN EN ISO 9562: 2005 -02
DIN EN ISO 21078 -1; DIN ISO 10694; DIN EN 725 -1; DIN EN 17289 -2; DIN EN 17289 -3; DIN 18132; DIN 51081; DIN 51084; DIN 51085; DIN 51086 -2; DIN 51705; DIN 51718
DIN EN ISO 11885; DIN EN ISO 17294 -2; DIN ISO 11465; DIN ISO 11466; DIN EN 459 -2; DIN EN 196 -2; DIN EN 933 -10; DIN 51081
VGB-M-701 No. 1.1; VGB-M-701 No. 2.1; VGB-M-701 No. 2.3; VGB-M-701 No. 2.4; VGB-M-701 No. 4; VGB-M-701 No. 8.7; DIN EN ISO 11885:2009-09; VGB-M-701 No. 8.8; VGB-M-701, No. 8.10; VGB-M-701, No. 8.11; VGB-M-701 No. 8.12; DIN 51081:2002:12; VGB-M-701 No. 9; DIN EN ISO 17294-2:2024:12
ISO 13320; ISO 19579; DIN EN ISO 787 -5; DIN ISO 787 -10; DIN EN ISO 787 -11; DIN EN ISO 11885; DIN EN ISO 12677; DIN EN ISO 14719; DIN EN ISO 17294 -2; DIN EN ISO 21068 -2; DIN EN ISO 21068 -3
DIN EN 27888; DIN EN ISO 10304 -1; DIN 38405 -D 24; DIN 38406 -E 5; DIN EN ISO 11885; DIN EN ISO 17294 -2; DIN 38409 -H 1; DIN 38409 -H 2; DIN EN 872; DIN EN 1899 -2
DIN EN ISO 11885: 2009 -09; DIN 38406 -E 32: 2000 -05; DIN EN ISO 15586: 2004 -02; DIN EN ISO 17294 -2: 2024 -12; DIN 38406 -E 13: 1992 -07; DIN EN ISO 14911: 1999 -12; DIN 38406 -E 7: 1991 -09; DIN 38406 -E 33: 2000 -06; DIN 38406 -E 14: 1992 -07; DIN 38406 -E 11: 1991 -09; DIN EN ISO17852: 2008 -04; DIN EN ISO 12846: 2012 -08
DIN EN ISO 10304 -1: 2009 -07; DIN EN ISO 15682: 2002 -01; DIN ISO 15923 -1: 2014 -07; DIN EN ISO 10304 -4: 1999 -07; DIN 38405 -D 1 -1 and D 1 -2: 1985 -12; DIN 38405 -D 1 -3 and D 1 -4: 1985 -12; DIN 384 05 -D 5 -1: 1985 -01; DIN 38405 D 5 -2:1985 -01; DIN 38405 -D 13 -2: 1981 -02; DIN EN ISO 14403 -1: 2012 -10; DIN EN ISO 14403 -2: 2012 -10; DIN 384 05 -D 7: 2002 -04; DIN 38405 -D 13 -1: 1981 -02; DIN 38405 -D 24: 1987 -05; DIN EN ISO 10304 -3: 1997 -11; DIN EN ISO 23913: 2009 -09; DIN EN ISO 18412: 2007 -02; DIN 38405 -D 27: 1992 -07
DIN EN ISO 17294 -2 2024 -12; DIN EN ISO 10304 -1 2009 -07; DIN 38406 -5 1983 -10
LAGA PN 98; DIN EN 13657; DIN EN 12457 -4
European Pharmacopoeia 9; Japan JP XVII; USA USP 38; Ch. P. No. 4201
Read from the scope as published by DAKKS. Register refreshed 2026-11-06.
Scope as published by DAKKS
31 lines
ISO/IEC 17025
ActiveD-PL-17744-01-00
ISO/IEC 17025
ActiveD-PL-17744-01-01
ISO/IEC 17025
ActiveD-PL-17744-01-02
ISO/IEC 17025
ActiveD-PL-17744-01-03
ISO/IEC 17025
ActiveD-PL-17744-01-04
ISO/IEC 17025
ActiveD-PL-17744-01-05
ISO/IEC 17025
ActiveD-PL-17744-01-06
Location
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.