Site-Lab
14 Torver Close, NE137HJ, Newcastle Upon Tyne, United Kingdom
- Accredited standards
- 3
- UKAS certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the UKAS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 3 standard numbers and the 1 official names we hold. When no standard matches, it searches the method text of every scope line.
EN 12697-13
EN 12697-27Bituminous mixtures - Test methods - Part 27: Sampling
EN 13036-1
BS EN 12697-27:2017 Site Temperature of bituminous mixtures - in the hopper of a paver - in the augers of a paver - in laid-but-not-rolled material BS 598-1: 2011 Site Temperature measurement - Measurement material temperature after it has been laid and before or during rolling BS EN 12697-13:2017 Contact thermometer Site Temperature measurement -Measurements of temperature in a paver hopper BS EN 12697-13:2017 Infrared thermometer Site BITUMINOUS ROAD SURFACING In-situ density - Dielectric method BS 594987:2024 Annex I and Documented In-House Method No 05 Site ROAD PAVEMENT SURFACES Measurement of pavement surface macro texture depth using a volumetric patch technique BS EN 13036-1:2010 Site Surface regularity using a rolling straight-edge Specification for Highway Works HMSO February 2016 Clause 702; BS 598-1; BS 594987; ISO/IEC 17025:2017 Schedule of Accreditation issued by United Kingdom Accreditation Service 2; IEC 17025
Read from the scope as published by UKAS. Register refreshed 2026-10-23.
Scope as published by UKAS
2 lines
ISO/IEC 17025
Active7989
Accredited scope, certificate 7989
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ISO/IEC 17025:2017 | Asphalt | - |
| 2 | BS EN 12697-27:2017 Site Temperature of bituminous mixtures - in the hopper of a paver - in the augers of a paver - in laid-but-not-rolled material BS 598-1: 2011 Site Temperature measurement - Measurement material temperature after it has been laid and before or during rolling BS EN 12697-13:2017 Contact thermometer Site Temperature measurement -Measurements of temperature in a paver hopper BS EN 12697-13:2017 Infrared thermometer Site BITUMINOUS ROAD SURFACING In-situ density - Dielectric method BS 594987:2024 Annex I and Documented In-House Method No 05 Site ROAD PAVEMENT SURFACES Measurement of pavement surface macro texture depth using a volumetric patch technique BS EN 13036-1:2010 Site Surface regularity using a rolling straight-edge Specification for Highway Works HMSO February 2016 Clause 702; BS 598-1; BS 594987; ISO/IEC 17025:2017 Schedule of Accreditation issued by United Kingdom Accreditation Service 2; IEC 17025 | BITUMINOUS MIXTURES for roads and other paved areas; BITUMINOUS ROAD SURFACING; ROAD PAVEMENT SURFACES | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Accreditation data refreshed from the UKAS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the UKAS entry linked above.