US Environmental Protection Agency
26 W Martin Luther King Dr, 45268, Cincinnati, OH, United States
- Scope lines
- 3
- A2LA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
We could not match the method references in this lab’s scope to published test standard numbers. The full scope as published is below.
Only this lab. Searches the method, matrix and range of each of the 3 scope lines.
A2LA certificate 5160.01 · 3 lines
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert No. 5160.01) 01/03/2025 Page 1 of 2
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017
US ENVIRONMENTAL PROTECTION AGENCY
26 W Martin Luther King Dr.
Cincinnati, OH 45268
Tracy Dahling Phone: 513 569 7429
CALIBRATION
Valid To: February 28, 2027 Certificate Number: 5160.01
In recognition of the successful completion of the A2LA evaluation process (including an assessment of
the organization’s compliance with R205 – A2LA’s Calibration Program Requirements), accreditation is
granted to this laboratory to perform the following calibrations
1:
I. Mechanical
Parameter/Equipment Range CMC2 (±) Comments
Balances3
(1 to 20) mg
(20 to 50) mg
(50 to 200) mg
(200 to 500) mg
(500 to 1000) mg
(1 to 2) g
(2 to 5) g
(5 to 10) g
(10 to 20) g
(20 to 50) g
(50 to 100) g
(100 to 200) g
(200 to 500) g
(500 to 1000) g
(1 to 2) kg
(2 to 5) kg
0.0056 mg
0.0060 mg
0.0071 mg
0.0082 mg
0.019 mg
0.024 mg
0.041 mg
0.073 mg
0.14 mg
0.31 mg
0.67 mg
1.3 mg
3.2 mg
6.3 mg
28 mg
43 mg
ASTM Class 1 weights;
SOP K-IO-RPIS-SOP-1224 | ||
| 2 | SOP K-IO-RPIS-SOP-1225; SOP K-IO-RPIS-SOP-1223 | - | See scope document |
| 3 | Extracted from the scope document; tables may not line up. View scope for the original. For the calibrations to which this accreditation applies, please refer to the laboratory’s Calibration Scope of Accreditation.
Accredited Laboratory
A2LA has accredited
US ENVIRONMENTAL PROTECTION AGENCY
Cincinnati, OH
for technical competence in the field of
Calibration
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories . This laboratory also meets R205 – Specific
Requirements: Calibration Laboratory Accreditation Program. This accreditation demonstrates technical competence for a
defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
Presented this 3rd day of January 2025.
_______________________
Mr. Trace McInturff, Vice President, Accreditation Services
For the Accreditation Council
Certificate Number 5160.01
Valid to February 28, 2027 | ||
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.