Italy

Vernay Italia S.r.l. Unipersonale

Loc. Rilate, 21, 14100, Asti, Italy

ACCREDIA 01338ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 9
ACCREDIA certificate: 1
Site in our directory: 1

ACCREDIA accredited scope

What this lab is accredited for

Our reading of the ACCREDIA scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 9 standard numbers and the 9 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO 37Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain propertiesExclusion

Limits written next to it

ISO 37:2024 - escluso/except Par 6.3 _

Exclusion. Written next to it on line 1 of ACCREDIA certificate 01338.

ISO 48-4Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)Exclusion

Limits written next to it

ISO 48-4:2018 - escluso/except par

Exclusion. Written next to it on line 1 of ACCREDIA certificate 01338.

ISO 289-1Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 1: Determination of Mooney viscosity

ISO 815-1Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures

ISO 4650Rubber - Identification - Infrared spectrometric methodsSome clauses

Limits written next to it

ISO 4650:2012 - solo/only 3.2

Some clauses. Written next to it on line 1 of ACCREDIA certificate 01338.

ISO 6502-3Rubber - Measurement of vulcanization characteristics using curemeters - Part 3: Rotorless curemeter

ISO 11357-1Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles

ISO 11357-2Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step heightExclusion

Limits written next to it

ISO 11357-2:2020 - escluso/except

Exclusion. Written next to it on line 1 of ACCREDIA certificate 01338.

ISO 16232Road vehicles - Cleanliness of components and systems

Read from the scope as published by ACCREDIA. Register refreshed 2026-11-06.

Scope as published by ACCREDIA

1 line

ACCREDIA

ISO/IEC 17025

Active

01338

View scope

Accredited scope, certificate 01338

Line	Method	Matrix	Range
1	UNI CEI EN ISO/IEC 17025:2018; ISO 6502-3:2023; UNI ISO 289-1:2016; ISO 815-1:2019; ISO 48-4:2018; ISO 37:2024; ISO 4650:2012; QAP 150 rev. 2 2025; QAP 162 rev.1 2025; UNI EN ISO 11357-1:2023; UNI EN ISO 11357-2:2020; ISO 16232:2018	Gomma non vulcanizzata/Unvulcanized rubber; Gomma vulcanizzata o termoplastica/Rubber vulcanized or thermoplastic; Gomma vulcanizzata/Vulcanized rubber; Gomma/Rubber; Materiale solido in FVMQ (Fluorovinilmetossisilossano)/FVMQ solid material (Fluorovinylmethoxysiloxane); Materie plastiche/Plastics; Materie plastiche/Plastics - solo/only Gomma e plastica; Valvole controllo fluidi e componenti/Components of fluid circuits	See scope document

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Loc. Rilate, 21, Asti, 14100, IT

44.92093, 8.17318

Open in Maps

← All accredited testing labs in Italy

Accreditation data refreshed from the ACCREDIA register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ACCREDIA entry linked above.