FindTestingLabs
Registers collected 2026-08-22.See collection dates
United States

SolarPTL, LLC.

Tempe, AZ, United States

A2LA|921.01A2LA|921.02ISO/IEC 17025Register collected 2026-08-22
Certificates
2
Scope items
8
Locations
3

Contact this laboratory

Visit websiteOpen A2LA register entry
Watch this lab

We will email you if this laboratory’s accreditation status or scope changes. No newsletter, only changes.

Work at SolarPTL, LLC.?

Claim this profile to keep it accurate.

Claim this profile

Register record

A2LACollected
921.01Active
921.02Active

Certificates and scope

2
A2LA

ISO/IEC 17025

Active

921.01

View scope

Accredited scope, certificate 921.01

DisciplineMethodMatrixRange
materialsIEC 61215-4.10; UL 61215-2-4.10; IEC 61730-2-10.31; UL 61730-2-10.31; ANSI/UL 1703-33; ULC/ORD C1703-01-5.15; UL 9703 33; IEC 61215-4.4; UL 61215-2-4.4; ANSI/UL 790; ANSI/UL 1703, Sections 16 and 31; ULC/ORD C1703-01-5.14; ANSI/UL 2703, Section 15; IEC 61730-2-10.17; UL 61730-2-10.17; IEC 62688-20.19; IEC 61730-2 10.18; IEC 61215-2 4.21; IEC 61215-4.5; UL 61215-2-4.5; IEC 61215-2; ANSI/UL 1703-19; ULC/ORD C1703-01-5.2; IEC 61730-2-10.15; UL 61730-2-10.15; ANSI/UL 3703-39--
mechanicalIEC 61215-4.1; UL 61215-2-4.1; IEC 61730-2-10.2; UL 61730-2-10.2; CAN/CSA-C22.2, No. 61730-2-10.1; IEC 61730-1-5.6.3; IEC 61730-2-10.6; UL 61730-2-10.6; IEC 61215-4.17; UL 61215-2-4.17; ANSI/UL 1703-42; ULC/ORD C1703-01-5.24; CAN/CSA-C22.2, No. 61730-2-10.10C; IEC 61730-2-10.26; UL 61730-2-10.26; ANSI/UL 1703- 38; ULC/ORD C1703-01-5.20; ANSI/UL 2703-20; IEC 61730-2-10.21; UL 61730-2-10.21; CAN/CSA-C22.2, No. 61730-2-10.10; ANSI/UL 1703-23; ULC/ORD C1703-01-5.6; UL 9703 24; ISO/IEC 17025:2017Photovoltaic Modules0.5 to 300 mm
mechanicalIEC 61730-2-10.22; UL 61730-2-10.22; IEC 61730-2-10.7; UL 61730-2-10.7; ANSI/UL 1703-41; ULC/ORD C1703-01-5.23; IEC 61215-4.16; UL 61215-2-4.16; ANSI/UL 2703-21; ANSI/UL 3703-47; IEC 61730-2-10.23; UL 61730-2-10.23; ANSI/UL 1703-24; ULC/ORD C1703-01-5.7; IEC 61730-2-10.10; UL 61730-2-10.10; CAN/CSA-C22.2, No. 61730-2-10.3; ANSI/UL 1703-22; ULC/ORD C1703-01-5.5; IEC 61215-4.14; UL 61215-2-4.14; IEC 61730-2-10.27; UL 61730-2-10.27; ANSI/UL 1703-29; ULC/ORD C1703-01-5.12; CAN/CSA-C22.2, No. 61730-2-10.10A; ANSI/UL 2703-14; ANSI/UL 3703-60; IEC 61215-2 4.22; ANSI/UL 2703-23; IEC 61730-2-10.32 MST-55; UL 61730-2-10.32; IEC 61215-4.13; UL 61215-2-4.13; IEC 61730-2-10.30; UL 61730-2-10.30; IEC 61730-2-10.33; UL 61730-2-10.33; ANSI/UL 1703-36; ULC/ORD C1703-01-5.18; IEC 61215-4.12; UL 61215-2-4.12; IEC 61730-2-10.29; UL 61730-2-10.29; ANSI/UL 2703-18; UL9703 36; IEC 61215-4.19 & 4.8; UL 61215-2-4.19 & 4.8; ANSI/UL 1703-35; ULC/ORD C1703-01-5.17; IEC 61215-4.11; UL 61215-2-4.11; ANSI/UL 2703-17; UL 9703 35; IEC 61730-2-10.28; UL 61730-2-10.28--
mechanical---

Ranges are reproduced from the accredited scope document as published. An absent range means the register did not state one.

A2LA

ISO/IEC 17025

Active

921.02

View scope

Accredited scope, certificate 921.02

DisciplineMethodMatrixRange
materialsIEC 61215-4.10; UL 61215-2-4.10; IEC 61730-2-10.31; UL 61730-2-10.31; ANSI/UL 1703-33; ULC/ORD C1703-01-5.15; UL 9703 33; IEC 61215-4.4; UL 61215-2-4.4; ANSI/UL 790; ANSI/UL 1703, Sections 16 and 31; ULC/ORD C1703-01-5.14; ANSI/UL 2703, Section 15; IEC 61730-2-10.17; UL 61730-2-10.17; IEC 62688-20.19; IEC 61730-2 10.18; IEC 61215-2 4.21; IEC 61215-4.5; UL 61215-2-4.5; IEC 61215-2; ANSI/UL 1703-19; ULC/ORD C1703-01-5.2; IEC 61730-2-10.15; UL 61730-2-10.15; ANSI/UL 3703-39--
mechanicalIEC 61730-2-10.22; UL 61730-2-10.22; IEC 61730-2-10.7; UL 61730-2-10.7; ANSI/UL 1703-41; ULC/ORD C1703-01-5.23; IEC 61215-4.16; UL 61215-2-4.16; ANSI/UL 2703-21; ANSI/UL 3703-47; IEC 61730-2-10.23; UL 61730-2-10.23; ANSI/UL 1703-24; ULC/ORD C1703-01-5.7; IEC 61730-2-10.10; UL 61730-2-10.10; CAN/CSA-C22.2, No. 61730-2-10.3; ANSI/UL 1703-22; ULC/ORD C1703-01-5.5; IEC 61215-4.14; UL 61215-2-4.14; IEC 61730-2-10.27; UL 61730-2-10.27; ANSI/UL 1703-29; ULC/ORD C1703-01-5.12; CAN/CSA-C22.2, No. 61730-2-10.10A; ANSI/UL 2703-14; ANSI/UL 3703-60; IEC 61215-2 4.22; ANSI/UL 2703-23; IEC 61730-2-10.32 MST-55; UL 61730-2-10.32; IEC 61215-4.13; UL 61215-2-4.13; IEC 61730-2-10.30; UL 61730-2-10.30; IEC 61730-2-10.33; UL 61730-2-10.33; ANSI/UL 1703-36; ULC/ORD C1703-01-5.18; IEC 61215-4.12; UL 61215-2-4.12; IEC 61730-2-10.29; UL 61730-2-10.29; ANSI/UL 2703-18; UL9703 36; IEC 61215-4.19 & 4.8; UL 61215-2-4.19 & 4.8; ANSI/UL 1703-35; ULC/ORD C1703-01-5.17; IEC 61215-4.11; UL 61215-2-4.11; ANSI/UL 2703-17; UL 9703 35; IEC 61730-2-10.28; UL 61730-2-10.28--
mechanical---
mechanicalIEC 61215-4.1; UL 61215-2-4.1; IEC 61730-2-10.2; UL 61730-2-10.2; CAN/CSA-C22.2, No. 61730-2-10.1; IEC 61730-1-5.6.3; IEC 61730-2-10.6; UL 61730-2-10.6; IEC 61215-4.17; UL 61215-2-4.17; ANSI/UL 1703-42; ULC/ORD C1703-01-5.24; CAN/CSA-C22.2, No. 61730-2-10.10C; IEC 61730-2-10.26; UL 61730-2-10.26; ANSI/UL 1703- 38; ULC/ORD C1703-01-5.20; ANSI/UL 2703-20; IEC 61730-2-10.21; UL 61730-2-10.21; CAN/CSA-C22.2, No. 61730-2-10.10; ANSI/UL 1703-23; ULC/ORD C1703-01-5.6; UL 9703 24; ISO/IEC 17025:2017Photovoltaic Modules0.5 to 300 mm

Ranges are reproduced from the accredited scope document as published. An absent range means the register did not state one.

Other Locations

2 other sites in this organization

Building A Tempe, AZ, US
View
← All accredited testing labs in United States

Accreditation data collected from the A2LA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.