Bundesanstalt für Materialforschung und -prüfung (BAM) Abteilung 7 / Bauwerkssicherheit
Unter den Eichen 87, 12205, Berlin, Germany
- Accredited standards
- 133
- DAKKS certificates
- 3
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 133 standard numbers and the 46 official names we hold. When no standard matches, it searches the method text of every scope line.
EN54
EN 933-1Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
EN 933-4Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index
EN 1015-17
EN 1107-1
EN 1109
EN 1110
EN 1296
EN 1297
EN 1363-1
EN 1363-2
EN 1366-7
EN 1426Bitumens and bituminous binders - Determination of needle penetration
Show all 54
EN 1427Bitumens and bituminous binders - Determination of the softening point - Ring and Ball method
EN 1542
EN 1634-2
EN 1766
EN 1848-1
EN 1849-1
EN 1850-1
EN 1928
EN 12039
EN 12311-1
EN 12390-3Testing hardened concrete - Part 3: Compressive strength of test specimens
EN 12390-5
EN 12593
EN 12607-3
EN 12617-4
EN 13057
EN 13295
EN 13302
EN 13381-4
EN 13381-8
EN 13395-4
EN 13398
EN 13501-1
EN 13501-2
EN 13589
EN 13596
EN 13653
EN 13702
EN 13820
EN 13823
EN 13880-3
EN 13880-5
EN 14223
EN 14224
EN 14691
EN 14692
EN 14693
EN 14694
EN 14695
EN 15715
EN 45545-2
EN 45545-3
ISO29
ISO 34-1Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
ISO 37Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 175Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals
ISO 188Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
ISO 812Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness
ISO 815-1Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures
ISO 815-2Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures
ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 1182Reaction to fire tests for products - Non-combustibility test
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 1431-1Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing
ISO 1431-3Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers
Show all 29
ISO 1716Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
ISO 1817Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
ISO 2781Rubber, vulcanized or thermoplastic - Determination of density
ISO 2808Paints and varnishes - Determination of film thickness
ISO 3219-2Rheology - Part 2: General principles of rotational and oscillatory rheometry
ISO 3384-1Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature
ISO 3384-2Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 2: Testing with temperature cycling
ISO 3387Rubber - Determination of crystallization effects by hardness measurements
ISO 3838Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods
ISO 4649Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
ISO 4662Rubber, vulcanized or thermoplastic - Determination of rebound resilience
ISO 5659-2Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test
ISO 5660-1Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
ISO 6133Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO 9239-1Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source
ISO 11925-2Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test
ISO 23529Rubber - General procedures for preparing and conditioning test pieces for physical test methods
DIN19
DIN 1996-6
DIN 4102-1
DIN 4102-2
DIN 4102-3
DIN 4102-8
DIN 4102-13
DIN 52013
DIN 52170-1
DIN 52170-2
DIN 52170-3
DIN 52170-4
DIN 53438-1
Show all 19
DIN 53438-2
DIN 53438-3
DIN 53504
DIN 53508
DIN 53512
DIN 53521
DIN 66137-2
ASTM6
ASTM D297
ASTM D412
ASTM D746
ASTM D1054
ASTM D2137
ASTM D2240Standard Test Method for Rubber Property - Durometer Hardness
EN 12697 series5
EN 12697-1Bituminous mixtures - Test methods - Part 1: Soluble binder content
EN 12697-2Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution
EN 12697-8Bituminous mixtures - Test methods - Part 8: Determination of void characteristics of bituminous specimens
EN 12697-20
EN 12697-23
EN 196 series4
EN 196-1
EN 196-2Methods of testing cement - Part 2: Chemical analysis of cement
EN 196-3
EN 196-6
ISO 527 series4
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 527-3Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
ISO 527-4Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
EN 1364 series3
EN 1364-1
EN 1364-2
EN 1364-4
EN 1365 series3
EN 1365-2
EN 1365-3
EN 1365-4
EN 13687 series3
EN 13687-1
EN 13687-2
EN 13687-3
ISO 48 series3
ISO 48-2Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2: Hardness between 10 IRHD and 100 IRHD
ISO 48-4Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)
ISO 48-7Rubber, vulcanized or thermoplastic - Determination of hardness - Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method
DIN EN ISO 2808; DIN EN ISO 3219 -2; DIN EN ISO 3838; DIN EN 933 -1; DIN EN 933 -4; DIN EN 1107 -1; DIN EN 1109; DIN EN 1110; DIN EN 1296; DIN EN 1297; DIN EN 1426; DIN EN 1427
DIN EN 196-2; DIN EN 196-3; DIN EN 196-6; DIN EN 1015-17; DIN EN 1542; DIN EN 1766; DIN EN 12390-3; DIN EN 12390-5; DIN EN 12617-4; DIN EN 13057; DIN EN 13295; DIN EN 13395-4; DIN EN 13687-1
ISO 5660-1; DIN 4102-2; DIN 4102-3; DIN 4102-8; DIN 4102-13; DIN EN 1363-1; DIN EN 1363-2; DIN EN 13501-2; DIN EN 45545-3; EAD 350402-00-1106; DIN EN 196-1
EN 1365-4; EN 1366-7; EN 1634-2; EN 13381-4; EN 13381-8; EN 13501-2
DIN EN 1848-1; DIN EN 1849-1; DIN EN 1850-1; DIN EN 1928; DIN EN 12039; DIN EN 12311-1; DIN EN 12593; DIN EN 12697-1; DIN EN 12697-2; DIN EN 12607-3; DIN EN 12697-8; DIN EN 12697-20; DIN EN 12697-23; DIN EN 13302
DIN EN 13398; DIN EN 13589; DIN EN 13596; DIN EN 13653; DIN EN 13687 -3; DIN EN 13702; DIN EN 13880 -3; DIN EN 13880 -5; DIN EN 14223; DIN EN 14224; DIN EN 14691; DIN EN 14692; DIN EN 14693
EN ISO 1182; EN ISO 1716; EN ISO 9239-1; EN ISO 11925-2; EN 13823; EN 13501-1; EN 1364-1; EN 1364-2; EN 1364-4; EN 1365-2; EN 1365-3
DIN 4102-1; DIN 53438-1; DIN 53438-2; DIN 53438-3; DIN EN 13820; DIN EN 15715; DIN EN 45545-2; DIN EN ISO 5659-2
DIN EN 14694; DIN EN 14695; DIN 1996 -6; DIN 52013; ETAG 032 -1; ETAG 032 -3; EAD 120093 -00 -0107; TP -BEL -B-1
ASTM D 412; DIN 53504; DIN EN ISO 527 -1; DIN EN ISO 527 -2; DIN EN ISO 527 -3; DIN EN ISO 527 -4; ISO 37; DIN ISO 34 -1; ISO 34 -1; DIN ISO 6133; ISO 6133
DIN 53521; DIN EN ISO 175; DIN ISO 1817; ISO 1817; DIN 53508; ISO 188; DIN ISO 1431 -1; ISO 1431 -1; DIN ISO 1431 -3; ISO 1431 -3
ASTM D 746 -14; ASTM D 2137; DIN ISO 812; ISO 812; DIN ISO 4649; ISO 4649; ASTM D 297; DIN 66137 -2; DIN EN ISO 1183 -1; ISO 2781
DIN ISO 815 -1; ISO 815 -1; DIN ISO 815 -2; ISO 815 -2; DIN ISO 3384 -1; ISO 3384 -1; ISO 3384 -2; ASTM D 1054; DIN 53512; ISO 4662
DIN ISO 23529; ISO 23529; ASTM D 2240; DIN EN ISO 868; DIN ISO 48 -4; ISO 48 -4; ISO 48 -7; DIN ISO 48 -2; ISO 48 -2; ISO 3387
DIN EN 13687-2; DIN 52170-1; DIN 52170-2; DIN 52170-3; DIN 52170-4; DAfStb Heft 401
Read from the scope as published by DAKKS. Register refreshed 2026-11-06.
Scope as published by DAKKS
21 lines
ISO/IEC 17025
ActiveD-PL-11075-01-00
ISO/IEC 17025
ActiveD-PL-11075-01-01
ISO/IEC 17025
ActiveD-PL-11075-01-02
Location
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.