Registers refreshed 2026-11-08.See refresh dates
Italy

STAZIONE SPERIMENTALE DEL VETRO S.C.P.A.

Via Briati 10, 30141, Murano, Italy

Visit website
ACCREDIA 00073ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
59
ACCREDIA certificate
1
Site in our directory
1
ACCREDIA accredited scope

What this lab is accredited for

Our reading of the ACCREDIA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 59 standard numbers and the 34 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO20
ISO 719Glass - Hydrolytic resistance of glass grains at 98 °C - Method of test and classification
ISO 720Glass - Hydrolytic resistance of glass grains at 121 °C - Method of test and classification
ISO 1893Refractory products - Determination of refractoriness under load - Differential method with rising temperature
ISO 3187Refractory products - Determination of creep in compression
ISO 4802-1Glassware - Hydrolytic resistance of the interior surfaces of glass containers - Part 1: Determination by titration method and classification
ISO 7086-1Glass hollowware in contact with food - Release of lead and cadmium - Part 1: Test method
ISO 7458Glass containers - Internal pressure resistance - Test methods

Limits written next to it

UNI EN ISO 7458:2004 - solo/only Met

Written next to it on line 2 of ACCREDIA certificate 00073.

ISO 7459Glass containers - Thermal shock resistance and thermal shock endurance - Test methods
ISO 7991Glass - Determination of coefficient of mean linear thermal expansion
ISO 8113Glass containers - Resistance to vertical load - Test method
ISO 9050Glass in building - Determination of luminous and solar characteristics of glazing
ISO 10304-1Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
Show all 20
ISO 12543-4Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability
ISO 12677Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method
ISO 14966Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
ISO 15202-1Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
ISO 15713Stationary source emissions - Sampling and determination of gaseous fluoride content
ISO 16258-1Workplace air - Analysis of respirable crystalline silica by X-ray diffraction - Part 1: Direct-on-filter method
ISO 16911-1Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method
ISO 21877Stationary source emissions— Determination of the mass concentration of ammonia - Manual method
ASTM13
ASTM C25Some clauses

Limits written next to it

ASTM C25-24 - solo/only sez 31

Some clauses. Written next to it on line 1 of ACCREDIA certificate 00073.

ASTM C113
ASTM C133Some clauses

Limits written next to it

ASTM C133-24 - solo/only sez 4-9

Some clauses. Written next to it on line 3 of ACCREDIA certificate 00073.

ASTM C134
ASTM C147

Limits written next to it

ASTM C147-86(2020) - solo/only Met

Written next to it on line 2 of ACCREDIA certificate 00073.

ASTM C149
ASTM C336
ASTM C338
ASTM C693
ASTM C965
ASTM D5373Some methods

Limits written next to it

ASTM D5373-21 - solo/only Met B

Some methods. Written next to it on line 1 of ACCREDIA certificate 00073.

ASTM D6522
ASTM E359
EN13
EN 410
EN 673
EN 1911Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method
EN 12619Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
EN 12898
EN 13284-1Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
EN 14181Stationary source emissions - Quality assurance of automated measuring systems
EN 14385Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V
EN 14789Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
EN 14790Stationary source emissions - Determination of the water vapour in ducts - Standard reference method
EN 14791Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
EN 14792Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: Chemiluminescence
EN 15058Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry
EN 993 series4
EN 993-1
EN 993-5
EN 993-9
EN 993-19
EPA4
EPA 3
EPA 306
EPA 3052
EPA 6010Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES)
ISO 7884 series3
ISO 7884-2Glass - Viscosity and viscometric fixed points - Part 2: Determination of viscosity by rotation viscometers
ISO 7884-6Glass - Viscosity and viscometric fixed points - Part 6: Determination of softening point
ISO 7884-8Glass - Viscosity and viscometric fixed points - Part 8: Determination of (dilatometric) transformation temperature
Other standards2
DIN 51001
MU 1998:13

Read from the scope as published by ACCREDIA. Register refreshed 2026-11-06.

Scope as published by ACCREDIA

6 lines
ACCREDIA

ISO/IEC 17025

Active

00073

View scope

Accredited scope, certificate 00073

LineMethodMatrixRange
1NIOSH 5026 1996; MU 1998:13; MU 2010:11; UNI ISO 16258-1:2017; DM 06/09/1994 GU n 288 10/12/1994 All 2 met B; ISO 14966:2019; ASTM C25-24 - solo/only sez 31; ASTM C25-24 + Reg UE 2066/2018 19/12/2018 GU UE L334 31/12/2018; ASTM E359-17 sez 8-15; ASTM E359-17 sez 17-24; ASTM E359-17 sez 17-24 + Reg UE 2066/2018 19/12/2018 GU UE L334 31/12/2018; ASTM E359-17 sez 8-15 + Reg UE 2066/2018 19/12/2018 GU UE L334 31/12/2018; ASTM E359-17 sez 26-32; ASTM E359-17 sez 34-38; ASTM D5373-21 - solo/only Met B; UNI EN ISO 12677:201Aria di ambienti di lavoro/Workplace air; Aria di ambienti di vita/Ambient air; Calcare/Limestone; Calce idrata/Hydrated Lime; Calce/Quicklime; Carbone/Coal; Cementi/Cements; Materiali refrattari/Refractory products; Ceramiche/Ceramic ware; Vetro ceramica/Glass ceramic ware; Vetro/Glass0.1 to 10 mg/l
2ASTM C149-14(2020); EN ISO 7459:2004; UNI EN ISO 7459:2004; UNI EN ISO 8113:2004; ASTM C147-86(2020); UNI EN ISO 7458:2004; ISO 4802-1:2023; ISO 7086-1:2019; EU PHARMA 01/2019:30201 Test A; USP-NF 2025 Issue 1 par 660; EU PHARMA 01/2019:30201 Test B; USP-NF 2025 Issue 1 par 660; EPA 306A 2007; EPA CTM 027 1997; UNI EN ISO 21877:2020; UNI EN 14385:2025; UNI EN 14181:2015; UNI EN 1911:2010 + UNI EN ISO 10304-1:2009; UNI EN 13284-1:2017; UNI EN 14791:2017; UNI CEN/TS 17021:2017; ISO 15713:2006; UNI CEN/TS 17638:2021Stationary source emissionsSee scope document
3DM 25/08/2000 SO GU n 223 23/9/2000 All 2; UNI 11079:2003; DM 21/03/1973 GU n° 104 20/04/1973 All IV sez 1 DM 26/04/1993 GU n° 162 13/07/1993 All III DM 22/07/1998 GU 228 30/09/1998; EN 993-1:2018; UNI EN 993-1:2019; EN 993-19:2004; UNI EN 993-19:2004; ISO 1893:2007; UNI EN 993-5:2019; ISO 3187:1989; EN 993-9:1997; UNI EN 993-9:1999; DIN 51001:2003; ASTM C133-24; ASTM C134-95(2023); ASTM C113-14(2019)Emissioni: flussi gassosi convogliati/Stack emission in conveyed gas flow; Imballaggi di vetro/Glass packaging; Materiali ed articoli destinati a venire in contatto con gli alimenti/Materials and articles intended to come into contact with foodstuffs; Materiali refrattari/Refractory products; Materie prime per vetro/Raw materials for glass, Vetro/Glass; Mattoni refrattari isolanti/Insulating Firebrick, Mattoni refrattari/Refractory Brick; Mattoni refrattari/Refractory BrickSee scope document
4EN 410:2011 + EN ISO 12543-4:2021 + ISO 9050:2003; UNI EN 410:2011 + UNI EN ISO 12543-4:2022 + ISO 9050:2003; EN 12898:2019; UNI EN 12898:2019; EN 673:2011; UNI EN 673:2011; LPO/MI/10-01 rev. 4 2012; LPO/MI/11-01 rev. 5 2023; EPA 3052 1996 + EPA 6010D 2018; UNI 10938:2001; ISO 7991:1987; ASTM C693-24; ISO 720:2020; ISO 719:2020; ISO 7884-8:1987; ASTM C965-23; ISO 7884-6:1987; ASTM C338-24; ASTM C336-71(2020); ISO 7884-2:1987Vetro per edilizia/Glass in building; Vetro/Glassto 100 %
5UNI EN 12619:2013/EC1:2013; UNI EN 14792:2017; UNI EN 15058:2017; UNI EN 14789:2017; UNI EN 14790:2017; UNI CEN/TS 17337:2019; EPA 3A 2017Stationary source emissionsSee scope document
6ISO 15202-1:2020; ASTM D6522-20; UNI EN ISO 16911-1:2013Stationary source emissionsSee scope document

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Via Briati 10, Murano, 30141, IT

45.45846, 12.35297

Open in Maps
← All accredited testing labs in Italy

Labs with overlapping accredited scope in Italy

Accreditation data refreshed from the ACCREDIA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ACCREDIA entry linked above.