Registers refreshed 2026-11-08.See refresh dates
Germany

GSI - Gesellschaft für Schweißtechnik International mbH

Aachener Straße 172, 40223, Düsseldorf, Germany

DAKKS D-PL-17370-01-00DAKKS D-PL-17370-01-01DAKKS D-PL-17370-01-02ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
80
DAKKS certificates
3
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 80 standard numbers and the 71 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO59
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 178Plastics - Determination of flexural properties
ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 527-3Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
ISO 643Steels - Micrographic determination of the apparent grain size
ISO 945-1Microstructure of cast irons - Part 1: Graphite classification by visual analysis
ISO 1463Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
ISO 2178Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
ISO 2360Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method
ISO 2409Paints and varnishes - Cross-cut test
ISO 2808Paints and varnishes - Determination of film thickness
ISO 3452-1Non-destructive testing - Penetrant testing - Part 1: General principles
Show all 59
ISO 3651-1Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
ISO 3651-2Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid
ISO 3887Steels - Determination of the depth of decarburization
ISO 4136Destructive tests on welds in metallic materials - Transverse tensile test
ISO 4624Paints and varnishes - Pull-off test for adhesion
ISO 4968Steel - Macrographic examination by sulphur print (Baumann method)
ISO 5173Destructive tests on welds in metallic materials - Bend tests
ISO 5178Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints
ISO 5579Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 6892-2Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature
ISO 7438Metallic materials - Bend test
ISO 8492Metallic materials - Tube - Flattening test
ISO 8502-6Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of water soluble contaminants for analysis (Bresle method)
ISO 8502-9Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts
ISO 9015-1Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints
ISO 9015-2Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints
ISO 9016Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
ISO 9017Destructive tests on welds in metallic materials - Fracture test
ISO 9018Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints
ISO 9934-1Non-destructive testing - Magnetic particle testing - Part 1: General principles
ISO 10447Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds
ISO 11127-6Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement
ISO 14270Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
ISO 14271Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
ISO 14272Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds
ISO 14273Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds
ISO 15630-1Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, rods and wire
ISO 16276-1Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing
ISO 16276-2Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing
ISO 16809Non-destructive testing - Ultrasonic thickness determination
ISO 16810Non-destructive testing - Ultrasonic testing - General principles
ISO 16823Non-destructive testing - Ultrasonic testing - Through-transmission technique
ISO 17636-1Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film
ISO 17636-2Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors
ISO 17637Non-destructive testing of welds - Visual testing of fusion-welded joints
ISO 17638Non-destructive testing of welds - Magnetic particle testing
ISO 17639Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
ISO 17640Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
ISO 17652-2Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers
ISO 17660-1Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints
ISO 17660-2Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints
ISO 22825Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
ISO 29601Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film
EN10
EN 1369Founding - Magnetic particle testing
EN 1371-1Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings
EN 1371-2Founding - Liquid penetrant testing - Part 2: Investment castings
EN 1465
EN 10160Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method)
EN 10306
EN 10308Non-destructive testing - Ultrasonic testing of steel bars
EN 12681-1
EN 13018Non-destructive testing - Visual testing - General principles
EN 13068-3
EN 10228 series3
EN 10228-1Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
EN 10228-2Non-destructive testing of steel forgings - Part 2: Penetrant testing
EN 10228-3Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings
EN 12814 series3
EN 12814-1
EN 12814-2
EN 12814-4
ISO 8503 series3
ISO 8503-2Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure
ISO 8503-4Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure
ISO 8503-5Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile
Other standards2
ASTM E1180
DIN 50602

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

19 lines
DAKKS

ISO/IEC 17025

Active

D-PL-17370-01-00

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-17370-01-01

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-17370-01-02

View scope

Location

Aachener Straße 172, Düsseldorf, 40223, DE

51.19725, 6.77064

Open in Maps
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.