Poland
Wavin Polska
ul. Dobieżyńska 43, 64-320, Buk, Poland
PCA AB 1256ISO/IEC 17025Register refreshed 2026-11-06
- Accredited standards
- 53
- PCA certificate
- 1
- Site in our directory
- 1
PCA accredited scope
What this lab is accredited for
Our reading of the PCA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 53 standard numbers and the 39 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO25
ISO 306Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
ISO 580Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating
ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 2505Thermoplastics pipes - Longitudinal reversion - Test method and parameters
ISO 3126Plastics piping systems - Plastics components - Determination of dimensions
ISO 3127Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method
ISO 3451-1Plastics - Determination of ash - Part 1: General methods
ISO 4892-1Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance and requirements
ISO 4892-3Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
ISO 9852Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method
ISO 9967Thermoplastics pipes - Determination of creep ratio
Show all 25
ISO 9969Thermoplastics pipes - Determination of ring stiffness
ISO 11173Thermoplastics pipes - Determination of resistance to external blows - Staircase method
ISO 11357-6Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 12091Structured-wall thermoplastics pipes - Oven test
ISO 13254Thermoplastics piping systems for non-pressure applications - Test method for watertightness
ISO 13255Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints
ISO 13257Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling
ISO 13259Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints
ISO 13263Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength
ISO 13264Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
ISO 13268Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness
ISO 13968Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
ISO 18553Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
EN15
EN 580
EN 727
EN 728
EN 744
EN 1053
EN 1054
EN 1055
EN 1277
EN 1411
EN 12061
EN 12256
EN 13018Non-destructive testing - Visual testing - General principles
EN 13598-2
EN 17150
EN 20105-A02
ISO 1167 series4
ISO 1167-1Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method
ISO 1167-2Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces
ISO 1167-3Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components
ISO 1167-4Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies
ISO 2507 series3
ISO 2507-1Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method
ISO 2507-2Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
ISO 2507-3Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
ISO 6259 series3
ISO 6259-1Thermoplastics pipes - Determination of tensile properties - Part 1: General test method
ISO 6259-2Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)
ISO 6259-3Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes
ISO 7724 series3
ISO 7724-1Paints and varnishes - Colorimetry - Part 1: Principles
ISO 7724-2Paints and varnishes - Colorimetry - Part 2: Colour measurement
ISO 7724-3Paints and varnishes - Colorimetry - Part 3: Calculation of colour differences
PN-EN 1053:1998; PN-EN ISO 13254:2017-11; PN-EN 1277:2005; PN-EN ISO 13259:2021-01; PN-EN 1411:1998; PN-EN ISO 11173:2017-12; PN-EN ISO 4892-1:2025-04; PN-EN ISO 4892-3:2025-04; EN ISO 1183-1:2025; PN-EN 728:1999; EN ISO 11357-6:2025; PN-EN ISO 1133-1:2022-12; PN-EN 727:1998; PN-EN ISO 306:2023-05; PN-EN ISO 2507-1:2017-11; PN-EN ISO 2507-2:2017-12; PN-EN ISO 2507-3:2017-12; ISO 18553:2025; PN-EN ISO 3451-1:2019-04; PN-EN ISO 9967:2016-02; PN-ISO 12091:2009; PN-EN 20105-A02:1996; PN-ISO 7724-1:2003; PN-ISO 7724-2:2003; PN-ISO 7724-3:2003; PN-EN 17150:2019-11; PN-EN 13598-2:2020-11
PN-EN 13018:2016-04; PN-EN ISO 3126:2006; PN-EN ISO 2505:2024-04; PN-EN ISO 1167-1:2007; PN-EN ISO 1167-2:2007; PN-EN ISO 1167-3:2008; PN-EN ISO 1167-4:2008; PN-EN ISO 6259-1:2015-05; PN-EN ISO 6259-2:2021-03; PN-EN ISO 6259-3:2015-08; PN-EN ISO 9969:2016-02; PN-EN ISO 13968:2009; PN-EN ISO 13268:2023-07; PN-EN 580:2005; PN-EN ISO 9852:2017-11; PN-EN 744:1997; PN-EN ISO 3127:2017-12; PN-EN 12061:2001; PN-EN ISO 13263:2017-12; PN-EN 12256:2001+Ap1:2002; PN-EN ISO 13264:2017-12; PN-EN ISO 580:2006; PN-EN 1055:1998; PN-EN ISO 13257:2019-01; PN-EN 1054:1998; PN-EN ISO 13255:2017-12
Read from the PCA scope document we downloaded on 2026-03-13. Register refreshed 2026-11-06.
Scope as published by PCA
3 lines
PCA
ISO/IEC 17025
ActiveAB 1256
The scope document we hold says it is valid until 2027-03-09.
Accredited scope, certificate AB 1256
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | - | rubber products; building and rubber products; building products, structural materials and products, plastics and plastic productsShow page textExtracted from the scope document; tables may not line up. View scope for the original. PCA Zakres akredytacji Nr AB 1256
Scope of accreditation No. AB 1256
ZAKRES AKREDYTACJI
LABORATORIUM BADAWCZEGO
SCOPE OF ACCREDITATION FOR TESTING LABORATORY
Nr/No. AB 1256
wydany przez / issued by
POLSKIE CENTRUM AKREDYTACJI
01-382 Warszawa, ul. Szczotkarska 42
Wydanie/Issue 20 z/of 26.11.2025
KIEROWNIK DZIAŁU AKREDYTACJI
BADAŃ MECHANICZNYCH I FIZYCZNYCH
MARIA SZAFRAN
Niniejszy dokument jest załącznikiem do Certyfikatu Akredytacji Nr AB 1256 z dnia 29.02.2020 r
Cykl akredytacji od 13.02.2023 r. do 09.03.2027 r.
Status akredytacji oraz aktualność zakresu akredytacji można potwierdzić na stronie internetowej PCA www.pca.gov.pl
This document is an annex to accreditation certificate No. AB 1256 of 29.02.2020
Accreditation cycle from 13.02.2023 to 09.03.2027
The status of accreditation and validity of the scope of accreditation can be confirmed at PCA website www.pca.gov.pl
Wydanie nr / Issue No. 20, 26.11.2025 1/ 4
Nazwa i adres / Name and address
WAVIN POLSKA S.A.
LABORATORIUM ZAKŁADOWE
ul. Dobieżyńska 43
64-320 Buk
Kod identyfikacyjny /
Identification code *) Dziedzina i przedmiot badań / Field of testing and item:
- C/21
- J/5; J/21
- N/5; N/8; N/21
- Badania chemiczne wyrobów z tworzyw sztucznych / Chemical tests of rubber products
- Badania mechaniczne wyrobów budowlanych oraz wyrobów z tworzyw sztucznych / Mechanical tests
of building and rubber products
- Badania właściwości fizycznych wyrobów budowlanych, wyrobów i materiałów konstrukcyjnych,
tworzyw sztucznych oraz wyrobów z tworzyw sztucznych / Tests of physical properties of building
products, structural materials and products, plastics and plastic products
Wersja strony/Page version: A
*) Kod identyfikacyjny zgodnie z załącznikiem do dokumentu DAB -07 dostępnym na stronie internetowej www.pca.gov.pl /
The identification code according to the Annex to document DA B-07, available at PCA website www.pca.gov.pl
AB 1256 | - |
| 2 | PN-EN 13018:2016-04; PN-EN ISO 3126:2006; PN-EN ISO 2505:2024-04; PN-EN ISO 1167-1:2007; PN-EN ISO 1167-2:2007; PN-EN ISO 1167-3:2008; PN-EN ISO 1167-4:2008; PN-EN ISO 6259-1:2015-05; PN-EN ISO 6259-2:2021-03; PN-EN ISO 6259-3:2015-08; PN-EN ISO 9969:2016-02; PN-EN ISO 13968:2009; PN-EN ISO 13268:2023-07; PN-EN 580:2005; PN-EN ISO 9852:2017-11; PN-EN 744:1997; PN-EN ISO 3127:2017-12; PN-EN 12061:2001; PN-EN ISO 13263:2017-12; PN-EN 12256:2001+Ap1:2002; PN-EN ISO 13264:2017-12; PN-EN ISO 580:2006; PN-EN 1055:1998; PN-EN ISO 13257:2019-01; PN-EN 1054:1998; PN-EN ISO 13255:2017-12 | Rury, kształtki i inne wyroby z tworzyw sztucznych; Rury i kształtki z tworzyw sztucznych; Rury z tworzyw termoplastycznych; Rury, kształtki i zestawy z termoplastycznych tworzyw sztucznych; Rury z nieplastyfikowanego polichlorku winylu; Kształtki z tworzyw termoplastycznych; Kształtki fabrykowane z tworzyw termoplastycznych; Kształtki wtryskowe z tworzyw termoplastycznych; Systemy przewodowe z tworzyw sztucznych | See scope document |
| 3 | PN-EN 1053:1998; PN-EN ISO 13254:2017-11; PN-EN 1277:2005; PN-EN ISO 13259:2021-01; PN-EN 1411:1998; PN-EN ISO 11173:2017-12; PN-EN ISO 4892-1:2025-04; PN-EN ISO 4892-3:2025-04; EN ISO 1183-1:2025; PN-EN 728:1999; EN ISO 11357-6:2025; PN-EN ISO 1133-1:2022-12; PN-EN 727:1998; PN-EN ISO 306:2023-05; PN-EN ISO 2507-1:2017-11; PN-EN ISO 2507-2:2017-12; PN-EN ISO 2507-3:2017-12; ISO 18553:2025; PN-EN ISO 3451-1:2019-04; PN-EN ISO 9967:2016-02; PN-ISO 12091:2009; PN-EN 20105-A02:1996; PN-ISO 7724-1:2003; PN-ISO 7724-2:2003; PN-ISO 7724-3:2003; PN-EN 17150:2019-11; PN-EN 13598-2:2020-11 | Systemy przewodowe z tworzyw sztucznych; Rury z tworzyw termoplastycznych; Wyroby budowlane, wyroby z tworzyw sztucznych; Tworzywa sztuczne nieporowate; Poliolefiny oraz rury i kształtki z poliolefin; Tworzywa termoplastyczne; Rury i kształtki z poliolefin; Tworzywa termoplastyczne; Rury i kształtki z tworzyw sztucznych; Rury z tworzyw termoplastycznych; Rury strukturalne z tworzyw termoplastycznych; Rury, kształtki i inne wyroby z tworzyw sztucznych; Rury, kształtki z tworzyw sztucznych, materiały i wyroby konstrukcyjne; Wyroby budowlane, wyroby z tworzyw termoplastycznych; Wyroby, materiały, obiekty budowlane, Wyroby z tworzyw sztucznych i gumy | See scope document |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Accreditation data refreshed from the PCA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the PCA entry linked above.