Registers refreshed 2026-11-08.See refresh dates
United Kingdom

Oceaneering International Services Ltd trading as Oceaneering

Oceaneering, 109 Bowesfield Lane, Stockton-on-Tees, TS18 3HF, Cleveland, United Kingdom

Visit website
UKAS 0025ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
16
UKAS certificate
1
Site in our directory
1
UKAS accredited scope

What this lab is accredited for

Our reading of the UKAS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 16 standard numbers and the 16 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO15
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 4136Destructive tests on welds in metallic materials - Transverse tensile test
ISO 5173Destructive tests on welds in metallic materials - Bend tests
ISO 5178Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 7438Metallic materials - Bend test
ISO 9015-1Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints
ISO 9016Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
ISO 9017Destructive tests on welds in metallic materials - Fracture test
ISO 9606-1Qualification testing of welders - Fusion welding - Part 1: Steels
ISO 9606-2Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys
ISO 15614-1Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
ISO 15614-2Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys
ISO 17639Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
Other standards1
ASTM E92Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials

Read from the scope as published by UKAS. Register refreshed 2026-11-06.

Scope as published by UKAS

1 line
UKAS

ISO/IEC 17025

Active

0025

View scope

Accredited scope, certificate 0025

LineMethodMatrixRange
1BS EN ISO 6892-1:2019 Method B Bend BS EN ISO 7438:2020; BS EN ISO 148-1:2016; BS EN ISO 6507-1:2023 ASTM E92-23; BS EN ISO 9016:2022 BS EN ISO 5178:2019 BS EN ISO 4136:2022 BS EN ISO 5173:2023 BS EN ISO 9015-1:2011 BS EN ISO 9017:2018 BS EN ISO 17639:2022 BS EN ISO 9606-1:2017 BS EN ISO 9606-2:2004 BS EN ISO 15614-1:2017; BS EN ISO 15614-2:2005 ASME BPVC IX:2023 AWS D1FERROUS and NON-FERROUS CASTINGS, FORGINGS, PLATE, WELDMENTS; Weldments, Steels and Aluminium Alloys-196 to °C

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Oceaneering, 109 Bowesfield Lane, Stockton-on-Tees, Cleveland, TS18 3HF, GB

54.54885, -1.31717

Open in Maps
← All accredited testing labs in United Kingdom

Labs with overlapping accredited scope in United Kingdom

Accreditation data refreshed from the UKAS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the UKAS entry linked above.