Poland

Veolia Energia Warszawa

ul. Siemieńskiego 4, 02-106, Warszawa, Poland

PCA AB 414ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 29
PCA certificate: 1
Site in our directory: 1

PCA accredited scope

What this lab is accredited for

Our reading of the PCA scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 29 standard numbers and the 20 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO20

ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles

ISO 844Rigid cellular plastics - Determination of compressive properties

ISO 845Cellular plastics and rubbers - Determination of apparent density

ISO 1798Flexible cellular polymeric materials - Determination of tensile strength and elongation at break

ISO 1856Flexible cellular polymeric materials - Determination of compression set

ISO 1923Cellular plastics and rubbers - Determination of linear dimensions

ISO 2896Rigid cellular plastics - Determination of water absorption

ISO 3386-1Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 1: Low-density materials

ISO 4590Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells

ISO 6259-1Thermoplastics pipes - Determination of tensile properties - Part 1: General test method

ISO 6259-3Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes

ISO 8301Thermal insulation - Determination of steady-state thermal resistance and related properties - Heat flow meter apparatus

Show all 20

ISO 8497Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes

ISO 10147Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content

ISO 12628Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation

ISO 12667Commercial vehicles and buses - Cross-tooth propeller shaft flanges, type T

ISO 16770Plastics - Determination of environmental stress cracking (ESC) of polyethylene - Full-notch creep test (FNCT)

ISO 18096Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation

ISO 18098Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation

ISO 29469Thermal insulating products for building applications - Determination of compression behaviour

EN9

EN 253

EN 448

EN 489-1

EN 579

EN 1602

EN 12814-1

EN 13941-1

EN 15698-1

EN 17415-1

Read from the PCA scope document we downloaded on 2026-03-13. Register refreshed 2026-11-06.

Scope as published by PCA

7 lines

PCA

ISO/IEC 17025

Active

AB 414

The scope document we hold says it is valid until 2027-02-11.

View on PCA

Accredited scope, certificate AB 414

Line	Method	Matrix	Range
1	-	structural materials and products; plastic products Show page text Extracted from the scope document; tables may not line up. View scope for the original. PCA Zakres akredytacji Nr AB 414 Scope of accreditation No. AB 414 ZAKRES AKREDYTACJI LABORATORIUM BADAWCZEGO SCOPE OF ACCREDITATION FOR TESTING LABORATORY Nr/No. AB 414 wydany przez / issued by POLSKIE CENTRUM AKREDYTACJI 01-382 Warszawa, ul. Szczotkarska 42 Wydanie/Issue 24 z/of 18.12.2025 KIEROWNIK DZIAŁU AKREDYTACJI BADAŃ MECHANICZNYCH I FIZYCZNYCH MARIA SZAFRAN Niniejszy dokument jest załącznikiem do Certyfikatu Akredytacji Nr AB 414 z dnia 23.12.2019 r. Cykl akredytacji od 12.01.2023 r. do 11.02.2027 r. Status akredytacji oraz aktualność zakresu akredytacji można potwierdzić na stronie internetowej PCA www.pca.gov.pl This document is an annex to accreditation certificate No. AB 414 of 23.12.2019 Accreditation cycle from 12.01.2023 to 11.02.2027 The status of accreditation and validity of the scope of accreditation can be confirmed at PCA website www.pca.gov.pl Wydanie nr / Issue No. 24, 18.12.2025 1/8 Nazwa i adres / Name and address VEOLIA ENERGIA WARSZAWA S.A. ul. Batorego 2 02-591 Warszawa LABORATORIUM BADAWCZE ul. Siemieńskiego 4 02-106 Warszawa Kod identyfikacyjny / Identification code ) Dziedzina i przedmiot badań / Field of testing and item: - J/8; J/21 - N/8; N/21 - C/21 - Badania mechaniczne wyrobów i materiałów konstrukcyjnych, wyrobów z tworzyw sztucznych / Mechanical tests of structural materials and products, plastic products - Badania właściwości fizycznych wyrobów i materiałów konstrukcyjnych, wyrobów z tworzyw sztucznych / Physical properties tests of structural materials and products, plastic products - Badania chemiczne wyrobów z tworzyw sztucznych / Chemical tests of plastic products Wersja strony/Page version: A ) Kod identyfikacyjny zgodnie z załącznikiem do dokumentu DAB -07 dostępnym na stronie internetowej www.pca.gov.pl / The identification code according to the Annex to document DAB-07, available at PCA website www.pca.gov.pl AB 414	-
2	PN-EN 253; EN 253	Rury preizolowane pojedyncze do budowy wodnych sieci ciepłowniczych	to 10 mm
3	PN-EN 489-1; EN 489-1; PN-EN 17415-1; EN 17415-1	Zespół złącza preizolowanego (rury preizolowane pojedyncze i podwójne); Rury preizolowane pojedyncze do budowy wodnych sieci chłodu systemowego	to 10 kN
4	PN-EN 448; EN 448	Kształtki preizolowane	to 10 kN
5	PN-EN 15698-1; EN 15698-1	Rury preizolowane podwójne do budowy wodnych sieci ciepłowniczych	to 2 mm
6	PN-EN ISO 8497; PN-ISO 8301; PN-EN ISO 845; PN-EN 1602; PN-EN ISO 18098; PN-EN ISO 29469; PN-EN ISO 844; PN-EN ISO 4590; PN-EN 253; EN 253; PB-01; PN-EN ISO 3386-1; PN-EN 13941-1; PN-EN ISO 1856; ISO 1856; PN-EN 13941-1; PN-EN ISO 1923; PN-93/C-89084; ISO 2896; PN-EN 12814-1; ISO 16770; PN-EN ISO 527-1; IB-SB-19-1; IB-SB-19-2	Wyroby włókniste; Tworzywa sztuczne porowate; Tworzywa sztuczne termoplastyczne; Kaptur końcowy termokurczliwy	to 0.08 W/mK
7	PN-EN ISO 10147:2013-06; PN-EN 579:2001; PN-EN ISO 6259-1:2015-05; PN-EN ISO 6259-3:2015-08; PN-EN ISO 12628:2023-02; PN-EN ISO 18096:2023-02; PN-EN ISO 29469:2023-05; PN-EN ISO 12667:2002; PN-EN ISO 1798:2009; PN-EN 253+A2:2015-12	Tworzywa sztuczne termoplastyczne; Wyroby włókniste; Tworzywa sztuczne porowate; Rury preizolowane pojedyncze do budowy wodnych sieci ciepłowniczych	to 0.08 W/mK

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

ul. Siemieńskiego 4, Warszawa, 02-106, PL

52.23337, 21.07115

Open in Maps

← All accredited testing labs in Poland

Accreditation data refreshed from the PCA register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the PCA entry linked above.