Registers refreshed 2026-11-08.See refresh dates
Italy

T&A Tecnologia & Ambiente

Via M. Mummolo 13, 70017, Putignano, Italy

Visit website
ACCREDIA 01376ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
42
ACCREDIA certificate
1
Site in our directory
1
ACCREDIA accredited scope

What this lab is accredited for

Our reading of the ACCREDIA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 42 standard numbers and the 29 official names we hold. When no standard matches, it searches the method text of every scope line.

EN14
EN 12048
EN 12341Exclusion

Limits written next to it

UNI EN 12341:2023 - escluso/except

Exclusion. Written next to it on line 5 of ACCREDIA certificate 01376.

EN 12457-2Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
EN 12619Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
EN 13137Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments
EN 13284-1Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
EN 13725
EN 14039Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography
EN 14346Characterization of waste - Calculation of dry matter by determination of dry residue or water content
EN 14789Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
EN 14790Stationary source emissions - Determination of the water vapour in ducts - Standard reference method
EN 14791Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
EN 14792Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: Chemiluminescence
EN 15058Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry
EPA13
EPA 1613
EPA 1668
EPA 3050
EPA 3510Separatory Funnel Liquid-Liquid Extraction
EPA 3545
EPA 3546
EPA 5021Volatile Organic Compounds (VOCs) in Various Sample Matrices Using Equilibrium Headspace Analysis
EPA 5035
EPA 6010Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES)
EPA 8015Nonhalogenated Organics by Gas Chromatography
EPA 8260Volatile Organic Compounds by Gas Chromatography/Mass Spectrometry
EPA 8270Semivolatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC/MS)
EPA 8280
ISO12
ISO 9377-2Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography
ISO 10304-1Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
ISO 10523Water quality - Determination of pH
ISO 14402Water quality - Determination of phenol index by flow analysis (FIA and CFA)
ISO 14403-2Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA)
ISO 15192Soil and waste - Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection
ISO 15705Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed-tube method
ISO 16703Soil quality - Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
ISO 16911-1Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method
ISO 17294-2Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes
ISO 17380Soil quality - Determination of total cyanide and easily liberatable cyanide - Continuous-flow analysis method
ISO 23913Water quality - Determination of chromium(VI) - Method using flow analysis (FIA and CFA) and spectrometric detection
Other standards3
APAT CNR IRSA 2090 B Man 29 2003
APAT CNR IRSA 7030 F Man 29 2003
DM 13/09/1999 SO n 185 GU n 248 21/10/1999 Met II.1

Read from the scope as published by ACCREDIA. Register refreshed 2026-11-06.

Scope as published by ACCREDIA

11 lines
ACCREDIA

ISO/IEC 17025

Active

01376

View scope

Location

Via M. Mummolo 13, Putignano, 70017, IT

40.84920, 17.12264

Open in Maps
← All accredited testing labs in Italy

Labs with overlapping accredited scope in Italy

Accreditation data refreshed from the ACCREDIA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ACCREDIA entry linked above.