CeramTec GmbH Zentrale Labore
CeramTec-Platz 1-9, 73207, Plochingen, Germany
Visit website- Accredited standards
- 55
- DAKKS certificates
- 5
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 55 standard numbers and the 36 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO29
ISO 806Aluminium oxide primarily used for the production of aluminium - Determination of loss of mass at 300 degrees C and 1 000 degrees C
ISO 1927-2Monolithic (unshaped) refractory products - Part 2: Sampling for testing
ISO 3675Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method
ISO 6474-1Implants for surgery - Ceramic materials - Part 1: Ceramic materials based on high purity alumina
ISO 6474-2Implants for surgery - Ceramic materials - Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement
ISO 10523Water quality - Determination of pH
ISO 11491Implants for surgery - Determination of impact resistance of ceramic femoral heads for hip joint prostheses
ISO 11664-3Colorimetry - Part 3: CIE tristimulus values
ISO 11664-4Colorimetry - Part 4: CIE 1976 L*a*b* Colour space
ISO 12677Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method
ISO 13320Particle size analysis - Laser diffraction methods
ISO 13356Implants for surgery - Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)
Show all 29
ISO 13383-1Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution
ISO 14627Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture resistance of silicon nitride materials for rolling bearing balls at room temperature by indentation fracture (IF) method
ISO 14704Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature
ISO 14705Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature
ISO 14801Dentistry - Implants - Dynamic loading test for endosseous dental implants
ISO 15632Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA)
ISO 15732Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method
ISO 17167Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of monolithic ceramics at room temperature - Determination of flexural strength by the ring-on-ring test
ISO 17172Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of compaction properties of ceramic powders
ISO 17562Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear thermal expansion of monolithic ceramics by push-rod technique
ISO 18754Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of density and apparent porosity
ISO 18757Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method
ISO 20501Fine ceramics (advanced ceramics, advanced technical ceramics) - Weibull statistics for strength data
ISO 22214Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for cyclic bending fatigue of monolithic ceramics at room temperature
ISO 22309Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
ISO 23145-2Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density
ISO 23146Fine ceramics (advanced ceramics, advanced technical ceramics) - Test methods for fracture toughness of monolithic ceramics - Single-edge V-notch beam (SEVNB) method
DIN7
DIN 51001
DIN 51061
DIN 51081
DIN 51082
DIN 51423-2
DIN 66165-1
DIN 66165-2
ASTM6
ASTM C1322
ASTM C1499
ASTM D1747
ASTM F1820Standard Test Method for Determining the Forces for Disassembly of Modular Acetabular Devices
ASTM F2009Standard Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses
ASTM F2345Standard Test Methods for Determination of Cyclic Fatigue Strength of Ceramic Modular Femoral Heads
EN6
EN 725-5
EN 1071-4
EN 12048
EN 13925-1
EN 13925-2
EN 27888Water quality - Determination of electrical conductivity
EN 843 series4
EN 843-1
EN 843-2
EN 843-3
EN 843-6
ISO 7206 series3
ISO 7206-10Implants for surgery - Partial and total hip-joint prostheses - Part 10: Determination of resistance to static load of modular femoral heads
ISO 7206-12Implants for surgery - Partial and total hip joint prostheses - Part 12: Deformation test method for press-fit acetabular components
ISO 7206-13Implants for surgery - Partial and total hip joint prostheses - Part 13: Determination of resistance to torque of head fixation of stemmed femoral components
DIN EN ISO 17562; ISO 17562; DIN EN ISO 11664-3; DIN EN ISO 11664-4; DIN 51423-2; ASTM D1747; DIN EN 12048; DIN 51081; ISO 806; DIN EN 13925-1; DIN EN 13925-2
DIN EN ISO 1927-2; DIN 51001 Beiblatt 1; DIN 51061; DIN EN ISO 12677; DIN 51001; DIN 51082; DIN EN ISO 10523
ISO 22214; DIN EN ISO 13383-1; DIN EN 1071-4; ISO 15632; ISO 22309; DIN EN 725-5; DIN 66165-1; DIN 66165-2; ISO 13320; DIN EN ISO 3675; DIN EN ISO 17172; DIN EN ISO 18757; DIN EN ISO 23145-2; ISO 18754
ISO 7206-10; ISO 7206-13; ASTM F1820; ASTM F2009; ASTM F2345; ISO 11491; ISO 7206-12; ISO 6474-1
DIN EN ISO 12677:2013-02; DIN EN ISO 13356:2016-02; DIN EN ISO 14801:2017-03; ISO 6474-1:2019-03; ISO 6474-2:2019-03; ISO 7206-10:2018-08; ISO 7206-12:2016-10; ISO 7206-13:2016-07; ISO 11491:2017-07; ASTM F1820-13; ASTM F2009-20; ASTM F2345-03:2013
ISO 6474-2; DIN EN ISO 13356; DIN EN ISO 14801
DIN EN 843-1; DIN EN 843-3; DIN EN 843-6; DIN ISO 17167; ISO 14704; ISO 20501; ASTM C1322; ASTM C1499; DIN EN ISO 14705; DIN EN ISO 15732; DIN ISO 23146; ISO 14627; DIN EN 843-2
DIN EN 27888
Read from the scope as published by DAKKS. Register refreshed 2026-11-06.
Scope as published by DAKKS
24 lines
ISO/IEC 17025
ActiveD-PL-18721-01-00
ISO/IEC 17025
WithdrawnD-PL-18721-01-01
ISO/IEC 17025
ActiveD-PL-18721-01-02
ISO/IEC 17025
WithdrawnD-PL-18721-01-03
ISO/IEC 17025
ActiveD-PL-18721-02-00
ISO/IEC 17025
ActiveD-PL-18721-02-01
ISO/IEC 17025
ActiveD-PL-18721-02-02
Location
Labs with overlapping accredited scope in Germany
- SGS Analytics GermanyFellbach · ~16 kmDAKKSShares 3 accredited test methodsEN 27888EN ISO 10523EN ISO 9001
- Limbach AnalyticsMannheim · ~101 kmDAKKSShares 3 accredited test methodsEN 27888EN ISO 10523EN ISO 9001
- Chemlab Gesellschaft für Analytik und Umweltberatung mbHBensheim · ~123 kmDAKKSShares 3 accredited test methodsEN 27888EN ISO 10523EN ISO 9001
- CLG Chemisches Labor Dr. Graser KGSchonungen · ~161 kmDAKKSShares 3 accredited test methodsEN 27888EN ISO 10523EN ISO 9001
- Dr. Marx GmbH material testing and consultingSpiesen-Elversberg · ~179 kmDAKKSShares 3 accredited test methodsEN 27888EN ISO 10523EN ISO 9001
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.