GETEC PARK.EMMEN
Eerste Bokslootweg 17, 7821 AT, EMMEN, Netherlands
- Accredited standards
- 13
- RvA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the RvA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 13 standard numbers and the 11 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO8
ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 1133-2Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
ISO 1183-3Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method
ISO 11357-1Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
ISO 14966Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
ISO 15033Plastics - Determination of caprolactam and its cyclic and linear oligomers by HPLCSome methods
Limits written next to it
ISO 15033 method B
ISO 15033 method B Emm
ISO 15512Plastics - Determination of water contentSome methods
Limits written next to it
ISO 15512 method C
ISO 15512 method C Emm
ISO 16000-27Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
ISO 3451 series3
ISO 3451-1Plastics - Determination of ash - Part 1: General methods
ISO 3451-2Plastics - Determination of ash - Part 2: Poly(alkylene terephthalate) materials
ISO 3451-4Plastics - Determination of ash - Part 4: Polyamides
Other standards2
NEN 2990
NEN 5896
ISO 14966; ISO 16000-27; MDHS 14/4; ISO 1133-1; ISO 1133-2; AG 315; ISO 3451-1; ISO 3451-2; ISO 3451-4; AP 333; AP 332; AP 337; AV361; ISO 15512 method C
ISO 15033 method B; AM 349 eigen methode; ISO 1183-3; ISO 11357-1, -3
NEN 5896; NEN 2990:2020+C1:2020 + A1:2025
Read from the RvA scope document we downloaded on 2026-09-27. Register refreshed 2026-11-08.
Scope as published by RvA
3 lines
ISO/IEC 17025
ActiveL328
The scope document we hold says it is valid until 2030-07-01.
Accredited scope, certificate L328
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | NEN 5896; NEN 2990:2020+C1:2020 + A1:2025 | Asbest verdachte materialen; Lucht | - |
| 2 | ISO 14966; ISO 16000-27; MDHS 14/4; ISO 1133-1; ISO 1133-2; AG 315; ISO 3451-1; ISO 3451-2; ISO 3451-4; AP 333; AP 332; AP 337; AV361; ISO 15512 method C | Lucht; Stof, kleefmonsters; Kunststof (thermoplasten); Kunststof PA, PBT en PET (en co-polymeren van beide); Kunststof PA6 + PA66; Kunststof PET + PBT + rubberachtigen; Kunststof PET; Niet roet- of titaan-houdende polymeren | - |
| 3 | ISO 15033 method B; AM 349 eigen methode; ISO 1183-3; ISO 11357-1, -3 | PA-6; Polyamide; Kunststof (niet-cellulaire plastics); Kunststof | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in Netherlands
Accreditation data refreshed from the RvA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the RvA entry linked above.