Registers refreshed 2026-11-08.See refresh dates
France

CETIM MAROC

France

COFRAC 1-5383ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
16
COFRAC certificate
1
Site in our directory
1
COFRAC accredited scope

What this lab is accredited for

Our reading of the COFRAC scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 16 standard numbers and the 7 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM7
ASTM E8Standard Test Methods for Tension Testing of Metallic Materials
ASTM E21Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E112Standard Test Methods for Determining Average Grain Size
ASTM E139
ASTM E466
ASTM E606
ASTM E1447
ISO4
ISO 204Metallic materials - Uniaxial creep testing in tension - Method of test
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 6892-2Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature
EN 2002 series3
EN 2002-001
EN 2002-002
EN 2002-005
Other standards2
EN 15305
NF A03-403

Read from the scope as published by COFRAC. Register refreshed 2026-11-06.

Scope as published by COFRAC

5 lines
COFRAC

ISO/IEC 17025

Active

1-5383

View scope

Accredited scope, certificate 1-5383

LineMethodMatrixRange
1-Metal
Show page text

Extracted from the scope document; tables may not line up. View scope for the original.

Convention N° 4964 LAB FORM 37 – Révision 10 – applicable au 1er juillet 2025 Page 1/7 Section Laboratoires ATTESTATION D’ACCREDITATION ACCREDITATION CERTIFICATE N° 1-5383 rév. 14 Le Comité Français d'Accréditation (Cofrac) atteste que : The French Committee for Accreditation (Cofrac) certifies that: CM DEVELOPPEMENT Satisfait aux exigences de la norme NF EN ISO/IEC 17025 : 2017 Fulfils the requirements of the standard et aux règles d’application du Cofrac pour les activités d’analyses/essais/étalonnages en : and Cofrac rules of application for the activities of testing/calibration in : MATERIAUX / MATERIAUX METALLIQUES MATERIALS / METALLIC MATERIALS réalisées par / performed by : CETIM MAROC AEROPOLE DE NOUASSER AEROPORT MOHAMMED V CASABLANCA MAROC et précisément décrites dans l’annexe technique jointe, à l’exclusion des activités réalisées dans les pays listés dans le document GEN INF 16, dont la version en vigueur est disponible sur le site internet du Cofrac (www.cofrac.fr). and precisely described in the attached technical appendix , excluding activities performed in the countries listed in the document GEN INF 16, the current version of which is available on our website (www.cofrac.fr). L’accréditation suivant la norme internationale homologuée NF EN ISO/IEC 17025 est la preuve de la compétence technique du laboratoire dans un domaine d’activités clairement défini et du bon fonctionnement dans ce laboratoire d’un système de management adapté (cf. communiqué conjoint ISO- ILAC-IAF en vigueur disponible sur le site internet du Cofrac www.cofrac.fr) Accreditation in accordance with the recognised international standard NF EN ISO/IEC 17025 demonstrates the technical competence of the laboratory for a defined scope and the proper operation in this laboratory of an appropriate management system (see current Joint ISO -ILAC-IAF Communiqué available on Cofrac web site www.cofrac.fr) . Le Cofrac est signataire de l’accord multilatéral d’EA pour l’accréditation , pour les activités objets de la présente attestation. Cofrac is signatory of the European co -operation for Accreditation (EA) Multilateral Agreement for accreditation for the activities covered by this certificate.
-
2

Extracted from the scope document; tables may not line up. View scope for the original.

LAB FORM 37 – Révision 10 – applicable au 1er juillet 2025 Page 3/7 Section Laboratoires ANNEXE TECHNIQUE à l’attestation N° 1-5383 rév. 14 L’accréditation concerne les prestations réalisées par : CETIM MAROC AEROPOLE DE NOUASSER AEROPORT MOHAMMED V CASABLANCA MAROC Dans son unité : - Analyses métallurgiques - Essais mécaniques Elle porte sur : voir pages suivantes
3ASTM E8/E8M; NF EN ISO 6892-1; NF EN 2002-001; ASTM E21; NF EN ISO 6892-2; NF EN 2002-002; NF EN ISO 6507-1; NF EN ISO 204; ASTM E139; NF EN 2002-005Metalto 900 °C
4NF A 03-403 - 1990; ASTM E606; ASTM E466Metalto 900 °C
5ASTM E112; ASTM E1447; NF EN 15305Metal-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

← All accredited testing labs in France

Labs with overlapping accredited scope in France

Accreditation data refreshed from the COFRAC register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the COFRAC entry linked above.