Germany

Technologie-Zentrum für Oberflächentechnik und Umweltschutz Leipzig GmbH Labor für Umwelterprobung und Werkstoffprüfung

Hornstraße 5, 04249, Leipzig, Germany

DAKKS|D-PL-11034-01-00DAKKS|D-PL-11034-01-01DAKKS|D-PL-11034-01-02ISO/IEC 17025Register refreshed 2026-09-25

Certificates

Scope items

Standards

Locations

Free. We check which accredited labs can do it, starting with this one, and reply within two working days with who can do it, how fast, and roughly what it costs.

Only the laboratory you pick gets your contact details. We ask the others without them.

Contact this laboratory

Visit website Open DAKKS register entry

Work at Technologie-Zentrum für Oberflächentechnik und Umweltschutz Leipzig GmbH Labor für Umwelterprobung und Werkstoffprüfung?

Claim this profile to keep it accurate.

Register record

DAKKSRefreshed 2026-09-25: D-PL-11034-01-00Active; D-PL-11034-01-01Active; D-PL-11034-01-02Active

Accredited standards

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it. Click a standard to see the scope line it comes from, word for word.

ISO

ISO 34-1Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces

As written on the certificate · Line 10 (DAKKS D-PL-11034-01-01)

BMW GS 95024 -3-1; MBN LV 124 -2; VW 80000; DIN EN ISO 527 -1; DIN EN ISO 527 -2; DIN EN ISO 527 -3; DIN EN ISO 1798; DIN EN ISO 604; DIN EN ISO 3386 -1; DIN EN ISO 3386 -2; DIN EN ISO 178; DIN EN ISO 14125; DIN 55543 -5; DIN EN 1464; DIN ISO 34 -1

As written on the certificate · Line 11 (DAKKS D-PL-11034-01-01)

DIN EN ISO 604; DIN EN ISO 3386-1; DIN EN ISO 3386-2; DIN EN ISO 178; DIN EN ISO 14125; DIN 55543-5; DIN EN 1464; DIN ISO 34-1; DIN EN ISO 868; DIN ISO 48-4; DIN EN ISO 179-1; DIN EN ISO 180

ISO 48-4Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)

As written on the certificate · Line 11 (DAKKS D-PL-11034-01-01)

DIN EN ISO 604; DIN EN ISO 3386-1; DIN EN ISO 3386-2; DIN EN ISO 178; DIN EN ISO 14125; DIN 55543-5; DIN EN 1464; DIN ISO 34-1; DIN EN ISO 868; DIN ISO 48-4; DIN EN ISO 179-1; DIN EN ISO 180

ISO 62Plastics - Determination of water absorption

As written on the certificate · Line 12 (DAKKS D-PL-11034-01-01)

DIN EN ISO 8256; DIN 53435; DIN 53370; DIN ISO 4593; DIN ISO 815 -1; DIN EN ISO 1856; DIN EN ISO 62; DIN EN ISO 845; DIN EN ISO 1172; DIN EN ISO 1183 -1; DIN EN ISO 3451 -1

ISO 178Plastics - Determination of flexural properties

As written on the certificate · Line 10 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 11 (DAKKS D-PL-11034-01-01)

DIN EN ISO 604; DIN EN ISO 3386-1; DIN EN ISO 3386-2; DIN EN ISO 178; DIN EN ISO 14125; DIN 55543-5; DIN EN 1464; DIN ISO 34-1; DIN EN ISO 868; DIN ISO 48-4; DIN EN ISO 179-1; DIN EN ISO 180

ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test

As written on the certificate · Line 11 (DAKKS D-PL-11034-01-01)

DIN EN ISO 604; DIN EN ISO 3386-1; DIN EN ISO 3386-2; DIN EN ISO 178; DIN EN ISO 14125; DIN 55543-5; DIN EN 1464; DIN ISO 34-1; DIN EN ISO 868; DIN ISO 48-4; DIN EN ISO 179-1; DIN EN ISO 180

ISO 180Plastics - Determination of Izod impact strength

As written on the certificate · Line 11 (DAKKS D-PL-11034-01-01)

DIN EN ISO 604; DIN EN ISO 3386-1; DIN EN ISO 3386-2; DIN EN ISO 178; DIN EN ISO 14125; DIN 55543-5; DIN EN 1464; DIN ISO 34-1; DIN EN ISO 868; DIN ISO 48-4; DIN EN ISO 179-1; DIN EN ISO 180

ISO 307Plastics - Polyamides - Determination of viscosity number

As written on the certificate · Line 13 (DAKKS D-PL-11034-01-01)

DIN EN ISO 1183 -1; DIN EN ISO 3451 -1; DIN EN ISO 307; DIN EN ISO 1133 -1; DIN EN ISO 1133 -2; DIN EN ISO 1628 -2; ISO 1628 -4; DIN EN ISO 1628 -5; ISO 1628 -6

ISO 604Plastics - Determination of compressive properties

As written on the certificate · Line 10 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 11 (DAKKS D-PL-11034-01-01)

DIN EN ISO 604; DIN EN ISO 3386-1; DIN EN ISO 3386-2; DIN EN ISO 178; DIN EN ISO 14125; DIN 55543-5; DIN EN 1464; DIN ISO 34-1; DIN EN ISO 868; DIN ISO 48-4; DIN EN ISO 179-1; DIN EN ISO 180

ISO 815-1Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures

As written on the certificate · Line 12 (DAKKS D-PL-11034-01-01)

DIN EN ISO 8256; DIN 53435; DIN 53370; DIN ISO 4593; DIN ISO 815 -1; DIN EN ISO 1856; DIN EN ISO 62; DIN EN ISO 845; DIN EN ISO 1172; DIN EN ISO 1183 -1; DIN EN ISO 3451 -1

ISO 845Cellular plastics and rubbers - Determination of apparent density

As written on the certificate · Line 12 (DAKKS D-PL-11034-01-01)

DIN EN ISO 8256; DIN 53435; DIN 53370; DIN ISO 4593; DIN ISO 815 -1; DIN EN ISO 1856; DIN EN ISO 62; DIN EN ISO 845; DIN EN ISO 1172; DIN EN ISO 1183 -1; DIN EN ISO 3451 -1

ISO 846Plastics - Evaluation of the action of microorganisms

As written on the certificate · Line 8 (DAKKS D-PL-11034-01-01)

IEC 61373:2010; DIN EN 61373; [VDE 0115-106]; IEC 60529:1989 + A1:1999 + A2:2013; DIN EN 60529; ISO 20653; 2023-08; DIN 40050 -9; 1993-05; DIN EN 60068 -2-10; DIN EN ISO 846; DIN ISO 9022-11; RTCA DO -160 D bis G; MIL -STD-810 E bis G; IEC 60068 -2-10:2005 + A1:2018; DIN EN 60068-2-10; 2006-03

As written on the certificate · Line 9 (DAKKS D-PL-11034-01-01)

DIN EN ISO 846; DIN ISO 9022-11; RTCA DO -160 D bis G; MIL -STD -810 E bis G; DIN EN ISO 2409; DIN EN ISO 3497; DIN EN ISO 2812 -1; DIN EN ISO 2812 -2; ISO 16750 -5; BMW GS 95003 -5; BMW GS 95011 -4

As written on the certificate · Line 3 (DAKKS D-PL-11034-01-00)

IEC 60068-2-6; DIN EN 60068-2-64; DIN EN 60068-2-27; DIN EN 60068-2-53; DIN EN 60068-2-31; DIN EN 60068-2-80; ISO 16750-3; DIN EN 60529; ISO 20653; DIN EN 60068-2-10; DIN EN ISO 846; MIL-STD-810 E-G, Methode 508.6

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-00)

DIN EN ISO 846; DIN ISO 9022 -11; ISO 16750 -3; ISO 16750 -4; ISO 16750 -5; IEC 61373:2010; DIN EN 61373; DIN EN 50155; IEC 60068 -2-1:2007; DIN EN 60068 -2-1; IEC 60068 -2-2:2007; DIN EN 60068 -2-2; IEC 60068 -2-6:2007; DIN EN 60068 -2-6

ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)

As written on the certificate · Line 11 (DAKKS D-PL-11034-01-01)

DIN EN ISO 604; DIN EN ISO 3386-1; DIN EN ISO 3386-2; DIN EN ISO 178; DIN EN ISO 14125; DIN 55543-5; DIN EN 1464; DIN ISO 34-1; DIN EN ISO 868; DIN ISO 48-4; DIN EN ISO 179-1; DIN EN ISO 180

ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method

As written on the certificate · Line 13 (DAKKS D-PL-11034-01-01)

DIN EN ISO 1183 -1; DIN EN ISO 3451 -1; DIN EN ISO 307; DIN EN ISO 1133 -1; DIN EN ISO 1133 -2; DIN EN ISO 1628 -2; ISO 1628 -4; DIN EN ISO 1628 -5; ISO 1628 -6

ISO 1133-2Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture

As written on the certificate · Line 13 (DAKKS D-PL-11034-01-01)

DIN EN ISO 1183 -1; DIN EN ISO 3451 -1; DIN EN ISO 307; DIN EN ISO 1133 -1; DIN EN ISO 1133 -2; DIN EN ISO 1628 -2; ISO 1628 -4; DIN EN ISO 1628 -5; ISO 1628 -6

ISO 1172Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content using calcination methods

As written on the certificate · Line 12 (DAKKS D-PL-11034-01-01)

DIN EN ISO 8256; DIN 53435; DIN 53370; DIN ISO 4593; DIN ISO 815 -1; DIN EN ISO 1856; DIN EN ISO 62; DIN EN ISO 845; DIN EN ISO 1172; DIN EN ISO 1183 -1; DIN EN ISO 3451 -1

ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method

As written on the certificate · Line 12 (DAKKS D-PL-11034-01-01)

DIN EN ISO 8256; DIN 53435; DIN 53370; DIN ISO 4593; DIN ISO 815 -1; DIN EN ISO 1856; DIN EN ISO 62; DIN EN ISO 845; DIN EN ISO 1172; DIN EN ISO 1183 -1; DIN EN ISO 3451 -1

As written on the certificate · Line 13 (DAKKS D-PL-11034-01-01)

DIN EN ISO 1183 -1; DIN EN ISO 3451 -1; DIN EN ISO 307; DIN EN ISO 1133 -1; DIN EN ISO 1133 -2; DIN EN ISO 1628 -2; ISO 1628 -4; DIN EN ISO 1628 -5; ISO 1628 -6

ISO 1798Flexible cellular polymeric materials - Determination of tensile strength and elongation at break

As written on the certificate · Line 10 (DAKKS D-PL-11034-01-01)

ISO 1856Flexible cellular polymeric materials - Determination of compression set

As written on the certificate · Line 12 (DAKKS D-PL-11034-01-01)

DIN EN ISO 8256; DIN 53435; DIN 53370; DIN ISO 4593; DIN ISO 815 -1; DIN EN ISO 1856; DIN EN ISO 62; DIN EN ISO 845; DIN EN ISO 1172; DIN EN ISO 1183 -1; DIN EN ISO 3451 -1

ISO 2409Paints and varnishes - Cross-cut test

As written on the certificate · Line 9 (DAKKS D-PL-11034-01-01)

DIN EN ISO 846; DIN ISO 9022-11; RTCA DO -160 D bis G; MIL -STD -810 E bis G; DIN EN ISO 2409; DIN EN ISO 3497; DIN EN ISO 2812 -1; DIN EN ISO 2812 -2; ISO 16750 -5; BMW GS 95003 -5; BMW GS 95011 -4

As written on the certificate · Line 8 (DAKKS D-PL-11034-01-00)

VW 80000; ISO 2409:2020; DIN EN ISO 2409; ISO 2812 -1:2017; DIN EN ISO 2812-1; ISO 2812 -2:2018; DIN EN ISO 2812-2; ISO 3497:2000; DIN EN ISO 3497; ISO 6270 -2:2017; DIN EN ISO 6270-2; ISO 6988:1985; DIN EN ISO 6988; ISO 9227:2017; DIN EN ISO 9227; DIN 50018; Liefervorschrift LV 124

ISO 2812-1Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water

As written on the certificate · Line 9 (DAKKS D-PL-11034-01-01)

DIN EN ISO 846; DIN ISO 9022-11; RTCA DO -160 D bis G; MIL -STD -810 E bis G; DIN EN ISO 2409; DIN EN ISO 3497; DIN EN ISO 2812 -1; DIN EN ISO 2812 -2; ISO 16750 -5; BMW GS 95003 -5; BMW GS 95011 -4

As written on the certificate · Line 8 (DAKKS D-PL-11034-01-00)

ISO 2812-2Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method

As written on the certificate · Line 9 (DAKKS D-PL-11034-01-01)

DIN EN ISO 846; DIN ISO 9022-11; RTCA DO -160 D bis G; MIL -STD -810 E bis G; DIN EN ISO 2409; DIN EN ISO 3497; DIN EN ISO 2812 -1; DIN EN ISO 2812 -2; ISO 16750 -5; BMW GS 95003 -5; BMW GS 95011 -4

As written on the certificate · Line 8 (DAKKS D-PL-11034-01-00)

ISO 2813Paints and varnishes - Determination of gloss value at 20°, 60° and 85°

As written on the certificate · Line 14 (DAKKS D-PL-11034-01-01)

DIN EN 20105-A02; DIN EN ISO 105-A03; DIN EN ISO 2813; DIN EN ISO 3668; DIN EN ISO 11664-4; DIN EN ISO 11357-2; DIN EN ISO 11357-3; DIN EN ISO 11357-6; DIN EN ISO 11358-1; ISO 11359-2

ISO 3386-1Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 1: Low-density materials

As written on the certificate · Line 10 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 11 (DAKKS D-PL-11034-01-01)

DIN EN ISO 604; DIN EN ISO 3386-1; DIN EN ISO 3386-2; DIN EN ISO 178; DIN EN ISO 14125; DIN 55543-5; DIN EN 1464; DIN ISO 34-1; DIN EN ISO 868; DIN ISO 48-4; DIN EN ISO 179-1; DIN EN ISO 180

ISO 3386-2Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials

As written on the certificate · Line 10 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 11 (DAKKS D-PL-11034-01-01)

DIN EN ISO 604; DIN EN ISO 3386-1; DIN EN ISO 3386-2; DIN EN ISO 178; DIN EN ISO 14125; DIN 55543-5; DIN EN 1464; DIN ISO 34-1; DIN EN ISO 868; DIN ISO 48-4; DIN EN ISO 179-1; DIN EN ISO 180

ISO 3451-1Plastics - Determination of ash - Part 1: General methods

As written on the certificate · Line 12 (DAKKS D-PL-11034-01-01)

DIN EN ISO 8256; DIN 53435; DIN 53370; DIN ISO 4593; DIN ISO 815 -1; DIN EN ISO 1856; DIN EN ISO 62; DIN EN ISO 845; DIN EN ISO 1172; DIN EN ISO 1183 -1; DIN EN ISO 3451 -1

As written on the certificate · Line 13 (DAKKS D-PL-11034-01-01)

DIN EN ISO 1183 -1; DIN EN ISO 3451 -1; DIN EN ISO 307; DIN EN ISO 1133 -1; DIN EN ISO 1133 -2; DIN EN ISO 1628 -2; ISO 1628 -4; DIN EN ISO 1628 -5; ISO 1628 -6

ISO 3497Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods

As written on the certificate · Line 9 (DAKKS D-PL-11034-01-01)

DIN EN ISO 846; DIN ISO 9022-11; RTCA DO -160 D bis G; MIL -STD -810 E bis G; DIN EN ISO 2409; DIN EN ISO 3497; DIN EN ISO 2812 -1; DIN EN ISO 2812 -2; ISO 16750 -5; BMW GS 95003 -5; BMW GS 95011 -4

As written on the certificate · Line 8 (DAKKS D-PL-11034-01-00)

ISO 3668Paints and varnishes - Visual comparison of colour of paints

As written on the certificate · Line 14 (DAKKS D-PL-11034-01-01)

DIN EN 20105-A02; DIN EN ISO 105-A03; DIN EN ISO 2813; DIN EN ISO 3668; DIN EN ISO 11664-4; DIN EN ISO 11357-2; DIN EN ISO 11357-3; DIN EN ISO 11357-6; DIN EN ISO 11358-1; ISO 11359-2

ISO 4593Plastics - Film and sheeting - Determination of thickness by mechanical scanning

As written on the certificate · Line 12 (DAKKS D-PL-11034-01-01)

DIN EN ISO 8256; DIN 53435; DIN 53370; DIN ISO 4593; DIN ISO 815 -1; DIN EN ISO 1856; DIN EN ISO 62; DIN EN ISO 845; DIN EN ISO 1172; DIN EN ISO 1183 -1; DIN EN ISO 3451 -1

ISO 4892-2Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-01)

DIN EN 60068 -2-1; DIN EN 60068 -2-2; DIN EN 60068 -2-14; DIN EN 60068 -2-30; DIN EN 60068 -2-38; DIN EN 60068 -2-67; DIN EN 60068 -2-78; DIN EN ISO 6270 -2; DIN EN ISO 4892 -2; DIN EN ISO 105 -B06; DIN EN IEC 60068 -2-5; DIN EN 60068-2-11; DIN EN 60068 -2-52; DIN EN ISO 9227; DIN EN ISO 6988; DIN 50018; DIN EN 60068 -2-42; DIN EN 60068 -2-43; DIN EN 60068 -2-60; IEC 60068 -2-1:2007; DIN EN 60068-2-1 2008-01; IEC 60068 -2-2:2007; DIN EN 60068-2-2 2008-05

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-01)

IEC 60068-2-14:2009; DIN EN 60068-2-14; IEC 60068-2-30:2005; DIN EN 60068-2-30; IEC 60068-2-38:2009; DIN EN 60068-2-38; IEC 60068-2-67:1995 +A1:2019; DIN EN 60068-2-67; IEC 60068-2-78:2012; DIN EN 60068-2-78; DIN EN ISO 6270-2; DIN EN ISO 4892-2; DIN EN ISO 105-B06; DIN EN IEC 60068-2-5; IEC 60068-2-61:1991; DIN EN 60068-2-61; DIN EN 50155

ISO 6270-2Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir)

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 2 (DAKKS D-PL-11034-01-00)

DIN EN 60068-2-1; DIN EN 60068-2-2; DIN EN 60068-2-14; DIN EN 60068-2-30; DIN EN 60068-2-67; DIN EN 60068-2-78; DIN EN ISO 6270-2; BMW GS 95011-4; DIN EN 60068-2-38; DIN EN ISO 6988; DIN 50018; DIN EN 60068-2-11; DIN EN ISO 9227; DIN EN 60068-2-52; DIN V 40046-36; DIN V 40046-37; DIN EN 60068-2-60

As written on the certificate · Line 8 (DAKKS D-PL-11034-01-00)

ISO 6988Metallic and other non organic coatings - Sulfur dioxide test with general condensation of moisture

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 6 (DAKKS D-PL-11034-01-01)

ISO 16750-4; ISO 16750-5; IEC 60068-2-11; DIN EN 60068-2-11; IEC 60068-2-52; DIN EN 60068-2-52; DIN EN ISO 9227; DIN EN ISO 6988; DIN 50018; IEC 60068-2-42; DIN EN 60068-2-42; IEC 60068-2-43; DIN EN 60068-2-43; IEC 60068-2-60; DIN EN 60068-2-60

As written on the certificate · Line 2 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 8 (DAKKS D-PL-11034-01-00)

ISO 8256Plastics - Determination of tensile-impact strength

As written on the certificate · Line 12 (DAKKS D-PL-11034-01-01)

DIN EN ISO 8256; DIN 53435; DIN 53370; DIN ISO 4593; DIN ISO 815 -1; DIN EN ISO 1856; DIN EN ISO 62; DIN EN ISO 845; DIN EN ISO 1172; DIN EN ISO 1183 -1; DIN EN ISO 3451 -1

ISO 9022-11Optics and photonics - Environmental test methods - Part 11: Mould growth

As written on the certificate · Line 8 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 9 (DAKKS D-PL-11034-01-01)

DIN EN ISO 846; DIN ISO 9022-11; RTCA DO -160 D bis G; MIL -STD -810 E bis G; DIN EN ISO 2409; DIN EN ISO 3497; DIN EN ISO 2812 -1; DIN EN ISO 2812 -2; ISO 16750 -5; BMW GS 95003 -5; BMW GS 95011 -4

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-00)

ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 6 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 2 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 8 (DAKKS D-PL-11034-01-00)

ISO 11358-1Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles

As written on the certificate · Line 14 (DAKKS D-PL-11034-01-01)

DIN EN 20105-A02; DIN EN ISO 105-A03; DIN EN ISO 2813; DIN EN ISO 3668; DIN EN ISO 11664-4; DIN EN ISO 11357-2; DIN EN ISO 11357-3; DIN EN ISO 11357-6; DIN EN ISO 11358-1; ISO 11359-2

ISO 11359-2Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature

As written on the certificate · Line 14 (DAKKS D-PL-11034-01-01)

DIN EN 20105-A02; DIN EN ISO 105-A03; DIN EN ISO 2813; DIN EN ISO 3668; DIN EN ISO 11664-4; DIN EN ISO 11357-2; DIN EN ISO 11357-3; DIN EN ISO 11357-6; DIN EN ISO 11358-1; ISO 11359-2

ISO 11664-4Colorimetry - Part 4: CIE 1976 L*a*b* Colour space

As written on the certificate · Line 14 (DAKKS D-PL-11034-01-01)

DIN EN 20105-A02; DIN EN ISO 105-A03; DIN EN ISO 2813; DIN EN ISO 3668; DIN EN ISO 11664-4; DIN EN ISO 11357-2; DIN EN ISO 11357-3; DIN EN ISO 11357-6; DIN EN ISO 11358-1; ISO 11359-2

ISO 14125Fibre-reinforced plastic composites - Determination of flexural properties

As written on the certificate · Line 10 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 11 (DAKKS D-PL-11034-01-01)

DIN EN ISO 604; DIN EN ISO 3386-1; DIN EN ISO 3386-2; DIN EN ISO 178; DIN EN ISO 14125; DIN 55543-5; DIN EN 1464; DIN ISO 34-1; DIN EN ISO 868; DIN ISO 48-4; DIN EN ISO 179-1; DIN EN ISO 180

ISO 20653Road vehicles - Degrees of protection (IP code) - Protection of electrical equipment against foreign objects, water and access

As written on the certificate · Line 8 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 3 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 9 (DAKKS D-PL-11034-01-00)

IEC 60529:1989 + A1:1999 + A2:2013; DIN EN 60529; DIN 40050 -9; ISO 20653

ISO 21546Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)

As written on the certificate · Line 15 (DAKKS D-PL-11034-01-01)

DIN EN ISO 105 -X12; DIN EN ISO 21546; DIN EN ISO 22557; DIN EN 60068 -2-70

ISO 22557Paints and varnishes - Scratch test using a spring-loaded pen

As written on the certificate · Line 15 (DAKKS D-PL-11034-01-01)

DIN EN ISO 105 -X12; DIN EN ISO 21546; DIN EN ISO 22557; DIN EN 60068 -2-70

IEC 60068 series

IEC 60068-2-1Environmental testing - Part 2-1: Tests - Test A: ColdCertificate says EN 60068-2-1. Probably the same standard; not checked against the EN document.

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 2 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-00)

IEC 60068-2-2Environmental testing - Part 2-2: Tests - Test B: Dry heat

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 2 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-00)

IEC 60068-2-5Name not checked yet

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-01)

IEC 60068-2-6Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)

As written on the certificate · Line 7 (DAKKS D-PL-11034-01-01)

DIN EN 60068-2-27; ISO 16750-3; DIN EN 60068-2-6; DIN EN 60068-2-64; DIN EN 60068-2-53; DIN EN 60068-2-80; DIN EN 60068-2-31; IEC 60068-2-27:2008; IEC 60068-2-6:2007; IEC 60068-2-64:2008 +A1:2019; IEC 60068-2-53:2010; IEC 60068-2-80:2005; IEC 60068-2-31:2008

As written on the certificate · Line 3 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-00)

IEC 60068-2-10Name not checked yet

As written on the certificate · Line 8 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 3 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-00)

IEC 60068 -2-10:2005 + A1:2018; DIN EN 60068 -2-10 2006 -03; IEC 60068 -2-11:1981; IN EN 60068 -2-11 2000 -02; IEC 60068 -2-14:2009; DIN EN 60068 -2-14 2010 -04; IEC 60068 -2-27:2008; DIN EN 60068 -2-27 2010 -02; DIN EN 60068 -2-29 1995 -03; IEC 60068 -2-30:2005; DIN EN 60068-2-30 2006-06; IEC 60068 -2-31:2008; DIN EN 60068-2-31 2009-04; DIN EN 60068 -2-32 1995-03; IEC 60068 -2-38:2009; DIN EN 60068-2-38 2010-06; IEC 60068 -2-42:2003; DIN EN 60068-2-42 2004-04; IEC 60068 -2-43:2003; DIN EN 60068-2-43 2004-04

IEC 60068-2-11Environmental testing - Part 2-11: Tests - Test Ka: Salt mist

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 6 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 2 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-00)

IEC 60068-2-14Environmental testing - Part 2-14: Tests - Test N: Change of temperature

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 2 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-00)

IEC 60068-2-27Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock

As written on the certificate · Line 7 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 3 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-00)

IEC 60068-2-29Name not checked yet

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-00)

IEC 60068-2-30Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 2 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-00)

IEC 60068-2-31Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens

As written on the certificate · Line 7 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 3 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-00)

IEC 60068-2-32Name not checked yet

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-00)

IEC 60068-2-38Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 2 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-00)

IEC 60068-2-42Name not checked yet

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 6 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-00)

IEC 60068-2-43Name not checked yet

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 6 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-00)

IEC 60068-2-50Name not checked yet

As written on the certificate · Line 6 (DAKKS D-PL-11034-01-00)

DIN EN 60068 -2-50; DIN EN 60068 -2-51; IEC 60068 -2-52:2017; DIN EN 60068-2-52; IEC 60068 -2-53:2010; DIN EN 60068-2-53; IEC 60068 -2-58:2015 + A1:2017; DIN EN 60068-2-58; IEC 60068 -2-60:2015; DIN EN 60068-2-60; IEC 60068 -2-61:1991; DIN EN 60068-2-61; IEC 60068 -2-64:2008 + A1:2019; DIN EN 60068-2-64; IEC 60068 -2-67:1995 + A1:2019; DIN EN 60068-2-67; IEC 60068 -2-68:1994; DIN EN 60068-2-68

IEC 60068-2-51Name not checked yet

As written on the certificate · Line 6 (DAKKS D-PL-11034-01-00)

IEC 60068-2-52Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 6 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 2 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 6 (DAKKS D-PL-11034-01-00)

IEC 60068-2-53Name not checked yet

As written on the certificate · Line 7 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 3 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 6 (DAKKS D-PL-11034-01-00)

IEC 60068-2-58Name not checked yet

As written on the certificate · Line 6 (DAKKS D-PL-11034-01-00)

IEC 60068-2-60Name not checked yet

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 6 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 2 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 6 (DAKKS D-PL-11034-01-00)

IEC 60068-2-61Name not checked yet

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 6 (DAKKS D-PL-11034-01-00)

IEC 60068-2-64Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidanceCertificate says EN 60068-2-64. Probably the same standard; not checked against the EN document.

As written on the certificate · Line 7 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 3 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 6 (DAKKS D-PL-11034-01-00)

IEC 60068-2-67Name not checked yet

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 2 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 6 (DAKKS D-PL-11034-01-00)

IEC 60068-2-68Name not checked yet

As written on the certificate · Line 6 (DAKKS D-PL-11034-01-00)

IEC 60068-2-70Name not checked yet

As written on the certificate · Line 15 (DAKKS D-PL-11034-01-01)

DIN EN ISO 105 -X12; DIN EN ISO 21546; DIN EN ISO 22557; DIN EN 60068 -2-70

IEC 60068-2-78Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 2 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 7 (DAKKS D-PL-11034-01-00)

IEC 60068 -2-78:2012; DIN EN 60068-2-78 2014-02; IEC 60068 -2-80:2005; DIN EN 60068-2-80 2006-05; DIN V 40046 -36 2006-08; DIN V 40046 -37 2006-08; RTCA DO -160 D bis G 2010-12; MIL -STD -810 E bis G/Change 1 2014-04; BMW GS 95003 -5 2010-01; BMW GS 95011 -4 2010-06; BMW GS 95024 -3-1 2019-08; MBN LV 124 -2 2013-08

IEC 60068-2-80Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode

As written on the certificate · Line 7 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 3 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 7 (DAKKS D-PL-11034-01-00)

IEC

IEC 60112Name not checked yet

As written on the certificate · Line 3 (DAKKS D-PL-11034-01-02)

IEC 60243-1; DIN EN 60243-1; VDE 0303-21; IEC 60243-2; DIN EN 60243-2; VDE 0303-22; IEC 60112; DIN EN IEC 60112; VDE 0303-11; DIN EN IEC 62631-3-1; VDE 0307-3-1; DIN EN IEC 62631-3-2; VDE 0307-3-2; DIN EN 62631-3-3; VDE 0307-3-3

IEC 60243-1Name not checked yet

As written on the certificate · Line 3 (DAKKS D-PL-11034-01-02)

IEC 60243-2Name not checked yet

As written on the certificate · Line 3 (DAKKS D-PL-11034-01-02)

IEC 60529Degrees of protection provided by enclosures (IP Code)Certificate says EN 60529. Probably the same standard; not checked against the EN document.

As written on the certificate · Line 8 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 3 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 9 (DAKKS D-PL-11034-01-00)

IEC 60529:1989 + A1:1999 + A2:2013; DIN EN 60529; DIN 40050 -9; ISO 20653

IEC 61373Railway applications - Rolling stock equipment - Shock and vibration tests

As written on the certificate · Line 8 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-00)

ISO 1628 series

ISO 1628-2Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins

As written on the certificate · Line 13 (DAKKS D-PL-11034-01-01)

DIN EN ISO 1183 -1; DIN EN ISO 3451 -1; DIN EN ISO 307; DIN EN ISO 1133 -1; DIN EN ISO 1133 -2; DIN EN ISO 1628 -2; ISO 1628 -4; DIN EN ISO 1628 -5; ISO 1628 -6

ISO 1628-4Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 4: Polycarbonate (PC) moulding and extrusion materials

As written on the certificate · Line 13 (DAKKS D-PL-11034-01-01)

DIN EN ISO 1183 -1; DIN EN ISO 3451 -1; DIN EN ISO 307; DIN EN ISO 1133 -1; DIN EN ISO 1133 -2; DIN EN ISO 1628 -2; ISO 1628 -4; DIN EN ISO 1628 -5; ISO 1628 -6

ISO 1628-5Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers

As written on the certificate · Line 13 (DAKKS D-PL-11034-01-01)

DIN EN ISO 1183 -1; DIN EN ISO 3451 -1; DIN EN ISO 307; DIN EN ISO 1133 -1; DIN EN ISO 1133 -2; DIN EN ISO 1628 -2; ISO 1628 -4; DIN EN ISO 1628 -5; ISO 1628 -6

ISO 1628-6Plastics - Determination of viscosity number and limiting viscosity number - Part 6: Methyl methacrylate polymers

As written on the certificate · Line 13 (DAKKS D-PL-11034-01-01)

DIN EN ISO 1183 -1; DIN EN ISO 3451 -1; DIN EN ISO 307; DIN EN ISO 1133 -1; DIN EN ISO 1133 -2; DIN EN ISO 1628 -2; ISO 1628 -4; DIN EN ISO 1628 -5; ISO 1628 -6

EN

EN 1464Name not checked yet

As written on the certificate · Line 10 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 11 (DAKKS D-PL-11034-01-01)

DIN EN ISO 604; DIN EN ISO 3386-1; DIN EN ISO 3386-2; DIN EN ISO 178; DIN EN ISO 14125; DIN 55543-5; DIN EN 1464; DIN ISO 34-1; DIN EN ISO 868; DIN ISO 48-4; DIN EN ISO 179-1; DIN EN ISO 180

EN 20105-A02Name not checked yet

As written on the certificate · Line 14 (DAKKS D-PL-11034-01-01)

DIN EN 20105-A02; DIN EN ISO 105-A03; DIN EN ISO 2813; DIN EN ISO 3668; DIN EN ISO 11664-4; DIN EN ISO 11357-2; DIN EN ISO 11357-3; DIN EN ISO 11357-6; DIN EN ISO 11358-1; ISO 11359-2

EN 50155Railway applications - Rolling stock - Electronic equipment

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-00)

IEC 62631 series

IEC 62631-3-1Name not checked yet

As written on the certificate · Line 3 (DAKKS D-PL-11034-01-02)

IEC 62631-3-2Name not checked yet

As written on the certificate · Line 3 (DAKKS D-PL-11034-01-02)

IEC 62631-3-3Name not checked yet

As written on the certificate · Line 3 (DAKKS D-PL-11034-01-02)

ISO 105 series

ISO 105-A03Textiles - Tests for colour fastness - Part A03: Grey scale for assessing staining

As written on the certificate · Line 14 (DAKKS D-PL-11034-01-01)

DIN EN 20105-A02; DIN EN ISO 105-A03; DIN EN ISO 2813; DIN EN ISO 3668; DIN EN ISO 11664-4; DIN EN ISO 11357-2; DIN EN ISO 11357-3; DIN EN ISO 11357-6; DIN EN ISO 11358-1; ISO 11359-2

ISO 105-B06Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 5 (DAKKS D-PL-11034-01-01)

ISO 105-X12Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing

As written on the certificate · Line 15 (DAKKS D-PL-11034-01-01)

DIN EN ISO 105 -X12; DIN EN ISO 21546; DIN EN ISO 22557; DIN EN 60068 -2-70

ISO 11357 series

ISO 11357-2Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height

As written on the certificate · Line 14 (DAKKS D-PL-11034-01-01)

DIN EN 20105-A02; DIN EN ISO 105-A03; DIN EN ISO 2813; DIN EN ISO 3668; DIN EN ISO 11664-4; DIN EN ISO 11357-2; DIN EN ISO 11357-3; DIN EN ISO 11357-6; DIN EN ISO 11358-1; ISO 11359-2

ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization

As written on the certificate · Line 14 (DAKKS D-PL-11034-01-01)

DIN EN 20105-A02; DIN EN ISO 105-A03; DIN EN ISO 2813; DIN EN ISO 3668; DIN EN ISO 11664-4; DIN EN ISO 11357-2; DIN EN ISO 11357-3; DIN EN ISO 11357-6; DIN EN ISO 11358-1; ISO 11359-2

ISO 11357-6Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

As written on the certificate · Line 14 (DAKKS D-PL-11034-01-01)

DIN EN 20105-A02; DIN EN ISO 105-A03; DIN EN ISO 2813; DIN EN ISO 3668; DIN EN ISO 11664-4; DIN EN ISO 11357-2; DIN EN ISO 11357-3; DIN EN ISO 11357-6; DIN EN ISO 11358-1; ISO 11359-2

ISO 16750 series

ISO 16750-3Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 3: Mechanical loads

As written on the certificate · Line 7 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 3 (DAKKS D-PL-11034-01-00)

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-00)

ISO 16750-4Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads

As written on the certificate · Line 6 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-00)

ISO 16750-5Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 5: Chemical loads

As written on the certificate · Line 6 (DAKKS D-PL-11034-01-01)

As written on the certificate · Line 9 (DAKKS D-PL-11034-01-01)

DIN EN ISO 846; DIN ISO 9022-11; RTCA DO -160 D bis G; MIL -STD -810 E bis G; DIN EN ISO 2409; DIN EN ISO 3497; DIN EN ISO 2812 -1; DIN EN ISO 2812 -2; ISO 16750 -5; BMW GS 95003 -5; BMW GS 95011 -4

As written on the certificate · Line 4 (DAKKS D-PL-11034-01-00)

ISO 527 series

ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles

As written on the certificate · Line 10 (DAKKS D-PL-11034-01-01)

ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics

As written on the certificate · Line 10 (DAKKS D-PL-11034-01-01)

ISO 527-3Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets

As written on the certificate · Line 10 (DAKKS D-PL-11034-01-01)

Other standards

VW 80000Name not checked yet

As written on the certificate · Line 8 (DAKKS D-PL-11034-01-00)

Scope as published by DAKKS

27 lines

DAKKS

ISO/IEC 17025

Active

D-PL-11034-01-00

View scope

DAKKS

ISO/IEC 17025

Active

D-PL-11034-01-01

View scope

DAKKS

ISO/IEC 17025

Active

D-PL-11034-01-02

View scope

Location

Hornstraße 5, Leipzig, 04249, DE

51.30683, 12.32928

Open in Maps

← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on 2026-09-25.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.