United States

Semblex Corporation

388 Carol Lane Campus, 60126, Elmhurst, IL, United States

A2LA 794.01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 12
A2LA certificate: 1
Site in our directory: 1

A2LA accredited scope

What this lab is accredited for

Our reading of the A2LA scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 12 standard numbers and the 9 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM7

ASTM B117Standard Practice for Operating Salt Spray (Fog) Apparatus

ASTM B568

ASTM E3Standard Guide for Preparation of Metallographic Specimens

ASTM E18Standard Test Methods for Rockwell Hardness of Metallic Materials

ASTM E384Standard Test Method for Microindentation Hardness of Materials

ASTM F606Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets

ASTM F788

ISO4

ISO 898-5Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread

ISO 2702Fasteners - Heat treated tapping screws - Mechanical and physical properties

ISO 6157-1Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements

ISO 16232Road vehicles - Cleanliness of components and systems

Other standards1

DIN 7513

Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.

Scope as published by A2LA

5 lines

A2LA

ISO/IEC 17025

Active

794.01

The scope document we hold says it is valid until 2027-04-30.

View scope

Accredited scope, certificate 794.01

Line	Method	Matrix	Range
1	ASTM F606/F606M; DIN 7513 (Section 5.2.3); EN20-898-1 (Section 8.5); SAE J429; SAE J1216; ISO-898-1; ASTM E18; CHRYSLER MS-4515 (Section 2.41.2); FORD WD/950 (Section 3.1); FORD WD/951 (Section 4.1); FORD WD/953 (Section 2.2/2.3); GM 6010M (Sections 4.1, 4.2, and 4.3); GM 6109M; GM 6177M (Section 3.2); GM 6170M (Section 4.1); SAE J417; SAE J429 (Sections 5.1 and 5.2); SAE J1216 (Sections 3.1 and 3.2); ASTM E384 (Knoop); DIN 50-133; DIN 50-150; GM 6109M, 6177M (Section 3.1); GM 6170M (Sections 4.2 and 4.3); SAE J423; ASTM E3; CHRYSLER MS415 (Sections 2.4.1.1 and 2.4.2.2); DIN 50 190-1; GM 6010M (Sections 4.2 and 4.3); GM 6171M (Appendix A); SAE J78; FORD WD/952 (Section 4.1); ISO 898-5 (Sections 6.2.2, 6.2.2.1, and 6.2.2.2); GM 6104M; SAE J121; SAE J419	Fasteners	to 60 klbs
2	ASTM F788/F788M; Chrysler PF-5188; DX 520007; Ford WA990; GM 6102M; ISO 6157-1/3; PA WI 073; SAE J123; SAE J1061; ASTM B568; ISO 16232; ASTM B117; ISO-9227; GMW3286; USCAR-1; ANSI/ASME B18.6.4 and 2.91.1; CHRYSLER MS415 (Section 2.6); DIN 7513 (Section 5.2.1); DIN EN ISO 2702 (Section 6.2.1); FORD WD/952 (Section 4.3); WD/953 (Section3.2); GM 6010M (Section 3.6); 6170M (Section 4.6); 6171M (Section 4.6); SAE J81 (Section 4.9); ANSI B18.6.4 and 2.9.1.2; DIN 7513 (Section 5.2.2); DIN EN ISO 2702 (Section 6.2.2); FORD WD/950 (Section 4.2); WD/951 (Section 4.4); WD/953 (Section 2.6); GM 6010M (Sections 3.5 and 4.4); 6170M (Section 4.5); 6171M (Sections 3.5, 3.6, 4.4 and 4.5); SAE J81 (Section 3, Table 5A); WI ENG 0071; FORD WD/951 (Sections 3.3 and 4.5); GM 6170M (Section 3.8); 6171M (Sections 3.8 and 4.6); SAE J81 (Sections 3.3.7 and 4.8); WI ENS 0221; WI ENS 0261; WI ENS 0161; WI ENS 0251; WI ENS 0121; WI ENS 0201; WI ENS 0211; WI ENS 0241; WI ENS 0231; WI ENS 0361	-	to 200 N-m
3	MIL-STD 120 (Canceled 1996)	-	0 to 360 °
4	MIL-STD 120	-	to 2 in
5	Extracted from the scope document; tables may not line up. View scope for the original. For the tests to which this accreditation applies, please refer to the laboratory’s «field» Scope of Accreditation. Accredited Laboratory A2LA has accredited SEMBLEX CORPORATION Elmhurst, IL for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 20th day of March 2025. _______________________ Mr. Trace McInturff, Vice President, Accreditation Services For the Accreditation Council Certificate Number 0794.01 Valid to April 30, 2027

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

388 Carol Lane Campus, Elmhurst, IL, 60126, US

41.89947, -87.94034

Open in Maps

← All accredited testing labs in Illinois

← All accredited testing labs in United States

Labs with overlapping accredited scope in United States

Accreditation data refreshed from the A2LA register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.