PEM (China) Co.,
99 Middle Chenfeng Road, Kunshan, Jiangsu Province, Post Code 215300, People's Republic of China, Jiangsu Province, China
Visit website- Accredited standards
- 19
- A2LA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 19 standard numbers and the 16 official names we hold. When no standard matches, it searches the method text of every scope line.
ASTM11
ASTM B117Standard Practice for Operating Salt Spray (Fog) Apparatus
ASTM B499
ASTM B568
ASTM E8Standard Test Methods for Tension Testing of Metallic Materials
ASTM E18Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM E92Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
ASTM E384Standard Test Method for Microindentation Hardness of Materials
ASTM E415Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
ASTM E1086Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
ASTM E1251
ASTM F606Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ISO5
ISO 3497Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods
ISO 6157-3Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
ISO 16047Fasteners - Torque/clamp force testing
ISO 898 series3
ISO 898-1Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread
ISO 898-2Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes
ISO 898-7Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
ASTM E18; ASTM E384; ASTM E92; ISO 898-2; ASTM F606/F606M; ISO 898-1; ISO 898-7; SAE J1237; SAE J81; ISO 16047; GMW16730; SAE/USCAR-11; SAE/USCAR-7; ISO 6157-3; GM6102M; ISO 898-1; SAE/USCAR-8; ASTM E8/E8M; ISO 6892-1; ASTM B568; ISO 3497; ASTM B499; SAE J423; ASTM B117; ISO 9227; SAE/USCAR-1
ASTM E415; GB/T 4336; ASTM E1086; GB/T 11170; ASTM E1251; GB/T 7999
Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.
Scope as published by A2LA
3 lines
ISO/IEC 17025
Active2772.01
The scope document we hold says it is valid until 2027-01-31.
Accredited scope, certificate 2772.01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ASTM E18; ASTM E384; ASTM E92; ISO 898-2; ASTM F606/F606M; ISO 898-1; ISO 898-7; SAE J1237; SAE J81; ISO 16047; GMW16730; SAE/USCAR-11; SAE/USCAR-7; ISO 6157-3; GM6102M; ISO 898-1; SAE/USCAR-8; ASTM E8/E8M; ISO 6892-1; ASTM B568; ISO 3497; ASTM B499; SAE J423; ASTM B117; ISO 9227; SAE/USCAR-1 | Fasteners | - |
| 2 | ASTM E415; GB/T 4336; ASTM E1086; GB/T 11170; ASTM E1251; GB/T 7999 | Carbon and Low-Alloy Steel; Austenitic Stainless Steel; Aluminum and Aluminum Alloys | - |
| 3 | Extracted from the scope document; tables may not line up. View scope for the original. For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation.
Accredited Laboratory
A2LA has accredited
PEM (CHINA) CO., LTD.
Jiangsu Province, People’s republic of China
for technical competence in the field of
Mechanical Testing
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates
technical competence for a defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
Presented this 8th day of January 2025.
_______________________
Mr. Trace McInturff, Vice President, Accreditation Services
For the Accreditation Council
Certificate Number 2772.01
Valid to January 31, 2027 | ||
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Labs with overlapping accredited scope in China
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.