Registers refreshed 2026-11-08.See refresh dates
China

JiangSu Electronic Information Product Quality Supervision & Inspection Institute (JiangSu Information Security Evaluation Center)

No.100 Jinshui Road, Wuxi, Jiangsu, People's Republic of China, Wuxi, China

Visit website
A2LA 6385.01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
12
A2LA certificate
1
Site in our directory
1
A2LA accredited scope

What this lab is accredited for

Our reading of the A2LA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 12 standard numbers and the 11 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO4
ISO 7637-2Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
ISO 7637-3Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
ISO 10605Road vehicles - Test methods for electrical disturbances from electrostatic discharge
ISO 16750-2Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads
ISO 11452 series4
ISO 11452-2Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure
ISO 11452-4Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
ISO 11452-8Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields
ISO 11452-9Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9: Portable transmitters
Other standards4
ANSI C63.4American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
ANSI C63.26
FCC PART 15Radio Frequency Devices
ICES-001Industrial, Scientific and Medical (ISM) Equipment

Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.

Scope as published by A2LA

4 lines
A2LA

ISO/IEC 17025

Active

6385.01

The scope document we hold says it is valid until 2027-08-31.

View scope

Accredited scope, certificate 6385.01

LineMethodMatrixRange
1ISO/IEC 17025:2017; 47 CFR FCC Part 15, Subpart B (using ANSI C63.4:2014); ICES-001; ICES-003; 47 CFR FCC Part 15C (using ANSI C63.10:2013); ANSI C63.10-2020+Cor.1-2023; 47 CFR FCC Part 15E (using ANSI C63.10:2013); 47 CFR FCC Part 15E (using FCC KDB 905462 D02 v02); 47 CFR FCC Part 15F (using ANSI C63.10:2013); RSS-Gen; RSS-210; RSS-216; RSS-220; RSS-247; RSS-248; RSS-310-to 40 GHz
247 CFR FCC Parts 22; 47 CFR FCC Parts 24; 47 CFR FCC Parts 25; 47 CFR FCC Parts 27; ANSI C63.26:2015; 47 CFR FCC Part 96; 47 CFR FCC Parts 25 (above 3 GHz); 47 CFR FCC Part 30; 47 CFR FCC Part 74; 47 CFR FCC Part 90 (above 3 GHz); 47 CFR FCC Part 95 (above 3 GHz); 47 CFR FCC Part 97 (above 3 GHz); 47 CFR FCC Part 101; 47 CFR FCC Parts 22 (non-cellular); 47 CFR FCC Part 90 (below 3 GHz); 47 CFR FCC Part 95 (below 3 GHz); 47 CFR FCC Part 97 (below 3 GHz); 47 CFR FCC Part 101 (below 3 GHz); RSS-130; RSS-132; RSS-133; RSS-139; RSS-140; RSS-170; RSS-192; RSS-195; RSS-196; RSS-197; RSS-199; RSS-252; IEC CISPR 25; ISO 11452-2; ISO 11452-4; ISO 11452-8; ISO 11452-9; ISO 10605; ISO 7637-2; ISO 7637-3; ISO 16750-2--
347 Code of Federal Regulations; FCC KDB 974614, Appendix A, Table A.1; ANSI C63.4:2014; ANSI C63.10:2013; FCC KDB 905462 D02 v02; ANSI C63.26:2015-to 260000 MHz
4

Extracted from the scope document; tables may not line up. View scope for the original.

For the tests to which this accreditation applies, please refer to the laboratory’s Electrical Scope of Accreditation. Accredited Laboratory A2LA has accredited JIANGSU ELECTRONIC INFORMATION PRODUCT QUALITY SUPERVISION & INSPECTION INSTITUTE Wuxi, People’s Republic of China for technical competence in the field of Electrical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 24th day of September 2025. _______________________ Mr. Trace McInturff, Vice President, Accreditation Services For the Accreditation Council Certificate Number 6385.01 Valid to August 31, 2027

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Labs with overlapping accredited scope in China

Accreditation data refreshed from the A2LA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.