John Deere Intelligent Solutions Group
4101 19th Ave North, 58102, Fargo, ND, United States
Visit website- Accredited standards
- 11
- A2LA certificates
- 2
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 11 standard numbers and the 11 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO11
ISO 7637-2Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
ISO 7637-3Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
ISO 10605Road vehicles - Test methods for electrical disturbances from electrostatic discharge
ISO 11451-2Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Off-vehicle radiation sources
ISO 11451-4Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
ISO 11452-2Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure
ISO 11452-4Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
ISO 13766-1Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 1: General EMC requirements under typical electromagnetic environmental conditions
ISO 13766-2Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety
ISO 14982Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria
ISO 16750-2Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads
ISO 11452-4; ISO 13766-1 Section 4.7(BCI); ISO 13766-2 Section 5.3(BCI); ISO 14982 Section 6.6 (BCI); JDQ 203 Section 5 (BCI); United Nations E/ECE/324E/ECE/TRANS/505 Annex 9/Rev 6 Regulation No. 10, Section 6.8 (BCI); ISO 7637-2; ISO 7637-3 Section 4.5(CCC method); ISO 16750-2 Sections 4.4, 4.6.1, 4.6.2, 4.6.3, and 4.6.4; SAE J1455 Section 4.13.2; IACS-UR-E10 Rev 10 Sections 3, 4, 9 and 10; DNV-CG-0339 Sections 4, 5, 12 and 13; JDQ 202; United Nations E/ECE/324E/ECE/TRANS/505 Addendum 9/Rev 6 Regulation No. 10, Section 6.9; SAE J1455 Section 4.13.2; IACS-UR-E10 Rev 10 Section 13; DNV-CG-0339 Section 14.9; JDQ 202; ISO 10605 Sections 8 and 9; SAE J1455 Sections 4.13.1; ISO 16750-2, Section 4.9; JDQ 202
ISO 7637-2; ISO 7637-3 Section 4.5(CCC method); ISO 16750-2 Sections 4.4, 4.6.1, 4.6.2, 4.6.3, and 4.6.4; SAE J1455, Section 4.13.2; JDQ 202; United Nations E/ECE/324E/ECE/TRANS/505 Addendum 9/Rev 6 Regulation No. 10, Section 6.9; ISO 10605 Sections 8 and 9; ISO 16750-2, Section 4.9
CISPR 12 Section 4; CISPR 25 Section 6.5; ISO 13766-1 Sections 4.2, 4.3, 4.5, and 4.6; ISO 14982 Sections 6.1, 6.2, 6.4 and 6.5; JDQ 203; United Nations E/ECE/324E/ECE/TRANS/505 Addendum 9/Rev 6 Regulation No. 10, Sections 6.2, 6.3, 6.5 and 6.6; EU 2015/208 Annex 15 Sections 3.2, 3.3, 3.5 and 3.6; CISPR 25 Sections 6.3 and 6.4; JDQ 203; United Nations E/ECE/324E/ECE/TRANS/505 Addendum 9/Rev 6 Regulation No. 10, Section 6.7; ISO 11451-2; ISO 11452-2; ISO 13766-1 Sections 4.4 and 4.7; ISO 13766-2 Sections 5.2 and 5.3; ISO 14982 Sections 6.3 and 6.6; JDQ 203; United Nations E/ECE/324E/ECE/TRANS/505 Addendum 9/Rev 6 Regulation No. 10, Sections 6.4 and 6.8; EU 2015/208 Annex 15 Sections 3.4 and 3.7; ISO 11451-4; ISO 11452-4; ISO 13766-1 Sections 4.4 and 4.7(BCI); ISO 13766-2 Sections 5.2 and 5.3(BCI); ISO 14982 Sections 6.3 and 6.6 (BCI); JDQ 203; United Nations E/ECE/324E/ECE/TRANS/505 Annex 9/Rev 6 Regulation No. 10, Sections 6.4 and 6.8 (BCI); EU 2015/208 Annex 15 Sections 3.4 and 3.7
CISPR 25 Section 6.5; ISO 13766-1 Sections 4.5 and 4.6; ISO 14982 Sections 6.4 and 6.5; JDQ 203 Section 9; United Nations E/ECE/324E/ECE/TRANS/505 Addendum 9/Rev 6 Regulation No. 10, Sections 6.5 and 6.6; CISPR 25 Sections 6.3 and 6.4; JDQ 203 Section 8; United Nations E/ECE/324E/ECE/TRANS/505 Addendum 9/Rev 6 Regulation No. 10, Section 6.7; ISO 11452-2; ISO 13766-1 Section 4.7; ISO 13766-2 Section 5.3; ISO 14982 Section 6.6; JDQ 203 Section 5; United Nations E/ECE/324E/ECE/TRANS/505 Addendum 9/Rev 6 Regulation No. 10, Section 6.8
Read from the A2LA scope documents we downloaded on 2026-10-27. Register refreshed 2026-11-06.
Scope as published by A2LA
9 lines
ISO/IEC 17025
Active3010.01
The scope document we hold says it is valid until 2028-06-30.
ISO/IEC 17025
Active3010.02
The scope document we hold says it is valid until 2028-06-30.
Location
Labs with overlapping accredited scope in United States
- APTIV WESTFIELD TESTWestfield, IN · ~1,146 kmA2LAShares 2 accredited test methodsISO 11452-4ISO 7637-2
- Elite Electronic EngineeringDowners Grove, IL · ~897 kmA2LAShares 1 accredited test methodISO 7637-2
- Element Materials Technology BurtonBurton, MI · ~1,120 kmA2LAShares 1 accredited test methodISO 7637-2
- DEKRA CertificationPlymouth, MI · ~1,161 kmA2LAShares 1 accredited test methodISO 7637-2
- Applus Reliable AnalysisMadison Heights, MI · ~1,183 kmA2LAShares 1 accredited test methodISO 11452-2
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.