BUREAU VERITAS LABORATOIRES PESSAC
31 AVENUE GUSTAVE EIFFEL, 33600, PESSAC, France
Free. We check which accredited labs can do it, starting with this one, and reply within two working days with who can do it, how fast, and roughly what it costs.
Only the laboratory you pick gets your contact details. We ask the others without them.
Contact this laboratory
No contact information available
Open COFRAC register entryWork at BUREAU VERITAS LABORATOIRES PESSAC?
Claim this profile to keep it accurate.
Register record
- COFRACRefreshed
- 1-2421Active
Accredited standards
8Our reading of the COFRAC scope: each standard once, with its official name where we have checked it. Click a standard to see the scope line it comes from, word for word.
ASTM E112Standard Test Methods for Determining Average Grain Size
NF EN ISO 6507-1; NF EN ISO 643; ASTM E112; NF A 04-503; NF A 04-505; NF EN ISO 2624; DMC 250; DMC 261; DMC 262
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
NF ISO 16700; ISO 527-1; ISO 527-2; ISO 527-4; PRT AM 807; PRT AM 808; PRT AM 750
ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
NF ISO 16700; ISO 527-1; ISO 527-2; ISO 527-4; PRT AM 807; PRT AM 808; PRT AM 750
ISO 527-4Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
NF ISO 16700; ISO 527-1; ISO 527-2; ISO 527-4; PRT AM 807; PRT AM 808; PRT AM 750
ISO 643Steels - Micrographic determination of the apparent grain size
NF EN ISO 6507-1; NF EN ISO 643; ASTM E112; NF A 04-503; NF A 04-505; NF EN ISO 2624; DMC 250; DMC 261; DMC 262
ISO 2624Copper and copper alloys - Estimation of average grain size
NF EN ISO 6507-1; NF EN ISO 643; ASTM E112; NF A 04-503; NF A 04-505; NF EN ISO 2624; DMC 250; DMC 261; DMC 262
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
NF EN ISO 6507-1; NF EN ISO 643; ASTM E112; NF A 04-503; NF A 04-505; NF EN ISO 2624; DMC 250; DMC 261; DMC 262
ISO 16700Microbeam analysis - Scanning electron microscopy - Guidelines for calibrating image magnification
NF ISO 16700; ISO 527-1; ISO 527-2; ISO 527-4; PRT AM 807; PRT AM 808; PRT AM 750
Scope as published by COFRAC
3 lines
ISO/IEC 17025
Active1-2421
The scope document we hold says it is valid until 2027-06-30.
Accredited scope, certificate 1-2421
| Line | Discipline | Method | Matrix | Range |
|---|---|---|---|---|
| 1 | materials | - | MATERIAUX / MATERIAUX METALLIQUES - MATERIAUX PLASTIQUES ET COMPOSITES A MATRICE ORGANIQUE; MATERIALS / METALLIC MATERIALS - PLASTIC MATERIALS AND ORGANIC COMPOSITES | - |
| 2 | materials | NF EN ISO 6507-1; NF EN ISO 643; ASTM E112; NF A 04-503; NF A 04-505; NF EN ISO 2624; DMC 250; DMC 261; DMC 262 | Metal | - |
| 3 | materials | NF ISO 16700; ISO 527-1; ISO 527-2; ISO 527-4; PRT AM 807; PRT AM 808; PRT AM 750 | Matériaux compatibles avec une observation sous vide secondaire; Plastiques; Composites plastiques renforcés de fibres isotropes et orthotropes | - |
Ranges are reproduced from the accredited scope document as published. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in France
- METAL CONTROLMEAUX · ~537 kmCOFRACShares 2 accredited methods and materialsEN ISO 6507-1Metal
- A.U.E.M.THIANT · ~687 kmCOFRACShares 2 accredited methods and materialsEN ISO 6507-1Metal
- RESCOLL - PESSACPESSAC · ~4 kmCOFRACShares 1 accredited test methodISO 527-1
- RESCOLL - ROCHEFORTROCHEFORT · ~131 kmCOFRACShares 1 accredited materialMetal
- BUREAU VERITAS LABORATOIRES VILLARSVILLARS · ~132 kmCOFRACShares 1 accredited materialMetal
Accreditation data refreshed from the COFRAC register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the COFRAC entry linked above.