Przedsiębiorstwo Badań i Analiz Energetycznych ENERGOTHERM
ul. Poznańska 5, 62-081, Przeźmierowo, Poland
- Accredited standards
- 31
- PCA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the PCA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 31 standard numbers and the 26 official names we hold. When no standard matches, it searches the method text of every scope line.
EN14
EN 1911Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method
EN 1948-1Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
EN 1948-4
EN 12619Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
EN 13211Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
EN 13284-1Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
EN 13649
EN 14181Stationary source emissions - Quality assurance of automated measuring systems
EN 14385Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V
EN 14789Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
EN 14790Stationary source emissions - Determination of the water vapour in ducts - Standard reference method
EN 14791Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
EN 14792Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: Chemiluminescence
EN 15058Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry
ISO13
ISO 3744Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane
ISO 3746Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
ISO 7935Stationary source emissions - Determination of the mass concentration of sulfur dioxide in flue gases - Performance characteristics of automated measuring systems
ISO 9612Acoustics - Determination of occupational noise exposure - Methodology
ISO 9613-2Acoustics - Attenuation of sound during propagation outdoors - Part 2: Engineering method for the prediction of sound pressure levels outdoors
ISO 10396Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
ISO 10494Turbines and turbine sets - Measurement of emitted airborne noise - Engineering/survey method
ISO 11338-1Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 1: Sampling
ISO 12039Stationary source emissions - Determination of the mass concentration of carbon monoxide, carbon dioxide and oxygen in flue gas - Performance characteristics of automated measuring systems
ISO 15713Stationary source emissions - Sampling and determination of gaseous fluoride content
ISO 16911-1Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method
ISO 21258Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method
ISO 21877Stationary source emissions— Determination of the mass concentration of ammonia - Manual method
Other standards4
DIN 45635-46
DIN 45635-47
PN-N-01307:1994Hałas - Dopuszczalne wartości hałasu w środowisku pracy - Wymagania dotyczące wykonywania pomiarów
PN-Z-04030-7:1994
ISO 10396:2007; PN-EN 14790:2017-04; PN-EN 14791:2017-04; PN-EN 1911:2011; ISO 15713:2006; PN-EN 13211:2006; PN-EN 14385:2005
PN-EN 14181:2015; ISO 10396:2007; PN-EN ISO 21258:2010; PN-EN 1911:2011; ISO 15713:2006; CEN/TS 17340:2020-09; PN-EN 13211:2006; PN-EN ISO 21877:2020-03; ISO 12039:2019
PN-EN 12619:2013-05; PN-EN 1948-1:2006; PN-EN 1948-4+A1:2014-03; PN-EN 13649:2005; PN-Z-04030-7:1994; ISO 10396:2007; PN-EN ISO 21877:2020-03; VDI 2462-2:2011; PN-ISO 10396:2001
PN-EN 14792:2017; PN-ISO 10396:2001; PN-EN 15058:2017; PN-ISO 10396:2001; PN-EN 14789:2017; PN-ISO 10396:2001; PN-ISO 10396:2001; PN-ISO 10396:2001; PN-EN 14385:2005; PN-EN 1948-4+A1:2014-03; ISO 11338-1:2003; PN-EN ISO 21258:2010; CEN/TS 17340:2020-09
VDI 3486 Blatt 2:1979; PN-EN 14181:2015; PN-Z-04030-7:1994; PN-EN 13284-1:2018-02; PN-EN 14791:2017-04; PN-EN 14792:2017; PN-EN 15058:2017; PN-EN 14789:2017; PN-EN 14790:2017-04; PN-EN 12619:2013-05
PN-EN ISO 16911-1:2013-07; PN-Z-04030-7:1994; PN-EN 13284-1:2018-02; ISO 10396:2007; PN-ISO 7935:2000; PN-EN 14792:2017; ISO 12039:2019; PN-EN 15058:2017; PN-EN 14789:2017
PN-EN ISO 3746:2011+Ap1:2017-09; PN-EN ISO 3744:2011; DIN 45635-46:1985-06; DIN 45635-47:1985-06; ISO 10494:2018; Załącznik nr 7 do rozporządzenia Ministra Klimatu i Środowiska z dnia 07.09.2021 r. (Dz. U. z 2023 r. poz. 1706); PN ISO 9613-2:2002; PN-N-01307: 1994; PN-EN ISO 9612:2011
Read from the PCA scope document we downloaded on 2026-03-13. Register refreshed 2026-11-06.
Scope as published by PCA
8 lines
ISO/IEC 17025
ActiveAB 1624
The scope document we hold says it is valid until 2028-09-14.
Accredited scope, certificate AB 1624
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | - | waste gases; noise in the workplace; noise at general environmentShow page textExtracted from the scope document; tables may not line up. View scope for the original. PCA Zakres akredytacji Nr AB 1624
Scope of accreditation No. AB 1624
ZAKRES AKREDYTACJI
LABORATORIUM BADAWCZEGO
SCOPE OF ACCREDITATION FOR TESTING LABORATORY
Nr/No. AB 1624
wydany przez / issued by
POLSKIE CENTRUM AKREDYTACJI
01-382 Warszawa, ul. Szczotkarska 42
Wydanie/Issue 15 z/of 24.07.2025
KIEROWNIK DZIAŁU AKREDYTACJI
BADAŃ EMISJI W ŚRODOWISKU
MARCIN BEKAS
Niniejszy dokument jest załącznikiem do Ce rtyfikatu Akredytacji Nr AB 1624 z dnia 18.10.2019 r.
Cykl akredytacji od 09.08.2024 r. do 14.09.2028 r.
Status akredytacji oraz aktualność zakresu akredytacji można potwierdzić na stronie internetowej PCA www.pca.gov.pl
This document is an annex to accreditation certificate No AB 1624 of 18.10.2019
Accreditation cycle from 09.08.2024 to 14.09.2028
The status of accreditation and validity of the scope of accreditation can be confirmed at PCA website www.pca.gov.pl
Wydanie nr / Issue No 15, 24.07.2025 r. 1/9
Nazwa i adres / Name and address
Przedsiębiorstwo Badań i Analiz Energetycznych
ENERGOTHERM Sp. z o.o.
LABORATORIUM BADAWCZE
ul. Poznańska 5
62 – 081 Przeźmierowo
Kod identyfikacyjny /
Identification code *) Dziedzina i przedmiot badań / Field of testing and item:
- A/13
- C/36/P
- Badania akustyczne – maszyny i urządzenia / Acoustic tests of machinery and devices
- Badania chemiczne i pobieranie próbek gazów odlotowych / Chemical tests and sampling of waste
gases
- G/33, G/34, G/36,
- M/13, M/58
- Badania dotyczące inżynierii środowiska (środowiskowe i klimatyczne) – gazy odlotowe, hałas
w środowisku pracy, hałas w środowisku ogólnym / Tests concerning environmental engineering
(environmental and climatic) - waste gases, noise in the workplace, noise at gene ral environment
- Badania inne - QAL2 i AST automatycznych systemów monitoringu (AMS) / Other tests - QAL2 and
AST of automated measuring systems (AMS)
- N/36/P - Badania właściwości fizycznych i pobieranie próbek gazów odlotowych / Tests of physical properties
and sampling of waste gases
- P/36 - Pobieranie próbek gazów odlotowych / Sampling of waste gases
Wersja strony/Page version: A
*) Kod identyfikacyjny zgodnie z załącznikiem do dokumentu DAB -07 dostępnym na stronie internetowej www.pca.gov.pl /
The identification code according to the Annex to document DAB -07, available at PCA website www.pca.gov.pl
AB 1624 | - |
| 2 | PN-EN ISO 16911-1:2013-07; PN-Z-04030-7:1994; PN-EN 13284-1:2018-02; ISO 10396:2007; PN-ISO 7935:2000; PN-EN 14792:2017; ISO 12039:2019; PN-EN 15058:2017; PN-EN 14789:2017 | Flue gas | 0.001 to 100 g/m3 |
| 3 | ISO 10396:2007; PN-EN 14790:2017-04; PN-EN 14791:2017-04; PN-EN 1911:2011; ISO 15713:2006; PN-EN 13211:2006; PN-EN 14385:2005 | Flue gas | See scope document |
| 4 | PN-EN 12619:2013-05; PN-EN 1948-1:2006; PN-EN 1948-4+A1:2014-03; PN-EN 13649:2005; PN-Z-04030-7:1994; ISO 10396:2007; PN-EN ISO 21877:2020-03; VDI 2462-2:2011; PN-ISO 10396:2001 | Flue gas | See scope document |
| 5 | PN-EN 14792:2017; PN-ISO 10396:2001; PN-EN 15058:2017; PN-ISO 10396:2001; PN-EN 14789:2017; PN-ISO 10396:2001; PN-ISO 10396:2001; PN-ISO 10396:2001; PN-EN 14385:2005; PN-EN 1948-4+A1:2014-03; ISO 11338-1:2003; PN-EN ISO 21258:2010; CEN/TS 17340:2020-09 | Flue gas | See scope document |
| 6 | VDI 3486 Blatt 2:1979; PN-EN 14181:2015; PN-Z-04030-7:1994; PN-EN 13284-1:2018-02; PN-EN 14791:2017-04; PN-EN 14792:2017; PN-EN 15058:2017; PN-EN 14789:2017; PN-EN 14790:2017-04; PN-EN 12619:2013-05 | Flue gas | See scope document |
| 7 | PN-EN 14181:2015; ISO 10396:2007; PN-EN ISO 21258:2010; PN-EN 1911:2011; ISO 15713:2006; CEN/TS 17340:2020-09; PN-EN 13211:2006; PN-EN ISO 21877:2020-03; ISO 12039:2019 | Automatyczne Systemy Monitoringu (AMS) | See scope document |
| 8 | PN-EN ISO 3746:2011+Ap1:2017-09; PN-EN ISO 3744:2011; DIN 45635-46:1985-06; DIN 45635-47:1985-06; ISO 10494:2018; Załącznik nr 7 do rozporządzenia Ministra Klimatu i Środowiska z dnia 07.09.2021 r. (Dz. U. z 2023 r. poz. 1706); PN ISO 9613-2:2002; PN-N-01307: 1994; PN-EN ISO 9612:2011 | Maszyny i urządzenia w tym wieże chłodnicze, kominy, turbiny i turbozespoły | See scope document |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in Poland
- Zakład Wykonywania Pomiarów EMITOROpole · ~210 kmPCAShares 5 accredited methods and materialsEN 12619:2013-05EN ISO 9612:2011ISO 10396:2001
- "Energopomiar"Gliwice · ~270 kmPCAShares 5 accredited methods and materialsEN 12619:2013-05ISO 10396:2001PN-EN 1911:2011
- CE2 Tech Consulting M. Dziewa i Wspólnicy Sp. j.Toruń · ~138 kmPCAShares 4 accredited methods and materialsEN 12619:2013-05PN-EN 1911:2011PN-Z-04030-7:1994
- EKOLAB Sp. z o.o.Kobylnica · ~224 kmPCAShares 4 accredited methods and materialsISO 10396:2001PN-EN 1911:2011PN-Z-04030-7:1994
- SBB Laboratorium Badań i EkspertyzKatowice · ~290 kmPCAShares 4 accredited methods and materialsEN 12619:2013-05ISO 10396:2001PN-Z-04030-7:1994
Accreditation data refreshed from the PCA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the PCA entry linked above.