Acuren Group
Richmond, Canada
Free. We check which accredited labs can do it, starting with this one, and reply within two working days with who can do it, how fast, and roughly what it costs.
Only the laboratory you pick gets your contact details. We ask the others without them.
Contact this laboratory
Work at Acuren Group?
Claim this profile to keep it accurate.
Register record
- A2LARefreshed
- 3977.03Active
Accredited standards
We have not yet extracted the standard numbers from this lab’s scope document. The scope text we hold is below.
Scope as published by A2LA
4 lines
ISO/IEC 17025
Active3977.03
The scope document we hold says it is valid until 2027-12-31.
Accredited scope, certificate 3977.03
This scope has not been split into individual lines yet. Below is the text of the scope document as published.
Part 1 of 4
(A2LA Cert No. 3977.03) 01/27/2026 Page 1 of 3 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 ACUREN GROUP INC. 12271 Horseshoe Way Richmond, BC, Canada V7A 4V4 Jason Light Email: Jason.Light@acuren.com Phone: 604 448 3862 MECHANICAL Valid To: December 31, 2027 Certificate Number: 3977.03 In recognition of the successful completion of the A2LA Accreditation Program, accreditation is granted to this laboratory to perform the following tests on metals: Test: Test Methods: Chemical Analysis Chemical Analysis of Alloys with Optical Emission Spectroscopy (OES) (Base Metals: Al, Co, Cu, Fe, Pb, Ni, Mg, Sn, Zn, and Ti) ASTM E1009, E415, E485, E1999, E1806, E227, E1251, E2371, E3047; BS EN15079 Scanning Electron Microscopy (EDXA) ASTM E1508 Mechanical Testing Brinell Hardness (500/1500/3000kg) ASTM E10 Macro-Vickers (1-10kg) ASTM E92 Microhardness (HV 100 -1000g) ASTM E384, E92 Rockwell Hardness (HRBW, HRC, HR30N, HR30TW) ASTM A370, E18, F606/F606M Tensile/Tension (Room Temperature, <= 120 klbs) ASTM A370, A1061, B557, E8/E8M; ASME Section IX QB/QW-150; ASME Section II A SA 370; Lloyd's Rules Section 2, ABS Section 2 Bend ASTM A370; ASME SA-370, ASME Section IX QB/QW-160; CSA W47.1; ASTM E290; CSA Z662 – Section 7, Lloyd’s Rules Section 2, ABS Section 2 Impact (Charpy) ASTM A370, E23; ASME SA-370, ASME Section VIII UG-84, CSA W47.1-09, Lloyd's Rules Section 2, ABS, Section 2
Part 2 of 4
(A2LA Cert No. 3977.03) 01/27/2026 Page 2 of 3 Test: Test Methods: Mechanical Testing (continued) Notch Toughness ASME Section IX, QW-170 Nick Break CSA Z-662 Section 7; API 1104; AWS B4.0 Section 6 Ductility (Bend) ASTM E290; ASTM E190 Hot-Dip Galvanized Embrittlement test ASTM A143 Feritscope EN/ISO 17655; AWS A4.2M Weld and Braze Evaluation and Qualification ASME SECTION IX Part QW and QB; CSA W47.1, W47.2, W59.1, W59.2; API 1104; AWS D1.1/D1.1M Section 4, D1.2/D1.2M Section 3, D1.4/D1.4M Section 6, D1.5/D1.5M Section 5, D1.6/D1.6M Section 6, D1.7/D1.7M Section 4, D1.8 Sections 5 & 6, D1.9/D1.9M Section 3, D14.1/D14.1M Section 9, D14.4/D14.4M Section 7, D14.6/D14.6M Section 6, D15.1/D15.1M Sections 10 - 12, D17.1/D17.1M Section 5, B2.1/B2.1M Sections 4 - 5, B2.2/B2.2M Sections 4 - 5; ISO 15614-1; BS EN287-1, 287-2, 288-3, 288-4; ASTM A488; MIL-STD-248D; NAVSEA S9074-AQ-GIB-010; ANSI/AASHTO/AWS D1.5 Section 5; NACE MR0175/ISO15156-1, 15156-2, 15156-3; MIL-STD 1595A, 2219, 1261; Lloyd's Rules, ABS Corrosion/ Environmental Testing Pitting and Crevice Corrosion Resistance ASTM G48, A923 Immersion Corrosion ASTM G31 Intergranular Attack – Stainless Steel ASTM A262 Metallography Preparation of Specimens ASTM E3 Case Depth AGMA2004 Microstructure ASTM A247 Microetch ASTM E407 Macroetch ASTM A604, A561, E340, E381
Part 3 of 4
(A2LA Cert No. 3977.03) 01/27/2026 Page 3 of 3 Test: Test Methods: Metallography (continued) Inclusion Content ASTM E45 (Excluding Macroscopic Method); SAE J422 Average Grain Size ASTM E112 (Excluding Shepherd Fracture Grain Size Method) Volume Fraction by Systematic Manual Point Count ASTM E562 Volume Fraction by Image Analysis ASTM E1245 Coating Thickness by Cross Section ASTM B487 Coatings Weight ASTM A90 Failure Analysis ASTM E860, E1020, E1188, E1492; ASM Handbook 11, and the test methods listed on this Scope Dimensional Testing1: Parameter Range CMC Technique/ Method Linear 2 Work Piece Measurement Up to 1 in Up to 6 in .0003” .0015” Micrometer Caliper 1 This laboratory offers commercial dimensional testing service only. 2 This test is not equivalent to that of a calibration. The laboratory is accredited for the test methods listed above. The accredited test methods are used in determining compliance with the material specifications listed below; however, the inclusion of these material specifications on this Scope does not confer laboratory accreditation to the material specifications. Inclusion of these material specifications on this Scope also does not confer accreditation for every method embedded within the specification. Only the methods listed above on this Scope are accredited. ASTM A653M, ASTM D618, CSA G40.20, CSA G40.21, CSA Z245.1, CSA Z245.11, CSA Z245.12, CSA Z245.15, SAE J429, J1199, API 5CT, API 5C7, API 5D, API 5L, API 5LC, API 5LS, API 5LX, API 6A, API 7, API 7K, API 7-1, API 9A, API 11B, API 12C, API 650, Lloyd's rules, ABS rules, DNV rules.
Text extracted from the accredited scope document. Layout and tables from the original may not carry over; the scope document itself is the authoritative copy.
Other Locations
16 other sites in this organization
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.