Techmer PM Analytical and
#1 Quality Circle, 37716, Clinton, TN, United States
Visit website- Accredited standards
- 28
- A2LA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 28 standard numbers and the 11 official names we hold. When no standard matches, it searches the method text of every scope line.
ASTM18
ASTM D256
ASTM D257
ASTM D523Standard Test Method for Specular Gloss
ASTM D618
ASTM D638Standard Test Method for Tensile Properties of Plastics
ASTM D648
ASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D882
ASTM D955
ASTM D1238
ASTM D1525
ASTM D1894
Show all 18
ASTM D3418
ASTM D3835
ASTM D3895
ASTM D4329
ASTM D5630
ASTM G155
ISO8
ISO 75-1Plastics - Determination of temperature of deflection under load - Part 1: General test method
ISO 75-2Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite
ISO 178Plastics - Determination of flexural properties
ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
ISO 180Plastics - Determination of Izod impact strength
ISO 291Plastics - Standard atmospheres for conditioning and testing
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 1183-3Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method
Other standards2
AATCC 16
SAE J2527
ASTM D256; ISO 180/A; ASTM D523; ASTM D618; ISO 291; ASTM D638; ISO 527-1,-2,-4, -5; ASTM D648, Method B; ASTM D790; ISO 178; ISO 75-1, ISO 75-2; ASTM D1238; ISO 179-1, Type A; UL-94 (Except Section 10); NFPA 701; ASTM D882
SAE J2412; SAE J2527; ASTM D5630, Procedure B; ASTM D3418; ASTM D3895; ASTM D4329; ASTM G155; ASTM D1894; AATCC TM 16; ASTM D955; ISO 1183-3; ASTM D1525; ASTM D3835; ASTM D257
Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.
Scope as published by A2LA
3 lines
ISO/IEC 17025
Active2844.01
The scope document we hold says it is valid until 2027-05-31.
Accredited scope, certificate 2844.01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ASTM D256; ISO 180/A; ASTM D523; ASTM D618; ISO 291; ASTM D638; ISO 527-1,-2,-4, -5; ASTM D648, Method B; ASTM D790; ISO 178; ISO 75-1, ISO 75-2; ASTM D1238; ISO 179-1, Type A; UL-94 (Except Section 10); NFPA 701; ASTM D882 | Plastics | - |
| 2 | SAE J2412; SAE J2527; ASTM D5630, Procedure B; ASTM D3418; ASTM D3895; ASTM D4329; ASTM G155; ASTM D1894; AATCC TM 16; ASTM D955; ISO 1183-3; ASTM D1525; ASTM D3835; ASTM D257 | Plastics | - |
| 3 | Extracted from the scope document; tables may not line up. View scope for the original. For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation.
Accredited Laboratory
A2LA has accredited
TECHMER PM ANALYTICAL AND TESTING LABORATORY
Clinton, TN
for technical competence in the field of
Mechanical Testing
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates
technical competence for a defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
Presented this 9th day of June 2025.
_______________________
Mr. Trace McInturff, Vice President, Accreditation Services
For the Accreditation Council
Certificate Number 2844.01
Valid to May 31, 2027 | ||
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in United States
- Advanced Composites, Inc. Tennessee Facility - Main PlantNashville, TN · ~236 kmA2LAShares 2 accredited methods and materialsASTM D256Plastics
- Advanced Composites, Inc. Tennessee Facility - EngineeringNashville, TN · ~236 kmA2LAShares 2 accredited methods and materialsASTM D256Plastics
- Riverview Calibration Services,Belpre, OH · ~418 kmA2LAShares 2 accredited methods and materialsASTM D256Plastics
- Advanced Composites, Inc. Ohio Facility - EngineeringSidney, OH · ~466 kmA2LAShares 2 accredited methods and materialsASTM D256Plastics
- DatapointLabsIthaca, NY · ~960 kmA2LAShares 2 accredited methods and materialsASTM D256Plastics
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.