FindTestingLabs
Registers refreshed 2026-10-25.See refresh dates
Spain

SAIOTEK, S.L. (Unipersonal)

POLIGONO KATAIDE nº16, 20500, Mondragón, Spain

ENAC 1494/LE2727ISO/IEC 17025Register refreshed 2026-10-10
Request a quoteFree

We check which accredited labs can do it, starting with this one, and send you a short comparison within three working days: who can do it, how fast, and roughly at what cost.

  • No lab gets your contact details until you tell us which ones you want to hear from.
Accredited standards
19
ENAC certificate
1
Site in our directory
1
ENAC accredited scope

What this lab is accredited for

Our reading of the ENAC scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 19 standard numbers and the 19 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO14
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 898-1Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread
ISO 3506-1Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes
ISO 4136Destructive tests on welds in metallic materials - Transverse tensile test
ISO 5173Destructive tests on welds in metallic materials - Bend tests
ISO 5178Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints
ISO 5817Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 9015-1Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints
ISO 9016Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
ISO 9017Destructive tests on welds in metallic materials - Fracture test
ISO 17639Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
ASTM5
ASTM A370Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM E8Standard Test Methods for Tension Testing of Metallic Materials
ASTM E23Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E92Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
ASTM E384Standard Test Method for Microindentation Hardness of Materials

Read from the scope as published by ENAC. Register refreshed 2026-10-10.

Scope as published by ENAC

3 lines
ENAC

ISO/IEC 17025

Active

1494/LE2727

View scope

Accredited scope, certificate 1494/LE2727

LineMethodMatrixRange
1UNE-EN ISO/IEC 17025:2017; ASTM E-10; UNE-EN-ISO 6506-1; ASTM A370; ASTM E92; ASTM E384; UNE EN ISO 6507-1; ASTM E8; UNE EN ISO 6892-1; UNE EN ISO 148-1; ASTM E23Materiales metálicos; Metallic materials-
2UNE EN ISO 5178; ASTM E8; UNE EN ISO 6892-1; ASME IX:QW 150; UNE EN ISO 4136; ASTM E92; ASTM E384; UNE EN ISO 6507-1; UNE EN ISO 9015-1; UNE EN ISO 148-1; ASME IX:QW170; UNE EN ISO 9016; ASTM E23; ASME IX:QW160; UNE EN ISO 5173; UNE EN ISO 9017; UNE EN ISO 17639; UNE EN ISO 5817; ASME IX:QW183+QW184Uniones soldadas; Welded jointsto 500 kN
3UNE EN ISO 898-1; UNE EN ISO 6892-1; UNE EN ISO 6507-1; UNE-EN-ISO 6506-1; UNE EN ISO 148-1; UNE EN ISO 3506-1Carbon steel and alloy steel fasteners; Stainless steel fastenersto 500 kN

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

POLIGONO KATAIDE nº16, Mondragón, 20500, ES

43.06568, -2.49008

Open in Maps
← All accredited testing labs in Spain

Labs with overlapping accredited scope in Spain

Accreditation data refreshed from the ENAC register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ENAC entry linked above.