SHPP US
Properties and Specifications Laboratory, 1 Noryl Avenue, 12158, Selkirk, NY, United States
Visit website- Accredited standards
- 27
- A2LA certificate
- 1
- Sites in our directory
- 3
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 27 standard numbers and the 18 official names we hold. When no standard matches, it searches the method text of every scope line.
ASTM12
ASTM D256
ASTM D570
ASTM D618
ASTM D638Standard Test Method for Tensile Properties of PlasticsExclusion
Limits written next to it
Tensile Properties (Except Poissons) ASTM D638
ASTM D648
ASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D792Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D955
ASTM D1238
ASTM D3418
ASTM D3763
ASTM E831
ISO12
ISO 62Plastics - Determination of water absorption
ISO 75-1Plastics - Determination of temperature of deflection under load - Part 1: General test method
ISO 75-2Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite
ISO 178Plastics - Determination of flexural properties
ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
ISO 180Plastics - Determination of Izod impact strength
ISO 291Plastics - Standard atmospheres for conditioning and testing
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 11359-1Plastics - Thermomechanical analysis (TMA) - Part 1: General principles
ISO 11359-2Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
ISO 11357 series3
ISO 11357-1Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
ISO 11357-2Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height
ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ASTM D3418; ISO 11357-1; ISO 11357-2; ISO 11357-3; ASTM E831; ISO 11359-1; ISO 11359-2; ASTM D618; ISO 291; ASTM D648 (Method B); ISO 75-1; ISO 75-2; ASTM D792 (Method A); ISO 1183-1 (Method A); ISO 179-1 IeA; ISO 179-1 IeU; ASTM D790; ISO 178; ASTM D1238; ISO 1133-1; ASTM D3763; ASTM D955 (Type A and B); ASTM D256 (Method A); ISO 180 IA; ISO 180 IU; ASTM D638; ISO 527; ASTM D570; ISO 62
Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.
Scope as published by A2LA
2 lines
ISO/IEC 17025
Active1084.01
The scope document we hold says it was valid until 2026-03-31. That date has passed, so our copy may be out of date. We downloaded it from the A2LA register on 2026-03-14. Check the A2LA register for the current scope.
Accredited scope, certificate 1084.01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ASTM D3418; ISO 11357-1; ISO 11357-2; ISO 11357-3; ASTM E831; ISO 11359-1; ISO 11359-2; ASTM D618; ISO 291; ASTM D648 (Method B); ISO 75-1; ISO 75-2; ASTM D792 (Method A); ISO 1183-1 (Method A); ISO 179-1 IeA; ISO 179-1 IeU; ASTM D790; ISO 178; ASTM D1238; ISO 1133-1; ASTM D3763; ASTM D955 (Type A and B); ASTM D256 (Method A); ISO 180 IA; ISO 180 IU; ASTM D638; ISO 527; ASTM D570; ISO 62 | Plastics | - |
| 2 | Extracted from the scope document; tables may not line up. View scope for the original. For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation.
Accredited Laboratory
A2LA has accredited
SHPP US LLC
Selkirk, NY
for technical competence in the field of
Mechanical Testing
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates
technical competence for a defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
Presented this 18th day of October 2024.
_______________________
Mr. Trace McInturff, Vice President, Accreditation Services
For the Accreditation Council
Certificate Number 1084.01
Valid to March 31, 2026
Revised February 25, 2026 | ||
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Properties and Specifications Laboratory, 1 Noryl Avenue, Selkirk, NY, 12158, US
42.53230, -73.79846
Open in MapsOther Locations
2 other sites in this organization
Labs with overlapping accredited scope in United States
- DatapointLabsIthaca, NY · ~226 kmA2LAShares 2 accredited methods and materialsASTM D3418Plastics
- Advanced Composites, Inc. Ohio Facility - EngineeringSidney, OH · ~900 kmA2LAShares 2 accredited methods and materialsASTM D3418Plastics
- Cambridge Polymer Group,Woburn, MA · ~217 kmA2LAShares 1 accredited materialPlastics
- Advanced Plastic and Material TestingIthaca, NY · ~219 kmA2LAShares 1 accredited materialPlastics
- Element Materials Technology BaltimoreHunt Valley, MD · ~414 kmA2LAShares 1 accredited test methodASTM D3418
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.