Registers refreshed 2026-11-08.See refresh dates
United States

leggett & platt

Detroit, MI, United States

A2LA 7230.01A2LA 7230.02ISO/IEC 17025Register refreshed 2026-11-06
One of 2 sites of this organization in our directory. View the organization

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
14
A2LA certificates
2
Sites in our directory
2
A2LA accredited scope

What this lab is accredited for

Our reading of the A2LA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 14 standard numbers and the 13 official names we hold. When no standard matches, it searches the method text of every scope line.

IEC 60068 series4
IEC 60068-2-27Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 60068-2-38Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
IEC 60068-2-64Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance

Certificate says EN 60068-2-64. Probably the same standard; not checked against the EN document.

IEC 60068-2-78Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
ISO3
ISO 10605Road vehicles - Test methods for electrical disturbances from electrostatic discharge
ISO 11452-1Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology
ISO 11452-4Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
ISO 16750 series3
ISO 16750-2Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads
ISO 16750-3Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 3: Mechanical loads
ISO 16750-4Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads
ISO 7637 series3
ISO 7637-1Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Vocabulary and general considerations
ISO 7637-2Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
ISO 7637-3Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
Other standards1
ASTM D4728

Read from the A2LA scope documents we downloaded on 2026-08-05 and 2026-10-27. Register refreshed 2026-11-06.

Scope as published by A2LA

5 lines
A2LA

ISO/IEC 17025

Active

7230.01

The scope document we hold says it is valid until 2028-06-30.

View scope

Accredited scope, certificate 7230.01

LineMethodMatrixRange
1ISO 10605 Amd 1 2014, Sections 8 and 9; ISO 10605:2008/Amd 1 2014, Sections 8 and 9; ISO 10605:2023; CISPR 25, Sections 6.3, 6.4 and 6.5; CISPR 25 (2016), Sections 6.3, 6.4 and 6.5; ISO 11452-1; ISO 11452-1 (2015); ISO 11452-4, Section 6.1; ISO 11452-4 (2011), Section 6.1; ISO 7637-1; ISO 7637-2; ISO 7637-2 (2004, 2011); ISO 7637-3; ISO 7637-3 (2016); ISO 16750-2, Sections 4.2, 4.3.1.2, 4.5, 4.6, 4.7, 4.8, 4.9 and 4.10.2; ISO 16750-2 2010-03, Sections 4.2, 4.3.1.2, 4.5, 4.6, 4.7, 4.8, 4.9 and 4.10.2; ISO 7637-2; ISO 7637-2 2004-06DC Motor; DC Pump; Pneumatic Valve; Sensor; Electronic Control Unit (ECU); Lumbar System; Seat-
2ISO/IEC 17025:2017--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

A2LA

ISO/IEC 17025

Active

7230.02

The scope document we hold says it is valid until 2028-06-30.

View scope

Accredited scope, certificate 7230.02

LineMethodMatrixRange
1FCA CS.00056; Ford CEPT:00:00-E-412; GMW31721; GMW3191; USCAR-2; USCAR-21; MIL-STD-810 (G, H); MIL-STD-202 (G, H); JDQ 53.3; Hyundai/KIA ES95400-10; ISO 16750-4; IEC 60068-2-38; IEC 60068-2-78; EPS-24126248; EPS-24138553air-60 to 180 °C
2TL-6172; TL-6550; EPS-24126248; EPS-24138553; Ford CETP:00.00-E-412; ASTM D4728; FCA CS.00056; Ford CEPT: 00:00-E-412; GMW 31721; GMW 3191; Hyundai/KIA ES95400-10; IEC 60068-2-27; IEC 60068-2-64; ISO 16750-3; JDQ 53.3; JIS D 1601; MIL-STD-202 (G, H) Methods 204; MIL-STD-810 (G, H) Methods 514; IPC-TM-650 (Methods 2.1.1, 2.1.2, 2.1.5, and 2.1.10)--
3ISO/IEC 17025:2017--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Detroit, MI, US

42.33155, -83.04664

Open in Maps

Other Locations

1 other site in this organization

Detroit, MI, US
View
← All accredited testing labs in Michigan
← All accredited testing labs in United States

Labs with overlapping accredited scope in United States

Accreditation data refreshed from the A2LA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.